Alkenes nitrone 1,3-dipolar cycloadditions

Isoxazolidines sometimes undergo retro 1,3-dipolar cycloaddition to give back alkenes and nitrones (77AHC(2D207). 

In the 1,3-dipolar cycloaddition reactions of especially allyl anion type 1,3-dipoles with alkenes the formation of diastereomers has to be considered. In reactions of nitrones with a terminal alkene the nitrone can approach the alkene in an endo or an exo fashion giving rise to two different diastereomers. The nomenclature endo and exo is well known from the Diels-Alder reaction [3]. The endo isomer arises from the reaction in which the nitrogen atom of the dipole points in the same direction as the substituent of the alkene as outlined in Scheme 6.7. However, compared with the Diels-Alder reaction in which the endo transition state is stabilized by secondary 7t-orbital interactions, the actual interaction of the N-nitrone p -orbital with a vicinal p -orbital on the alkene, and thus the stabilization, is small [25]. The endojexo selectivity in the 1,3-dipolar cycloaddition reaction is therefore primarily controlled by the structure of the substrates or by a catalyst. 

Scheeren et al. reported the first enantioselective metal-catalyzed 1,3-dipolar cycloaddition reaction of nitrones with alkenes in 1994 [26]. Their approach involved C,N-diphenylnitrone la and ketene acetals 2, in the presence of the amino acid-derived oxazaborolidinones 3 as the catalyst (Scheme 6.8). This type of boron catalyst has been used successfully for asymmetric Diels-Alder reactions [27, 28]. In this reaction the nitrone is activated, according to the inverse electron-demand, for a 1,3-dipolar cycloaddition with the electron-rich alkene. The reaction is thus controlled by the LUMO inone-HOMOaikene interaction. They found that coordination of the nitrone to the boron Lewis acid strongly accelerated the 1,3-dipolar cycloaddition reaction with ketene acetals. The reactions of la with 2a,b, catalyzed by 20 mol% of oxazaborolidinones such as 3a,b were carried out at -78 °C. In some reactions fair enantioselectivities were induced by the catalysts, thus, 4a was obtained with an optical purity of 74% ee, however, in a low yield. The reaction involving 2b gave the C-3, C-4-cis isomer 4b as the only diastereomer of the product with 62% ee. 

As for boron catalysts, the aluminum catalysts have exclusively been applied for the inverse electron-demand 1,3-dipolar cycloaddition between alkenes and nitrones. The first contribution to this field was published by j0rgensen et al. in... 

Several titanium(IV) complexes are efficient and reliable Lewis acid catalysts and they have been applied to numerous reactions, especially in combination with the so-called TADDOL (a, a,a, a -tetraaryl-l,3-dioxolane-4,5-dimethanol) (22) ligands [53-55]. In the first study on normal electron-demand 1,3-dipolar cycloaddition reactions between nitrones and alkenes, which appeared in 1994, the catalytic reaction of a series of chiral TiCl2-TADDOLates on the reaction of nitrones 1 with al-kenoyloxazolidinones 19 was developed (Scheme 6.18) [56]. These substrates have turned out be the model system of choice for most studies on metal-catalyzed normal electron-demand 1,3-dipolar cycloaddition reactions of nitrones as it will appear from this chapter. When 10 mol% of the catalyst 23a was applied in the reaction depicted in Scheme 6.18 the reaction proceeded to give a yield of up to 94% ee after 20 h. The reaction led primarily to exo-21 and in the best case an endo/ exo ratio of 10 90 was obtained. The chiral information of the catalyst was transferred with a fair efficiency to the substrates as up to 60% ee of one of the isomers of exo3 was obtained [56]. 

The normal electron-demand principle of activation of 1,3-dipolar cycloaddition reactions of nitrones has also been tested for the 1,3-dipolar cycloaddition reaction of alkenes with diazoalkanes [71]. The reaction of ethyl diazoacetate 33 with 19b in the presence of a TiCl2-TADDOLate catalyst 23a afforded the 1,3-dipolar cycloaddition product 34 in good yield and with 30-40% ee (Scheme 6.26). 

