Aromatic halides, oxidative addition

The reactions of the second class are carried out by the reaction of oxidized forms[l] of alkenes and aromatic compounds (typically their halides) with Pd(0) complexes, and the reactions proceed catalytically. The oxidative addition of alkenyl and aryl halides to Pd(0) generates Pd(II)—C a-hondi (27 and 28), which undergo several further transformations. 

Aromatic acyl halides and sulfonyl halides undergo oxidative addition, followed by facile elimination of CO and SO2 to form arylpalladium complexes. Benzenediazonium salts are the most reactive source of arylpalladium complexes. 

Success of the reactions depends considerably on the substrates and reaction Conditions. Rate enhancement in the coupling reaction was observed under high pressure (10 kbar)[l 1[. The oxidative addition of aryl halides to Pd(0) is a highly disfavored step when powerful electron donors such as OH and NHt reside on aromatic rings. Iodides react smoothly even in the absence of a... 

As reported in Scheme 1 the process involves a series of steps. The alkylpalladium species 1 forms through oxidative addition of the aromatic iodide to palladium(O) followed by noibomene insertion (4-7). The ready generation of complex 2 (8-11) from 1 is due to the unfavourable stereochemistry preventing P-hydrogen elimination from 1 (12). Complex 2 further reacts with alkyl halides RX to form palladium(IV) complex 3 (13-15). Migration of the R group to the... 

Low-valent nickel complexes of bpy are also efficient electrocatalysts in the reductive coupling reaction of aromatic halides.207 Detailed investigations are in agreement with a reaction mechanism involving the oxidative addition (Equation (40)) of the organic halide to a zero valent complex.208-210 Starting from [Nin(bpy)2(X)2]0 with excess bpy, or from [Nin(bpy)3]2 +, results in the [Ni°(bpy)2]° complex (Equations (37) and (38)). However, the reactive complex is the... 

Oxidative addition occurs readily with allylic halides. Donor ligands (tertiary phosphines, bipyridyl, halide ions) and anionic complexes are required for activation of aromatic and vinyl halides (4, 70). Certain aliphatic halides are also reactive. The intermediate species R—Ni—X... 

Nickel halides and nickel complexes resulting from oxidative addition can also give rise to subsequent replacement and insertion reactions. Replacement reactions have been described mainly with arylnickel halide complexes (examples 23, 29, and 31, Table III). Carbanionic species replace halide ions and can undergo coupling or insertion reactions. An example of application of a carbanionic reaction to the synthesis of a natural product is the coupling step between an aromatic iodo-derivative and an active methylene group to form cephalotaxinone (example 23, Table III). 

I, Table X) requires tertiary phosphine-nickel halide or tertiary phosphine-nickel carbonyl complexes at 140-170°C. This implies oxidative addition of aromatic halides to nickel, replacement of the halide with amines, and reductive elimination. 

Carbonylation of aromatic halides is of great industrial interest and several efforts were made to produce the corresponding benzoic acids in aqueous (biphasic) reactions. The tendency of an aromatic C-X bond to react in an oxidative addition onto Pd(0) as required by the reaction mechanism (Scheme 5.4) decrease in the order X = I > Br > Cl so much that chloroarenes are notoriously unreactive in such reactions. 

Controlled-potential (E = —1.40 V/SCE) preparative electrolyses of FG-CgFLtX carried out in the presence of a catalytic amount of C0X2 indicate competition between the disproportionation of Co1 and the oxidative addition. For instance, the latter is preponderant when X=Br and FG = The aromatic halide is thus reduced into a mixture of ArH and Ar-Ar. The origin of ArH can be explained by the process shown in Scheme 14. 

Finally, the hybridization of the carbon atom also has a marked effect on its willingness to attach to the transition metal. Allyl or benzyl halides undergo oxidative addition faster than aromatic or vinyl halides. The least reactive are alkyl halides which require the use of nickel(O)9 complexes or highly active catalyst systems.10 If we start from an optically active substrate, then the oxidative addition usually proceeds in a stereoselective manner. 

The nickel-catalyzed transformation of aromatic halides into the corresponding nitriles by reaction with cyanide ions is reported. Both tris(triarylphosphine)nickel(0) complexes and tY2ins-chloro( aryl )bis( triarylphosphine )nickel(II) complexes catalyze the reaction. The influence of solvents, organophos-phines, and substituents on the aromatic nucleus on catalytic cyanation is studied. A mechanism of the catalytic process is suggested based on the study of stoichiometric cyanation of ti3ins-chloro(aryl)bis(triphenylphosphine)nickel-(II) complexes with NaCN and the oxidative addition reaction of Ni[P(C6H5)3]s with substituted aryl halides. 

Aromatic halides react with nickel(O) phosphine complexes at room temperature to yield complexes 1 (8, 13) by oxidative addition. We observed that arylnickel complexes 1 react with sodium cyanide to produce aromatic nitriles and the phosphine nickel(O) complexes, thus closing the catalytic cycle. 

Therefore it seems reasonable to assume that cyanation of aryl halides involves two fundamental processes oxidative addition of the tris(triphenylphosphine)nickel complex on the aromatic halide (Reaction 2) and cyanation of the arylnickel(II) complex 1 (Reaction 8). A further proof of the validity of this scheme is that both Ni[P(C6H5)3]3 and arylnickel (II) complexes 1 have an equal catalytic activity, these latter being intermediates of the catalytic process. Recent studies (22) on the influence of substituents on the aromatic halide in the oxidative addition reaction with Ni[P(C6H5)3]3 have given the results shown in Figure 4. 

