Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Aqueous solutions solvation

Photoreductiom in Aqueous Solution. Solvated electrons form on the irradiation of natural water samples or of aqueous solutions of natural organic matter isolated from surface waters (12, 45, 46). The solvated electron is a powerful reductant that reacts rapidly with electronegative substances such as chlorinated, brominated, and iodinated compounds. The interaction of pho-toejected electrons and a halocarbon is demonstrated by the laser flash photolysis data shown in Figure 3. [Pg.267]

In analyzing the origin of enzyme catalysis, Warshel and others have advocated the importance of comparing the enzymatic reaction with a reference reaction in water [32]. In addition, it is also necessary to study the reference reaction in the gas phase in order to understand the intrinsic reactivity and the effect of solvation. Thus, to understand enzyme catalysis fully, we must compare results for the same reaction in the gas phase (intrinsic reactivity), in aqueous solution (solvation effects), and in the enzyme (catalysis). This is not possible when there is no model reaction for the uncatalyzed process in the gas phase and in water, or if the uncatalyzed reaction is a bimolecular process as opposed to a unimolecular reaction in the enzyme active site. None of these problems apply to the ODCase reaction. Furthermore, OMP decarboxylation is a unimolecular process, both in water and the enzyme, providing an excellent opportunity to compare directly the computed free energies of activation [1] this is the approach that we have undertaken [16]. Warshel et al. used an ammonium ion-orotate ion pair fixed at distances of 2.8 or 3.5 A as the reference reaction in water to mimic an active site lysine residue [32]. [Pg.127]

Sim J, Bousquet D, Forbert H, Marx D (2010) Glycine in aqueous solution solvation shells, interfacial water, and vibrational spectroscopy from ab initio molecular dynamics. J Chem Phys 133 114508... [Pg.61]

In an aqueous solution, solvated hydrogen ions (hydro-nium ions, H3O ) react with hydroxide ions (OH") formed from the alkali to make two molecules of water. A salt is also formed. In non-aqueous reactions, water is not always formed however, there is always a donation of protons (see Bronsted-Lowry acid-base theory). [Pg.6]

Figure Bl.20.8. DLVO-type forces measured between two silica glass surfaces in aqueous solutions of NaCl at various concentrations. The inset shows the same data in the short-range regime up to D = 10 mn. The repulsive deviation at short range (<2 nm) is due to a monotonic solvation force, which seems not to depend on the salt concentration. Oscillatory surface forces are not observed. With pemiission from [73]. Figure Bl.20.8. DLVO-type forces measured between two silica glass surfaces in aqueous solutions of NaCl at various concentrations. The inset shows the same data in the short-range regime up to D = 10 mn. The repulsive deviation at short range (<2 nm) is due to a monotonic solvation force, which seems not to depend on the salt concentration. Oscillatory surface forces are not observed. With pemiission from [73].
H3O" is strictly the oxonium ion actually, in aqueous solutions of acid this and Other solvated-proton structures exist, but they are conveniently represented as... [Pg.85]

Cramer C j and D G Truhlar 1992. AM1-SM2 and PM3-SM3 Parametrized SCF Solvation Models for Free Energies in Aqueous Solution. Journal of Computer-Aided Molecular Design 6 629-666. [Pg.650]

The one-electron reduction of thiazole in aqueous solution has been studied by the technique of pulse radiolysis and kinetic absorption spectrophotometry (514). The acetone ketyl radical (CH ljCOH and the solvated electron e were used as one-electron reducing agents. The reaction rate constant of with thiazole determined at pH 8.0 is fe = 2.1 X 10 mole sec in agreement with 2.5 x 10 mole sec" , the value given by the National Bureau of Standards (513). It is considerably higher than that for thiophene (6.5 x 10" mole" sec" ) (513) and pyrrole (6.0 X10 mole sec ) (513). The reaction rate constant of acetone ketyl radical with thiazolium ion determined at pH 0.8 is lc = 6.2=10 mole sec" . Relatively strong transient absorption spectra are observed from these one-electron reactions they show (nm) and e... [Pg.135]

