Ammonium chloride reaction with ammonia

The acid filtrate is treated with excess of ammonium chloride and with ammonia to precipitate the ferric oxide and any alumina, the precipitate being tested for the latter in the usual way. The filtrate is divided into three parts one is acidified with acetic acid and tested for copper with ferrocyanide in another the manganese (if present) is precipitated with ammonium sulphide, lime and magnesia being then tested for in the third sulphates are tested for with barium chloride. Manganese is best sought in a separate portion of the substance by the well-known dry reaction. 

Characters and Tests.—Heavy colourless masses of prismatic crystals, possessing a highly acrid metallic taste more soluble in alcohol, and still more so in ether, than in water. Heated, it liquefies, and completely sublimes without decomposing. Its aqueous solution gives a yellow precipitate (yellow mercuric oxide) with caustic potash, a white precipitate (mercuric-ammonium chloride, NHgHgCl) with ammonia, and a curdy white precipitate (silver chloride) with silver nitrate the first two reactions are indicative of the salt being a mercuric compound, and the third reaction shows that it is a chloride. 

This carbon dioxide-free solution is usually treated in an external, weU-agitated liming tank called a "prelimer." Then the ammonium chloride reacts with milk of lime and the resultant ammonia gas is vented back to the distiller. Hot calcium chloride solution, containing residual ammonia in the form of ammonium hydroxide, flows back to a lower section of the distiller. Low pressure steam sweeps practically all of the ammonia out of the limed solution. The final solution, known as "distiller waste," contains calcium chloride, unreacted sodium chloride, and excess lime. It is diluted by the condensed steam and the water in which the lime was conveyed to the reaction. Distiller waste also contains inert soHds brought in with the lime. In some plants, calcium chloride [10045-52-4], CaCl, is recovered from part of this solution. Close control of the distillation process is requited in order to thoroughly strip carbon dioxide, avoid waste of lime, and achieve nearly complete ammonia recovery. The hot (56°C) mixture of wet ammonia and carbon dioxide leaving the top of the distiller is cooled to remove water vapor before being sent back to the ammonia absorber. 

Methyl chloride reacts with ammonia alcohoHc solution or ia the vapor phase by the Hofmann reaction to form a mixture of the hydrochlorides of methylamine, dimethylamine, trimethyl amine, and tetramethyl ammonium chloride. With tertiary amines, methyl chloride forms quaternary derivatives. 

The benzylation of a wide variety of aHphatic, aromatic, and heterocycHc amines has been reported. Benzyl chloride is converted into mono-, di-, and tribenzyl amines by reaction with ammonia. Benzylaniline [103-32-2] results from the reaction of benzyl chloride with aniline. Reaction with tertiary amines yields quaternary ammonium salts with trialkylpbospbines, quaternary phosphonium salts and with sulfides, sulfonium salts are formed. 

There were placed 120 g of Lthree-necked flask equipped with a stirrer thermometer and methanol/dry ice cooling and 1.5 liters of liquid ammonia were allowed to enter at -40°C. Then there were added under continuous cooling 50 g (2.17 mols) of sodium metal in portions of 1 to 2 g during the course of one hour. The end of the reaction was recognized by the continuation of the blue color. After the end of the reaction the excess sodium was destroyed by the addition of ammonium chloride and the ammonia vaporized at normal pressure. The residue was taken up in 500 ml of water and concentrated in a vacuum to 200 ml in order to remove residual ammonia, and again treated with 300 ml of water. The entire operations were carried out under a nitrogen atmosphere. 

The solvent-free material, isolated at — 70°C, disproportionates violently (sometimes explosively) at — 50°C to ammonium chloride and nitrogen trichloride [1]. Ethereal solutions of chloramine are readily handled [2], In the preparation of chloramine by reaction of sodium hypochlorite with ammonia, care is necessary to avoid excess chlorine in the preparation of the hypochlorite from sodium hydroxide, because nitrogen trichloride may be formed in the subsequent reaction with ammonia [3]. 

