Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Alkenes nitrones

S.2.2.5. Isoxazole Derivatives from Nitrones. With alkenes, nitrones cycloadd readily to give saturated isoxazolidines (Scheme 5.31). [Pg.117]

Isoxazolidines sometimes undergo retro 1,3-dipolar cycloaddition to give back alkenes and nitrones (77AHC(2D207). [Pg.80]

The preparation of isoxazolidine derivatives was first reported by Bodforss in 1918 (18CB192). The major synthesis of isoxazolidines involves the cycloaddition of nitrones with alkenes, and isoxazolidines have also enjoyed an increasing use as key intermediates in the synthesis of natural products and other heterocycles (79ACR396, 1892CB1498, 1892CB3291, 1882CB2105). [Pg.3]

Nitrones or aci-nitro esters react with alkenes to give in some cases A/-substituted isoxazolidines and in others 2-isoxazolines. When the intermediate isoxazolidines were observed, a number of procedures transformed them into the 2-isoxazolines. Acrylonitrile and phenyl rzcf-nitrone esters produced an A/-methoxyisoxazolidine. Treatment with acid generated a 2-isoxazole while treatment with base generated an oxazine (Scheme 118) (68ZOR236). When an ethoxycarbonyl nitrone ester was reacted with alkenes, no intermediate isoxazolidine was observed, only A -isoxazolines. Other aci-mtro methyl esters used are shown in Scheme 118 and these generate IV-methoxyisoxazolidines or A -isoxazolines which can be further transformed (72MI41605). [Pg.95]

Chiral nitrones react with alkenes to produce 3,5-disubstituted isoxazolidines that are nonracemic diastereomeric mixtures and are oriented predominantly cis (equation 53) (77CC303, 79JOC1212). [Pg.109]

A newer method for the preparation of nitronic esters, namely utilizing the (9-trimethyl-silyl ester, has been reported and these are prepared by the reaction of alkylnitro compounds and (V,(V-bis(trimethylsilyl)acetamide. These nitronic esters also undergo cycloaddition with alkenes to produce isoxazolidines (equation 54) (74MIP41601, 74DOK109, 78ACS(B)ll8). [Pg.110]

Steroidal alkene (531a) reacted with a nitronic ester at 14 000 atmospheres to produce an isoxazolidine (532a) (80IZV1893). [Pg.110]

Nitrone hydrate is converted into nitrone by boiling in benzene with azeotropic removal of water [48] (equation 50). This in situ formation of nitrone is carried out in the presence of various alkenes and alkynes, which undergo cycloaddition with the nitrone [48, 49] (equations 51 and 52). [Pg.814]

Asymmetric cycloaddition of functionalized alkenes to nitrile oxides and nitrones 98YGK11. [Pg.252]

Reaction of 2-chloromethyl-4//-pyrido[l,2-u]pyrimidine-4-one 162 with various nitronate anions (4 equiv) under phase-transfer conditions with BU4NOH in H2O and CH2CI2 under photo-stimulation gave 2-ethylenic derivatives 164 (01H(55)535). These alkenes 164 were formed by single electron transfer C-alkylation and base-promoted HNO2 elimination from 163. When the ethylenic derivative 164 (R = R ) was unsymmetrical, only the E isomer was isolated. Compound 162 was treated with S-nucleophiles (sodium salt of benzyl mercaptan and benzenesulfinic acid) and the lithium salt of 4-hydroxycoumarin to give compounds 165-167, respectively. [Pg.210]

In the 1,3-dipolar cycloaddition reactions of especially allyl anion type 1,3-dipoles with alkenes the formation of diastereomers has to be considered. In reactions of nitrones with a terminal alkene the nitrone can approach the alkene in an endo or an exo fashion giving rise to two different diastereomers. The nomenclature endo and exo is well known from the Diels-Alder reaction [3]. The endo isomer arises from the reaction in which the nitrogen atom of the dipole points in the same direction as the substituent of the alkene as outlined in Scheme 6.7. However, compared with the Diels-Alder reaction in which the endo transition state is stabilized by secondary 7t-orbital interactions, the actual interaction of the N-nitrone p -orbital with a vicinal p -orbital on the alkene, and thus the stabilization, is small [25]. The endojexo selectivity in the 1,3-dipolar cycloaddition reaction is therefore primarily controlled by the structure of the substrates or by a catalyst. [Pg.217]