Quaternary ammonium salts compounds of the type R4N" X find application m a technique called phase transfer catalysis A small amount of a quaternary ammonium salt promotes the transfer of an anion from aqueous solution where it is highly solvated to an organic solvent where it is much less solvated and much more reactive... [Pg.956]

It IS not possible to tell by inspection whether the a or p pyranose form of a par ticular carbohydrate predominates at equilibrium As just described the p pyranose form IS the major species present m an aqueous solution of d glucose whereas the a pyranose form predominates m a solution of d mannose (Problem 25 8) The relative abundance of a and p pyranose forms m solution depends on two factors The first is solvation of the anomeric hydroxyl group An equatorial OH is less crowded and better solvated by water than an axial one This effect stabilizes the p pyranose form m aqueous solution The other factor called the anomeric effect, involves an electronic interaction between the nng oxygen and the anomeric substituent and preferentially stabilizes the axial OH of the a pyranose form Because the two effects operate m different directions but are com parable m magnitude m aqueous solution the a pyranose form is more abundant for some carbohydrates and the p pyranose form for others... [Pg.1040]

Solubility can often be decreased by using a nonaqueous solvent. A precipitate s solubility is generally greater in aqueous solutions because of the ability of water molecules to stabilize ions through solvation. The poorer solvating ability of nonaqueous solvents, even those that are polar, leads to a smaller solubility product. For example, PbS04 has a Ks of 1.6 X 10 in H2O, whereas in a 50 50 mixture of H20/ethanol the Ks at 2.6 X 10 is four orders of magnitude smaller. [Pg.237]

Protein molecules extracted from Escherichia coli ribosomes were examined by viscosity, sedimentation, and diffusion experiments for characterization with respect to molecular weight, hydration, and ellipticity. These dataf are examined in this and the following problem. Use Fig. 9.4a to estimate the axial ratio of the molecules, assuming a solvation of 0.26 g water (g protein)"V At 20°C, [r ] = 27.7 cm g" and P2 = 1.36 for aqueous solutions of this polymer. [Pg.655]

Solvent for Displacement Reactions. As the most polar of the common aprotic solvents, DMSO is a favored solvent for displacement reactions because of its high dielectric constant and because anions are less solvated in it (87). Rates for these reactions are sometimes a thousand times faster in DMSO than in alcohols. Suitable nucleophiles include acetyUde ion, alkoxide ion, hydroxide ion, azide ion, carbanions, carboxylate ions, cyanide ion, hahde ions, mercaptide ions, phenoxide ions, nitrite ions, and thiocyanate ions (31). Rates of displacement by amides or amines are also greater in DMSO than in alcohol or aqueous solutions. Dimethyl sulfoxide is used as the reaction solvent in the manufacture of high performance, polyaryl ether polymers by reaction of bis(4,4 -chlorophenyl) sulfone with the disodium salts of dihydroxyphenols, eg, bisphenol A or 4,4 -sulfonylbisphenol (88). These and related reactions are made more economical by efficient recycling of DMSO (89). Nucleophilic displacement of activated aromatic nitro groups with aryloxy anion in DMSO is a versatile and useful reaction for the synthesis of aromatic ethers and polyethers (90). [Pg.112]

Photoelectron spectroscopic studies show that the first ionization potential (lone pair electrons) for cyclic amines falls in the order aziridine (9.85 eV) > azetidine (9.04) > pyrrolidine (8.77) >piperidine (8.64), reflecting a decrease in lone pair 5-character in the series. This correlates well with the relative vapour phase basicities determined by ion cyclotron resonance, but not with basicity in aqueous solution, where azetidine (p/iTa 11.29) appears more basic than pyrrolidine (11.27) or piperidine (11.22). Clearly, solvation effects influence basicity (74JA288). [Pg.239]

In this study we examined the influence of concentration conditions, acidity of solutions, and electrolytes inclusions on the liophilic properties of the surfactant-rich phases of polyethoxylated alkylphenols OP-7 and OP-10 at the cloud point temperature. The liophilic properties of micellar phases formed under different conditions were determined by the estimation of effective hydration values and solvatation free energy of methylene and carboxyl groups at cloud-point extraction of aliphatic acids. It was demonstrated that micellar phases formed from the low concentrated aqueous solutions of the surfactant have more hydrophobic properties than the phases resulting from highly concentrated solutions. The influence of media acidity on the liophilic properties of the surfactant phases was also exposed. [Pg.50]

