Alkene, monosubstituted

Monosubstituted alkenes (RCH=CH2) have a more stabilized double bond than ethylene (unsubstituted) but are less stable than disubsti tuted alkenes... 

Hydration of alkenes by this method however is limited to monosubstituted alkenes and disubstituted alkenes of the type RCH=CHR Disubstituted alkenes of the type R2C=CH2 along with trisubstituted and tetrasubstituted alkenes do not form alkyl hydrogen sulfates under these conditions but instead react m a more complicated way with concentrated sulfuric acid (to be discussed m Section 6 21)... 

Monomer (Section 6 21) The simplest stable molecule from which a particular polymer may be prepared Monosaccharide (Section 25 1) A carbohydrate that cannot be hydrolyzed further to yield a simpler carbohydrate Monosubstituted alkene (Section 5 6) An alkene of the type RCH=CH2 in which there is only one carbon directly bonded to the carbons of the double bond Multiplicity (Section 13 7) The number of peaks into which a signal IS split in nuclear magnetic resonance spectroscopy Signals are described as singlets doublets triplets and so on according to the number of peaks into which they are split... 

Dibromoborane—dimethyl sulfide is a more convenient reagent. It reacts directly with alkenes and alkynes to give the corresponding alkyl- and alkenyldibromoboranes (120—123). Dibromoborane differentiates between alkenes and alkynes hydroborating internal alkynes preferentially to terminal double and triple bonds (123). Unlike other substituted boranes it is more reactive toward 1,1-disubstituted than monosubstituted alkenes (124). 

Vinyllithium [917-57-7] can be formed direcdy from vinyl chloride by means of a lithium [7439-93-2] dispersion containing 2 wt % sodium [7440-23-5] at 0—10°C. This compound is a reactive intermediate for the formation of vinyl alcohols from aldehydes, vinyl ketones from organic acids, vinyl sulfides from disulfides, and monosubstituted alkenes from organic halides. It can also be converted to vinylcopper [37616-22-1] or divinylcopper lithium [22903-99-7], which can then be used to introduce a vinyl group stereoselectively into a variety of a, P-unsaturated systems (26), or simply add a vinyl group to other a, P-unsaturated compounds to give y, 5-unsaturated compounds. Vinyllithium reagents can also be converted to secondary alcohols with trialkylb o r ane s. 

The observed stereoehemistry of [2jc -I- 2jc] eyeloadditions is in accord with the stereochemieal predietions that ean be made on the basis of this model. For example, E-and Z-2-butene give stereoisomerie products with ethoxyketene. For monosubstituted alkenes, the substituent is vieinal and cis to the ethoxy group in the eyelobutanone product. This is exactly the stereoehemistry predicted by the model in Fig. 11.16, sinee it maximizes the separation of the alkyl and ethoxy substituents in the transition state. 

Monosubstituted alkene (Section 5.6) An alkene of the type RCH=CH2, in which there is only one carbon directly bonded to the carbons of the double bond. 

Accordingly, cyclic nitronates can be a useful synthetic equivalent of functionalized nitrile oxides, while reaction examples are quite limited. Thus, 2-isoxazoline N-oxide and 5,6-dihydro-4H-l,2-oxazine N-oxide, as five- and six-membered cyclic nitronates, were generated in-situ by dehydroiodination of 3-iodo-l-nitropropane and 4-iodo-l-nitrobutane with triethylamine and trapped with monosubstituted alkenes to give 5-substituted 3-(2-hydroxyethyl)isoxazolines and 2-phenylperhydro-l,2-oxazino[2,3-fe]isoxazole, respectively (Scheme 7.26) [72b]. Upon treatment with a catalytic amount of trifluoroacetic acid, the perhydro-l,2-oxazino[2,3-fe]isoxazole was quantitatively converted into the corresponding 2-isoxazoline. Since a method for catalyzed enantioselective nitrone cycloadditions was established and cyclic nitronates should behave like cyclic nitrones in reactivity, there would be a good chance to attain catalyzed enantioselective formation of 2-isoxazolines via nitronate cycloadditions. 

The heat of hydrogenation for allene (Problem 6.37) to yield propane is -295 kj/mol, and the heat of hydrogenation for a typical monosubstituted alkene such as pcopene is - 126 kj/mol. Is allene more stable or less stable than you might expect for a diene Explain. 