The enantioselective inverse electron-demand 1,3-dipolar cycloaddition reactions of nitrones with alkenes described so far were catalyzed by metal complexes that favor a monodentate coordination of the nitrone, such as boron and aluminum complexes. However, the glyoxylate-derived nitrone 36 favors a bidentate coordination to the catalyst. This nitrone is a very interesting substrate, since the products that are obtained from the reaction with alkenes are masked a-amino acids. One of the characteristics of nitrones such as 36, having an ester moiety in the a position, is the swift E/Z equilibrium at room temperature (Scheme 6.28). In the crystalline form nitrone 36 exists as the pure Z isomer, however, in solution nitrone 36 have been shown to exists as a mixture of the E and Z isomers. This equilibrium could however be shifted to the Z isomer in the presence of a Lewis acid [74]. 

The reactions of nitrones constitute the absolute majority of metal-catalyzed asymmetric 1,3-dipolar cycloaddition reactions. Boron, aluminum, titanium, copper and palladium catalysts have been tested for the inverse electron-demand 1,3-dipolar cycloaddition reaction of nitrones with electron-rich alkenes. Fair enantioselectivities of up to 79% ee were obtained with oxazaborolidinone catalysts. However, the AlMe-3,3 -Ar-BINOL complexes proved to be superior for reactions of both acyclic and cyclic nitrones and more than >99% ee was obtained in some reactions. The Cu(OTf)2-BOX catalyst was efficient for reactions of the glyoxylate-derived nitrones with vinyl ethers and enantioselectivities of up to 93% ee were obtained. 

The 1,3-dipolar cycloaddition reaction of nitrones with alkenes gives isoxazolidines is a fundamental reaction in organic chemistry and the available literature on this topic of organic chemistry is vast. In this reaction until three contiguous asymmetric centers can be formed in the isoxazolidine 17 as outlined for the reaction between a nitrone and an 1,2-disubstituted alkene. The relative stereochemistry at C-4 and C-5 is always controlled by the geometric relationship of the substituents on the alkene (Scheme 8.6). 

The other catalytic approach to the 1,3-dipolar cycloaddition reaction is the inverse electron-demand (Fig. 8.17, right), in which the nitrone is coordinated to the Lewis acid, which for the reaction in Scheme 8.7 was found to be deactivated compared to the uncatalyzed reaction. In order for a 1,3-dipolar cycloaddition to proceed under these restrictions the alkene should be substituted with electron-donating substituents. 

The theoretical investigations of Lewis acid-catalyzed 1,3-dipolar cycloaddition reactions are also very limited and only papers dealing with cycloaddition reactions of nitrones with alkenes have been investigated. The Influence of the Lewis acid catalyst on these reactions are very similar to what has been calculated for the carbo- and hetero-Diels-Alder reactions. The FMOs are perturbed by the coordination of the substrate to the Lewis acid giving a more favorable reaction with a lower transition-state energy. Furthermore, a more asynchronous transition-structure for the cycloaddition step, compared to the uncatalyzed reaction, has also been found for this class of reactions. 

Treatment of 2- 5//-dibenz[i>,/]azepin-5-yl acetaldehyde (16), prepared in 68% yield by /V-alkylation of 5/7-dibenz[A,/]azepine with bromoacetaldehyde diethyl acetal followed by acid hydrolysis, with methyl hydroxylamine yields the isolable nitrone 17, which in refluxing toluene undergoes intramolecular 1,3-dipolar cycloaddition at the CIO —Cl 1 alkene bond to give 2,3,3a, 12b-tetrahydro-2-methyl-3,8-methano-8//-dibenz[i>,/]isoxazolo[4,5-r/]azepine (18).235... 

One-pot tandem sequences involving 1,4-addition and ISOC as the key steps have been developed for the construction of N and 0 heterocycles as well as of carbocycles [44]. In this sequence, the nitronate arising from 1,4-addition to an a, -unsaturated nitro alkene is trapped kinetically using trimethyl silyl chloride (TMSCl). The resulting silyl nitronate underwent a facile intramolecular 1,3-dipolar cycloaddition with the unsaturated tether (e.g.. Schemes 20-22). 