Scheeren et al. reported the first enantioselective metal-catalyzed 1,3-dipolar cycloaddition reaction of nitrones with alkenes in 1994 [26]. Their approach involved C,N-diphenylnitrone la and ketene acetals 2, in the presence of the amino acid-derived oxazaborolidinones 3 as the catalyst (Scheme 6.8). This type of boron catalyst has been used successfully for asymmetric Diels-Alder reactions [27, 28]. In this reaction the nitrone is activated, according to the inverse electron-demand, for a 1,3-dipolar cycloaddition with the electron-rich alkene. The reaction is thus controlled by the LUMO inone-HOMOaikene interaction. They found that coordination of the nitrone to the boron Lewis acid strongly accelerated the 1,3-dipolar cycloaddition reaction with ketene acetals. The reactions of la with 2a,b, catalyzed by 20 mol% of oxazaborolidinones such as 3a,b were carried out at -78 °C. In some reactions fair enantioselectivities were induced by the catalysts, thus, 4a was obtained with an optical purity of 74% ee, however, in a low yield. The reaction involving 2b gave the C-3, C-4-cis isomer 4b as the only diastereomer of the product with 62% ee. [Pg.218]

As for boron catalysts, the aluminum catalysts have exclusively been applied for the inverse electron-demand 1,3-dipolar cycloaddition between alkenes and nitrones. The first contribution to this field was published by j0rgensen et al. in... [Pg.219]

Several titanium(IV) complexes are efficient and reliable Lewis acid catalysts and they have been applied to numerous reactions, especially in combination with the so-called TADDOL (a, a,a, a -tetraaryl-l,3-dioxolane-4,5-dimethanol) (22) ligands [53-55]. In the first study on normal electron-demand 1,3-dipolar cycloaddition reactions between nitrones and alkenes, which appeared in 1994, the catalytic reaction of a series of chiral TiCl2-TADDOLates on the reaction of nitrones 1 with al-kenoyloxazolidinones 19 was developed (Scheme 6.18) [56]. These substrates have turned out be the model system of choice for most studies on metal-catalyzed normal electron-demand 1,3-dipolar cycloaddition reactions of nitrones as it will appear from this chapter. When 10 mol% of the catalyst 23a was applied in the reaction depicted in Scheme 6.18 the reaction proceeded to give a yield of up to 94% ee after 20 h. The reaction led primarily to exo-21 and in the best case an endo/ exo ratio of 10 90 was obtained. The chiral information of the catalyst was transferred with a fair efficiency to the substrates as up to 60% ee of one of the isomers of exo3 was obtained [56]. [Pg.226]

On the basis of this successful application of 23d, this catalyst was applied in a series of reactions (Scheme 6.22). For all eight reactions of nitrones 1 and alkenes 19 in which 23d was applied as the catalyst, diastereoselectivities >90% de were observed, and most remarkably >90% ee is obtained for all reactions involving a nitrone with an aromatic substituent whereas reactions with N-benzyl and N-alkyl nitrones led to lower enantioselectivities [65]. [Pg.228]

The TiX2-TADD0Late-catalyzed 1,3-dipolar q cloaddition reactions were extended to include an acrylate derivative [66]. In the absence of a catalyst, the reaction between nitrones 1 and acryloyl oxazolidinone 19b proceeded to give a mixture all eight regio-and stereoisomers (Scheme 6.23). However, application of in this case only 10 mol% of Ti(OTs)2-TADDOLate 23d as catalyst for the reaction of various nitrones 1 with alkene 19b, led to complete regioselectivity and high endo selectivity in the reaction and the endo products 21 were obtained with 48-70% ee (Scheme 6.23) [66]. [Pg.229]

The normal electron-demand principle of activation of 1,3-dipolar cycloaddition reactions of nitrones has also been tested for the 1,3-dipolar cycloaddition reaction of alkenes with diazoalkanes [71]. The reaction of ethyl diazoacetate 33 with 19b in the presence of a TiCl2-TADDOLate catalyst 23a afforded the 1,3-dipolar cycloaddition product 34 in good yield and with 30-40% ee (Scheme 6.26). [Pg.231]