Iodine azide, 1N3, adds to alkenes by an electrophilic mechanism similar to that of bromine. If a monosubstituted alkene such as 1-butene is used, only one product results ... 

Monosubstituted and disubstjtuted alkenes have characteristic =C—H out-ofplane bending absorptions in the 700 to 1000 cm-1 range( thereby allowing the substitution pattern on a double bond to be determined. Monosubstituted alkenes such as 1-hexene show strong characteristic bands at 910 and 990 cm-1, and 2,2-disubstituted alkenes (R2C=CH2) have an intense band at 890 cm-1. 

Because a monosubstituted alkene has a AT/Ohyc rog of approximately -126 kj/mol, we might expect that a compound with two monosubstituted double bonds would have a Af/0hyjrog approximately twice that value, or -252 kj/mol. Nonconjugated dienes, such as 1,4-pentadiene (AH°hydrog = —253 kj/mol), meet this expectation, but the conjugated diene 1,3-butadiene (AT/°hydr0g = -236 kj/mol) does not. 1,3-Butadiene is approximately 16 kj/mol (3.8 kcal/mol) more stable than expected. 

An aldehyde or ketone reacts with a phosphorus ylide to yield an alkene in which the oxygen atom of the carbonyl reactant is replaced by the =0 2 of the ylide. Preparation of the phosphorus ylide itself usually involves reaction of a primary alkyl halide with triphenylphosphine, so the ylide is typically primary, RCH = P Ph)3-This means that the disubstituted alkene carbon in the product comes from the carbonyl reactant, while the monosubstituted alkene carbon comes from the ylicle. 

Table 6 Reaction of alkoxycarbenes with monosubstituted alkenes...

The syntheses and spectroscopic and electrochemical characterization of the rhodium and iridium porphyrin complexes (Por)IVI(R) and (Por)M(R)(L) have been summarized in three review articles.The classical syntheses involve Rh(Por)X with RLi or RMgBr, and [Rh(Por) with RX. In addition, reactions of the rhodium and iridium dimers have led to a wide variety of rhodium a-bonded complexes. For example, Rh(OEP)]2 reacts with benzyl bromide to give benzyl rhodium complexes, and with monosubstituted alkenes and alkynes to give a-alkyl and fT-vinyl products, respectively. More recent synthetic methods are summarized below. Although the development of iridium porphyrin chemistry has lagged behind that of rhodium, there have been few surprises and reactions of [IrfPorih and lr(Por)H parallel those of the rhodium congeners quite closely.Selected structural data for rr-bonded rhodium and iridium porphyrin complexes are collected in Table VI, and several examples are shown in Fig. 7. ... 

As for cyclopropanation of alkenes with aryldiazomethanes, there seems to be only one report of a successful reaction with a group 9 transition metal catalyst Rh2(OAc)4 promotes phenylcyclopropane formation with phenyldiazomethane, but satisfactory yields are obtained only with vinyl ethers 4S) (Scheme 2). Cis- and trans-stilbene as well as benzalazine represent by-products of these reactions, and Rh2(OAc)4 has to be used in an unusually high concentration because the azine inhibits its catalytic activity. With most monosubstituted alkenes of Scheme 2, a preference for the Z-cyclopropane is observed similarly, -selectivity in cyclopropanation of cyclopentene is found. These selectivities are the exact opposite to those obtained in reactions of ethyl diazoacetate with the same olefins 45). Furthermore, they are temperature-dependent for example, the cisjtrcms ratio for l-ethoxy-2-phenylcyclopropane increases with decreasing temperature. 

Palladium(II) acetate was found to be a good catalyst for such cyclopropanations with ethyl diazoacetate (Scheme 19) by analogy with the same transformation using diazomethane (see Sect. 2.1). The best yields were obtained with monosubstituted alkenes such as acrylic esters and methyl vinyl ketone (64-85 %), whereas they dropped to 10-30% for a,p-unsaturated carbonyl compounds bearing alkyl groups in a- or p-position such as ethyl crotonate, isophorone and methyl methacrylate 141). In none of these reactions was formation of carbene dimers observed. 7>ms-benzalaceto-phenone was cyclopropanated stereospecifically in about 50% yield PdCl2 and palladium(II) acetylacetonate were less efficient catalysts 34 >. Diazoketones may be used instead of diazoesters, as the cyclopropanation of acrylonitrile by diazoacenaph-thenone/Pd(OAc)2 (75 % yield) shows142). 