The mechanism of 1,3-dipolar cycloaddition can be found in Ref. 63 and the references within. The reaction of nitrone with 1,2-disubstituted alkenes creates three contiguous asymmetric centers, in which the geometric relationship of the substituents of alkenes is retained. The synthetic utility of nitrone adducts is mainly due to their conversion into various important compounds. For instance, P-amino alcohols can be obtained from isoxazolidines by reduction with H2-Pd or Raney Ni with retention of configuration at the chiral center (Eq. 8.44). 

Asymmetric 1,3-dipolar cycloaddition of cyclic nitrones to crotonic acid derivatives bearing chiral auxiliaries in the presence of zinc iodide gives bicyclic isoxazolidines with high stereoselectivity (Eq. 8.51). The products are good precursors of (3-amino acids such as (+)sedridine.73 Many papers concerning 1,3-dipolar cycloaddition of nitrones to chiral alkenes have been reported, and they are well documented (see Ref. 63). 

The typical 1,3-dipolar cycloaddition reaction of nitrones with alkenes involves a dominant interaction of HOMO (nitrone) and LUMO (alkenes). The inverse-electron demand of the... 

Copper(II)-bisoxazoline also catalyzes asymmetric 1,3-dipolar cycloaddition reactions of nitrones with electron-rich alkenes (Eq. 8.57).90... 

Catalytic enantioselective 1,3-dipolar cycloaddition between nitrones with alkenes using a novel heterochiral ytterbium(III) catalyst is reported (Eq. 8.58).91 The desired isoxazolidine derivatives are obtained in excellent yields with excellent diastereo- and enantioselectivities. 

Alkyl and silyl nitronates are, in principle, /V-alkoxy and /V-silyloxynitrones, and they can react with alkenes in 1,3-dipolar cycloadditions to form /V-alkoxy- or /V-silyloxyisoxaz.olidine (see Scheme 8.25). The alkoxy and silyloxy groups can be eliminated from the adduct on heating or by acid treatment to form 2-isoxazolines. It should be noticed that isoxazolines are also obtained by the reaction of nitrile oxides with alkenes thus, nitronates can be considered as synthetic equivalents of nitrile oxides. Since the pioneering work by Torssell et al. on the development of silyl nitronates, this type of reaction has become a useful synthetic tool. Recent development for generation of cyclic nitronates by hetero Diels-Alder reactions of nitroalkenes is discussed in Section 8.3. 

Asymmetric 1,3-dipolar cycloaddition of nitronates using chiral alkenes has been reported,... 

Related to the nitrile oxide cycloadditions presented in Scheme 6.206 are 1,3-dipolar cycloaddition reactions of nitrones with alkenes leading to isoxazolidines. The group of Comes-Franchini has described cycloadditions of (Z)-a-phenyl-N-methylnitrone with allylic fluorides leading to enantiopure fluorine-containing isoxazolidines, and ultimately to amino polyols (Scheme 6.207) [374]. The reactions were carried out under solvent-free conditions in the presence of 5 mol% of either scandium(III) or indium(III) triflate. In the racemic series, an optimized 74% yield of an exo/endo mixture of cycloadducts was obtained within 15 min at 100 °C. In the case of the enantiopure allyl fluoride, a similar product distribution was achieved after 25 min at 100 °C. Reduction of the isoxazolidine cycloadducts with lithium aluminum hydride provided fluorinated enantiopure polyols of pharmaceutical interest possessing four stereocenters. 

Dipolarophiles D3. 1,3-Dipolar cycloadditions of suitably functionalized cyclic nitrones with terminal alkenes, which have potential leaving groups X at the end of the alkane chain -(CHo),- (D3), were successfully used for the synthesis of pyrrolozidine, indolizidine and quinolizidine alkaloids, such as (+ )-and (—)-lentiginosine, a potent amyloglucosidase inhibitor (Scheme 2.243) (742). Reductive cleavage of the N-0 bond in the cycloadduct is important for the subsequent cyclization to pyrrolozidines, indolizidines, and quinolizidines. 