Stabilization of the syn conformer in the gas phase is explained rather intuitively in terms of the extra stabilization due to increased interactions between the H atom in the OH group and the O atom in C=0 group. As one can see in Figure 5, the extra stabilization in the anti confonner in aqueous solution arises from the solvation energy, especially at the carbonyl oxygen site. [Pg.427]

Procedures to compute acidities are essentially similar to those for the basicities discussed in the previous section. The acidities in the gas phase and in solution can be calculated as the free energy changes AG and AG" upon proton release of the isolated and solvated molecules, respectively. To discuss the relative strengths of acidity in the gas and aqueous solution phases, we only need the magnitude of —AG and — AG" for haloacetic acids relative to those for acetic acids. Thus the free energy calculations for acetic acid, haloacetic acids, and each conjugate base are carried out in the gas phase and in aqueous solution. [Pg.430]

Many organic reactions involve acid concentrations considerably higher than can be accurately measured on the pH scale, which applies to relatively dilute aqueous solutions. It is not difficult to prepare solutions in which the formal proton concentration is 10 M or more, but these formal concentrations are not a suitable measure of the activity of protons in such solutions. For this reason, it has been necessaiy to develop acidity functions to measure the proton-donating strength of concentrated acidic solutions. The activity of the hydrogen ion (solvated proton) can be related to the extent of protonation of a series of bases by the equilibrium expression for the protonation reaction. [Pg.232]

A comparison of phenol acidity in DMSO versus the gas phase also shows an attenuation of substituent effects, but not nearly as much as in water. Whereas the effect of ubstituents on AG for deprotonation in aqueous solution is about one-sixth that in the gas phase, the ratio for DMSO is about one-third. This result points to hydrogen bonding of the phenolate anion by water as the major difference in the solvating properties of water and DMSO. ... [Pg.244]

In the discussion of the relative acidity of carboxylic acids in Chapter 1, the thermodynamic acidity, expressed as the acid dissociation constant, was taken as the measure of acidity. It is straightforward to determine dissociation constants of such adds in aqueous solution by measurement of the titration curve with a pH-sensitive electrode (pH meter). Determination of the acidity of carbon acids is more difficult. Because most are very weak acids, very strong bases are required to cause deprotonation. Water and alcohols are far more acidic than most hydrocarbons and are unsuitable solvents for generation of hydrocarbon anions. Any strong base will deprotonate the solvent rather than the hydrocarbon. For synthetic purposes, aprotic solvents such as ether, tetrahydrofuran (THF), and dimethoxyethane (DME) are used, but for equilibrium measurements solvents that promote dissociation of ion pairs and ion clusters are preferred. Weakly acidic solvents such as DMSO and cyclohexylamine are used in the preparation of strongly basic carbanions. The high polarity and cation-solvating ability of DMSO facilitate dissociation... [Pg.405]

The interaction between a solute species and solvent molecules is called solvation, or hydration in aqueous solution. This phenomenon stabilizes separated charges and makes possible heterolytic reactions in solution. Solvation is, therefore, an important subject in solution chemistry. The solvation of ions has been most thoroughly studied. [Pg.401]


See other pages where Aqueous solutions solvation is mentioned: [Pg.451]    [Pg.282]    [Pg.2839]    [Pg.451]    [Pg.282]    [Pg.2839]    [Pg.207]    [Pg.1740]    [Pg.2784]    [Pg.629]    [Pg.23]    [Pg.43]    [Pg.591]    [Pg.62]    [Pg.80]    [Pg.195]    [Pg.176]    [Pg.459]    [Pg.430]    [Pg.431]    [Pg.436]    [Pg.348]    [Pg.403]    [Pg.506]    [Pg.122]    [Pg.238]    [Pg.424]    [Pg.605]    [Pg.184]    [Pg.56]   
See also in sourсe #XX -- [ Pg.455 , Pg.456 ]




SEARCH



Solutions solvation

© 2024 chempedia.info