Background Thermochemistry is the study of heat changes and transfers associated with chemical reactions. In this thermochemical laboratory study, you will determine the enthalpy change that occurs when a strong base, sodium hydroxide, reacts with a strong acid, hydrochloric acid. Other mixtures studied will include ammonium chloride mixed with sodium hydroxide and ammonia mixed with hydrochloric acid. These three reactions are represented as ... 

Carbachol Carbachol, 2-carbamoyloxy-iV,iV,iV-trimethylethyl ammonium chloride (13.1.7), is made by reacting 2-chloroethanol with phosgene, which forms 2-chloroethyl chloroformate (13.1.5). Upon reaction with ammonia, it turns into the corresponding amide (13.1.6), which is further reacted with an equimolar quantity of trimethylamine, giving carbachol (13.1.7) [9-13],... 

Betanechol Betanechol, 2-carbamoyloxy-l-(A,A,iV-trimethyl)propyl ammonium chloride (13.1.8), is made by either the subsequent reaction of l-(iV,A,A-trimethylammonium) propan-2-ol with phosgene, followed by ammonia, or by a completely analogous synthesis of carbachol by the reaction of l-chloro-2-propanol with phosgene followed by consequent reactions with ammonia, and then with trimethylamine, giving betanechol (13.1.8) [14,15],... 

The product decomposes on sublimation forming mercury(ll) chloride, ammonia, and nitrogen. However, in the presence of ammonium chloride, the same reaction with ammonia with HgCb in aqueous solution yields fusible white precipitate, (NH3)2HgCl2. Similar product also is obtained by reaction of gaseous ammonia with solid mercury(II) chloride. However, the solid mer-cury(II) chloride is more stable than the above infusible product and can be melted without decomposition. 

One of the first compounds to be introduced to the clinic, aztreonam (40-9), has been produced by total synthesis. Constmction of the chiral azetidone starts with amide formation of L-threonine (40-1) via its acid chloride treatment with ammonia leads to the corresponding amide (40-2). The primary amino group in that product is then protected as its carbobenzyloxy derivative (40-3). Reaction of that product with methanesulfonyl chloride affords the mesylate (40-4). Treatment of that intermediate with the pyridine sulfur trioxide complex leads to the formation of the A -sulfonated amide (40-5). Potassium bicarbonate is sufficiently basic to ionize the very acidic proton on the amide the resulting anion then displaces the adjacent mesylate to form the desired azetidone the product is isolated as its tetrabutyl ammonium salt (40-6). Catalytic hydrogenation over palladium removes the carbobenzyloxy protecting group to afford the free primary amine (40-7). The... 

Kraus and Greer1 originally prepared a few organotin hydrides with considerable difficulty from the reaction between an organotin sodium compound and ammonium bromide or ammonium chloride in liquid ammonia. Their procedure remained the only synthetic route to these compounds for some 25 years until 1947 when Finholt, Bond, Wilzbach, and Schlesinger2 obtained the methyltin hydrides in a more facile manner by reducing a mixture of the methyltin chlorides with lithium aluminum hydride (lithium tetrahydroaluminate). 

SAFETY PROFILE Experimental reproductive effects. Human mutation data reported. Reaction with ammonia or ammonium salts yields fulminating gold, a heat-, friction-, and impact-sensitive explosive similar to mercury and silver fulminates. See also GOLD COMPOUNDS and CHLORIDES. When heated to decomposition it emits toxic fumes of CT. 

Carbon dioxide and the ammonia recovered by treating the ammonium chloride formed with calcium hydroxide are returned to the process cycle. Ammonia is therefore only a reaction-aid. The overall reaction is ... 

Sulfonamides can in general be obtained very smoothly by treating sulfonyl chlorides with ammonia694 or dry, powdered ammonium carbonate.217,695 The reaction with ammonia is carried out in aqueous solution or better in an inert organic solvent in the cold it is advisable to use an excess of ammonia so as to avoid hydrolysis to the ammonium sulfonate or formation of the disulfonylamide, (RSC NH. 

---