The enantioselective inverse electron-demand 1,3-dipolar cycloaddition reactions of nitrones with alkenes described so far were catalyzed by metal complexes that favor a monodentate coordination of the nitrone, such as boron and aluminum complexes. However, the glyoxylate-derived nitrone 36 favors a bidentate coordination to the catalyst. This nitrone is a very interesting substrate, since the products that are obtained from the reaction with alkenes are masked a-amino acids. One of the characteristics of nitrones such as 36, having an ester moiety in the a position, is the swift E/Z equilibrium at room temperature (Scheme 6.28). In the crystalline form nitrone 36 exists as the pure Z isomer, however, in solution nitrone 36 have been shown to exists as a mixture of the E and Z isomers. This equilibrium could however be shifted to the Z isomer in the presence of a Lewis acid [74]. [Pg.233]

The reactions of nitrones constitute the absolute majority of metal-catalyzed asymmetric 1,3-dipolar cycloaddition reactions. Boron, aluminum, titanium, copper and palladium catalysts have been tested for the inverse electron-demand 1,3-dipolar cycloaddition reaction of nitrones with electron-rich alkenes. Fair enantioselectivities of up to 79% ee were obtained with oxazaborolidinone catalysts. However, the AlMe-3,3 -Ar-BINOL complexes proved to be superior for reactions of both acyclic and cyclic nitrones and more than >99% ee was obtained in some reactions. The Cu(OTf)2-BOX catalyst was efficient for reactions of the glyoxylate-derived nitrones with vinyl ethers and enantioselectivities of up to 93% ee were obtained. [Pg.244]

Dipolar cydoadditions are one of the most useful synthetic methods to make stereochemically defined five-membered heterocydes. Although a variety of dia-stereoselective 1,3-dipolar cydoadditions have been well developed, enantioselec-tive versions are still limited [29]. Nitrones are important 1,3-dipoles that have been the target of catalyzed enantioselective reactions [66]. Three different approaches to catalyzed enantioselective reactions have been taken (1) activation of electron-defident alkenes by a chiral Lewis acid [23-26, 32-34, 67], (2) activation of nitrones in the reaction with ketene acetals [30, 31], and (3) coordination of both nitrones and allylic alcohols on a chiral catalyst [20]. Among these approaches, the dipole/HOMO-controlled reactions of electron-deficient alkenes are especially promising because a variety of combinations between chiral Lewis acids and electron-deficient alkenes have been well investigated in the study of catalyzed enantioselective Diels-Alder reactions. Enantioselectivities in catalyzed nitrone cydoadditions sometimes exceed 90% ee, but the efficiency of catalytic loading remains insufficient. [Pg.268]

Nitronates derived from primary nitroalkanes can be regarded as a synthetic equivalent of nitrile oxides since the elimination of an alcohol molecule from nitronates adds one higher oxidation level leading to nitrile oxides. This direct / -elimination of nitronates is known to be facilitated in the presence of a Lewis acid or a base catalyst [66, 72, 73]. On the other hand, cycloaddition reactions of nitronates to alkene dipolarophiles produce N-alkoxy-substituted isoxazolidines as cycloadducts. Under acid-catalyzed conditions, these isoxazolidines can be transformed into 2-isoxazolines through a ready / -elimination, and 2-isoxazolines correspond to the cycloadducts of nitrile oxide cycloadditions to alkenes [74]. [Pg.272]

Accordingly, cyclic nitronates can be a useful synthetic equivalent of functionalized nitrile oxides, while reaction examples are quite limited. Thus, 2-isoxazoline N-oxide and 5,6-dihydro-4H-l,2-oxazine N-oxide, as five- and six-membered cyclic nitronates, were generated in-situ by dehydroiodination of 3-iodo-l-nitropropane and 4-iodo-l-nitrobutane with triethylamine and trapped with monosubstituted alkenes to give 5-substituted 3-(2-hydroxyethyl)isoxazolines and 2-phenylperhydro-l,2-oxazino[2,3-fe]isoxazole, respectively (Scheme 7.26) [72b]. Upon treatment with a catalytic amount of trifluoroacetic acid, the perhydro-l,2-oxazino[2,3-fe]isoxazole was quantitatively converted into the corresponding 2-isoxazoline. Since a method for catalyzed enantioselective nitrone cycloadditions was established and cyclic nitronates should behave like cyclic nitrones in reactivity, there would be a good chance to attain catalyzed enantioselective formation of 2-isoxazolines via nitronate cycloadditions. [Pg.272]