Figure 4. Correlation of relative rates of oxidative addition of Ni[P(C6H5)3 3 to substituted aromatic halides with a constants (Id, 22)...

Low molecular weight aromatic ethers have been prepared principally by the condensation of phenolate salts with aromatic halides 82). The Ullmann condensation (81), which employs copper or its salts as catalysts has been used in most cases in the laboratory. Recently a modification of the Ullmann condensation which consists of heating copper (1) oxide, the free phenol, and the aromatic halide in s-collidine has been reported (3). This method is recommended for alkali-sensitive aromatic compounds. In addition, reaction of phenolate salts with copper (1) oxide and the aromatic halide in boiling N,N-dimethyl formamide is described. When the halogen is activated by electronegative groups as in -chloroni-... 

Innovations in the chemistry of aromatic compounds have occurred by recent development of many novel reactions of aryl halides or pseudohalides catalysed or promoted by transition metal complexes. Pd-catalysed reactions are the most important [2,29], The first reaction step is generation of the arylpalladium halide by oxidative addition of halide to Pd(0). Formation of phenylpalladium complex 1 as an intermediate from various benzene derivatives is summarized in Scheme 3.1. 

Mesylates are used for Ni-catalysed reactions. Arenediazodium salts 2 are very reactive pseudohalides undergoing facile oxidative addition to Pd(0). They are more easily available than aryl iodides or triflates. Also, acyl (aroyl) halides 4 and aroyl anhydrides 5 behave as pseudohalides after decarbonylation under certain conditions. Sulfonyl chlorides 6 react with evolution of SO2. Allylic halides are reactive, but their reactions via 7t-allyl complexes are treated in Chapter 4. Based on the reactions of those pseudohalides, several benzene derivatives such as aniline, phenol, benzoic acid and benzenesulfonic acid can be used for the reaction, in addition to phenyl halides. In Scheme 3.1, reactions of benzene as a parent ring compound are summarized. Needless to say, the reactions can be extended to various aromatic compounds including heteroaromatic compounds whenever their halides and pseudohalides are available. 

Aromatic carboxylic acids, a,/f-unsaturated carboxylic acids, their esters, amides, aldehydes and ketones, are prepared by the carbonylation of aryl halides and alkenyl halides. Pd, Rh, Fe, Ni and Co catalysts are used under different conditions. Among them, the Pd-catalysed carbonylations proceed conveniently under mild conditions in the presence of bases such as K2CO3 and Et3N. The extremely high toxicity of Ni(CO)4 almost prohibits the use of Ni catalysts in laboratories. The Pd-catalysed carbonylations are summarized in Scheme 3.9 [215], The reaction is explained by the oxidative addition of halides, and insertion of CO to form acylpalladium halides 440. Acids, esters, and amides are formed by the nucleophilic attack of water, alcohols and amines to 440. Transmetallation with hydrides and reductive elimination afford aldehydes 441. Ketones 442 are produced by transmetallation with alkylmetal reagents and reductive elimination. 

The reaction sequence in the vinylation of aromatic halides and vinyl halides, i.e. the Heck reaction, is oxidative addition of the alkyl halide to a zerovalent palladium complex, then insertion of an alkene and completed by /3-hydride elimination and HX elimination. Initially though, C-H activation of a C-H alkene bond had also been taken into consideration. Although the Heck reaction reduces the formation of salt by-products by half compared with cross-coupling reactions, salts are still formed in stoichiometric amounts. Further reduction of salt production by a proper choice of aryl precursors has been reported (Chapter III.2.1) [1]. In these examples aromatic carboxylic anhydrides were used instead of halides and the co-produced acid can be recycled and one molecule of carbon monoxide is sacrificed. Catalytic activation of aromatic C-H bonds and subsequent insertion of alkenes leads to new C-C bond formation without production of halide salt byproducts, as shown in Scheme 1. When the hydroarylation reaction is performed with alkynes one obtains arylalkenes, the products of the Heck reaction, which now are synthesized without the co-production of salts. No reoxidation of the metal is required, because palladium(II) is regenerated. 

The mechanism is very similar to that of the Stille coupling. Oxidative addition of the vinylic or aromatic halide to the palladium(O) complex generates a palladium(II) intermediate. This then undergoes a transmetallation with the alkenyl boronate, from which the product is expelled by reductive elimination, regenerating the palladium(O) catalyst. The important difference is the transmetallation step, which explains the need for an additional base, usually sodium or potassium ethoxide or hydroxide, in the Suzuki coupling. The base accelerates the transmetallation step leading to the borate directly presumably via a more nucleophilic ate complex,... 

The facility of arene reductive elimination underpins numerous C-C, C-O and C-N bond-forming reactions, which may be catalysed by late transition metals, in particular palladium (Figure 4.10). Although there are many variants, the general reaction scheme involves introduction of the aryl in electrophilic form via oxidative addition of an aryl halide (or sulfonate), substitution of the palladium halide by a nucleophile (which may also be carbon based) followed by reductive elimination. It is noteworthy that nucleophilic aromatic substitution in the absence of such catalysts can be difficult. 

---