Negishi et al. reported the regioselective synthesis of diisoalkyl derivatives from monosubstituted alkenes in yields ranging from 58-95%, Scheme 8, from the in situ prepared ethylene complex Cp2Zr(C2H4).35 The zirconocene-ethylene complex presumably undergoes alkene insertion to furnish a zirconacyclopentane which further reacts with diethylzinc to yield the diisoalkylzinc compound. 

Monosubstituted Alkenes. Simple unbranched terminal alkenes that have only alkyl substituents, such as 1-hexene,2031-octene,209 or ally Icy clohexane230 do not undergo reduction in the presence of organosilicon hydrides and strong acids, even under extreme conditions.1,2 For example, when 1-hexene is heated in a sealed ampoule at 140° for 10 hours with triethylsilane and excess trifluoroacetic acid, only a trace of hexane is detected.203 A somewhat surprising exception to this pattern is the formation of ethylcyclohexane in 20% yield upon treatment of vinylcyclohexane with trifluoroacetic acid and triethylsilane.230 Protonation of the terminal carbon is thought to initiate a 1,2-hydride shift that leads to the formation of the tertiary 1-ethyl-1-cyclohexyl cation.230... 

An interesting antibody-catalyzed intermolecular asymmetric 1,3-dipolar cycloaddition reaction between 4-acetamidobenzonitrile N-oxide and N,N-dimethylacrylamide generating the corresponding 5-acylisoxazoline was observed (216). Reversed regioselectivity of nitrile oxide cycloaddition to a terminal alkene was reported in the reaction of 4-A rt-butylbenzonitrile oxide with 6A-acrylamido-6A-deoxy-p-cyclodextrin in aqueous solution, leading to the formation of the 4-substituted isoxazoline, in contrast to the predominance of the 5-substituted regioisomer from reactions of monosubstituted alkenes (217). 

The uncatalyzed hydroboration-oxidation of an alkene usually affords the //-Markovnikov product while the catalyzed version can be induced to produce either Markovnikov or /z/z-Markovnikov products. The regioselectivity obtained with a catalyst has been shown to depend on the ligands attached to the metal and also on the steric and electronic properties of the reacting alkene.69 In the case of monosubstituted alkenes (except for vinylarenes), the anti-Markovnikov alcohol is obtained as the major product in either the presence or absence of a metal catalyst. However, the difference is that the metal-catalyzed reaction with catecholborane proceeds to completion within minutes at room temperature, while extended heating at 90 °C is required for the uncatalyzed transformation.60 It should be noted that there is a reversal of regioselectivity from Markovnikov B-H addition in unfunctionalized terminal olefins to the anti-Markovnikov manner in monosubstituted perfluoroalkenes, both in the achiral and chiral versions.70,71... 

Monosubstituted alkenes and certain alkynes can undergo hydroalumination with iBujAl in the presence of a catalytic amount of Cp2ZrCl2, providing a convenient alternative to hydrozirconation [75]. 

Hydroalumination. Monosubstituted alkenes undergo hydroalumination with dichloroalane in the presence of (C2H5)3B or C6H5B(OH)2. Hydroalumination of more highly substituted alkenes proceeds reluctantly. The reaction is regiose-lective, and the products react with a variety of electrophiles under mild conditions. 

The formation of THF derivatives through SH2 reaction with mono- and disubstituted olefins was also investigated to define the overall scope of the transformation. Some of our results are summarized in Table 8. Not surprisingly, the monosubstituted alkene 53 gave essentially none of the desired 54 (5%). It is well known that the primary radicals produced during the 5-exo cyclization are rapidly trapped by Cp2TiCl to yield the products of a reductive cyclization [17-20,65,66,73,74]. Epoxides containing disubstituted... 

Not much is known about the reactivity of the phosphinocarbene 2i. Problems arise, at least in part, from the high 1,3-dipolar reactivity of the diazo precursor li, which hides any carbene reactivity. Indeed, although li is stable in a toluene solution at 60°C for hours, the addition of an electron-poor olefin, such as a perfluoroalkyl-monosubstituted alkene, induces the exclusive formation of the thermodynamically more stable anti-isomer of the cyclopropane 14 (see Section V,B,3,a).36 This clearly demonstrates that the cyclopropanation reaction does not involve the carbene 2i, but that an initial [2 + 3]-cycloaddition occurs leading to the pyrazoline 13, which subsequently undergoes a classical N2 elimination.37... 

---