The parent five-membered nitronate having no substituent at the 3-position was too unstable to be isolated. However, 3-substituted derivatives were highly stabilized. Especially, the 3-ethyl derivatives having a terminal electron-withdrawing substituent are readily available by the dehydrochlorination of 3-chloro-l-nitropropane in the presence of electron-deficient alkenes. It was our delight that the reaction of 3-al-kyl-substituted five-membered nitronates was also successfully catalyzed by R,R-DBFOX/Ph-Ni(SbFg)2 complex to at room temperature. This reaction was highly endo-selective (cisjtrans= 91 9) and enantioselective for the endo cycloadduct (92% ee). [Pg.273]

Nitrones are a rather polarized 1,3-dipoles so that the transition structure of their cydoaddition reactions to alkenes activated by an electron-withdrawing substituent would involve some asynchronous nature with respect to the newly forming bonds, especially so in the Lewis acid-catalyzed reactions. Therefore, the transition structures for the catalyzed nitrone cydoaddition reactions were estimated on the basis of ab-initio calculations using the 3-21G basis set. A model reaction indudes the interaction between CH2=NH(0) and acrolein in the presence or absence of BH3 as an acid catalyst (Scheme 7.30). Both the catalyzed and uncatalyzed reactions have only one transition state in each case, indicating that the reactions are both concerted. However, the synchronous nature between the newly forming 01-C5 and C3-C4 bonds in the transition structure TS-J of the catalyzed reaction is rather different from that in the uncatalyzed reaction TS-K. For example, the bond lengths and bond orders in the uncatalyzed reaction are 1.93 A and 0.37 for the 01-C5 bond and 2.47 A and 0.19 for the C3-C4 bond, while those in... [Pg.276]

The 1,3-dipolar cycloaddition reaction of nitrones with alkenes gives isoxazolidines is a fundamental reaction in organic chemistry and the available literature on this topic of organic chemistry is vast. In this reaction until three contiguous asymmetric centers can be formed in the isoxazolidine 17 as outlined for the reaction between a nitrone and an 1,2-disubstituted alkene. The relative stereochemistry at C-4 and C-5 is always controlled by the geometric relationship of the substituents on the alkene (Scheme 8.6). [Pg.321]


See other pages where Alkenes nitrones is mentioned: [Pg.366]    [Pg.865]    [Pg.711]    [Pg.711]    [Pg.366]    [Pg.865]    [Pg.711]    [Pg.711]    [Pg.108]    [Pg.108]    [Pg.109]    [Pg.110]    [Pg.110]    [Pg.111]    [Pg.77]    [Pg.212]    [Pg.213]    [Pg.214]    [Pg.214]    [Pg.215]    [Pg.215]    [Pg.216]    [Pg.227]    [Pg.228]    [Pg.230]    [Pg.244]    [Pg.248]    [Pg.249]   
See also in sourсe #XX -- [ Pg.364 ]

See also in sourсe #XX -- [ Pg.364 ]

See also in sourсe #XX -- [ Pg.305 ]




SEARCH



Alkenes alkyl nitronate intermolecular cycloadditions

Alkenes catalytic asymmetric nitrone reactions

Alkenes cyclic nitronate preparation

Alkenes intermolecular nitrone cycloaddition reactions

Alkenes intramolecular nitrone-alkene cycloadditions

Alkenes nitrone 1,3-dipolar cycloadditions

Alkenes pyrrolidine nitrones

Alkenes reactions with nitrones

By cycloaddition of nitrones and alkenes

Isoxazolidines nitrone-alkene

Nitrone-alkene cycloaddition

Nitrones nitrone-alkene

Nitrones nitrone-alkene

© 2024 chempedia.info