Dipolarophiles D5. Electron-deficient alkenes based on acrolein and its analogs are widely used as dipolarophiles. To carry out asymmetrical 1,3-dipolar cycloadditions between various nitrones and acrolein, the bis-titanium catalyst (543) (Fig. 2.37) was used as the chiral Lewis acid (Table 2.22) (754a). 

The 1,3-dipolar cycloaddition of nitrones to vinyl ethers is accelerated by Ti(IV) species. The efficiency of the catalyst depends on its complexation capacity. The use of Ti( PrO)2Cl2 favors the formation of trans cycloadducts, presumably, via an endo bidentate complex, in which the metal atom is simultaneously coordinated to the vinyl ether and to the cyclic nitrone or to the Z-isomer of the acyclic nitrones (800a). Highly diastereo- and enantioselective 1,3-dipolar cycloaddition reactions of nitrones with alkenes, catalyzed by chiral polybi-naphtyl Lewis acids, have been developed. Isoxazolidines with up to 99% ee were obtained. The chiral polymer ligand influences the stereoselectivity to the same extent as its monomeric version, but has the advantage of easy recovery and reuse (800b). 

Cycloaddition of 3-methylenephthalide with ot./V-diphenylnitrone gave two diastereoisomers of 2,3-diphenyl-2,3-dihydrospiro 1,3-oxazole-5(47/ )l (3 H)-2-benzoluran]-3 -one (805). The 1,3-dipolar cycloaddition reaction of /V-benzyl-C-(2-furyl)nitrones with electron-rich alkenes gave preferentially trans-3,5-disubstituted isoxazolidines (endo approach). These experimental results are in good qualitative agreement with those predicted from semiempirical (AMI and PM3) and ab initio (HF/3-21G) calculations (806). 

In the frequency of their use in 1,3-dipolar cycloadditions to nitrones, alkynes constitute the second group of dipolarophiles after alkenes. They are of particular interest due to the fact that isoxazolines, the products of initial cycloadditions,... 

Attempts to Catalyze [3 + 2]-Cycloaddition of Nitronates to Olefins In Section 3.2.1.2.2.2, it was noted that [4+ 2]-cycloaddition reactions of nitro-alkenes and alkenes proceed much faster in the presence of LA. At the same time, in the presence of LA, nitronates can rapidly decompose (49) or undergo rearrangements (see Section 3.4.2.5.6 ). Hence, it is not surprising that catalysis of 1,3-dipolar cycloaddition reactions of nitronates with alkenes by LA has attracted little attention until very recent times. An exception is the study by the Japanese... 

Dipolar addition is closely related to the Diels-Alder reaction, but allows the formation of five-membered adducts, including cyclopentane derivatives. Like Diels-Alder reactions, 1,3-dipolar cycloaddition involves [4+2] concerted reaction of a 1,3-dipolar species (the An component and a dipolar In component). Very often, condensation of chiral acrylates with nitrile oxides or nitrones gives only modest diastereoselectivity.82 1,3-Dipolar cycloaddition between nitrones and alkenes is most useful and convenient for the preparation of iso-xazolidine derivatives, which can then be readily converted to 1,3-amino alcohol equivalents under mild conditions.83 The low selectivity of the 1,3-dipolar reaction can be overcome to some extent by introducing a chiral auxiliary to the substrate. As shown in Scheme 5-51, the reaction of 169 with acryloyl chloride connects the chiral sultam to the acrylic acid substrate, and subsequent cycloaddition yields product 170 with a diastereoselectivity of 90 10.84... 

A diastereoselective dipolar cycloaddition of chiral nitrone 80 with alkene dipolarophiles afforded imidazo[ 1,2-3]-isoaxazole (Scheme 9). The conversion via N-O reduction of this ring system with Raney-Ni in methanol gave the corresponding pyrrolo[l,2-A imidazole in 66% yield. The structure has been confirmed by X-ray diffraction crystal stmcture analysis <2000SL967>. 

---