Aldehydes with water

It is interesting to note that no specific study was devoted to the aqueous biphasic hydrogenation of aldehydes with water-soluble cobalt-phosphine complexes, although such a property has long been known from hydroformylation experiments [199,200]. 

This enzyme [EC 1.2.3.1] catalyzes the reaction of an aldehyde with water and dioxygen to produce a carboxylic acid and hydrogen peroxide. The enzyme uses both heme and molybdenum as cofactors. In addition, the enzyme can also catalyze the oxidation of quinoline and pyridine derivatives. In some systems this enzyme may be identical with xanthine oxidase. 

A Cannizzaro-type reaction occurs upon treatment of aldehydes with water to give the corresponding esters (Eq. 3.27) [8] or carboxylic acids and alcohols (Eq. 3.28) [64]. In contrast, a similar reaction in the presence of a hydrogen acceptor such as benzylideneacetone affords carboxylic acid selectively (Eq. 3.29) [8]. 

Sodium or ammonium formates are also suitable as hydride donors for the hydrogenation of a, 0-unsaturated and aromatic aldehydes with water-soluble Ru complexes [88, 93], With [RuCl2(TPPMS)2], both the catalyst and the formate are in the aqueous phase the phase-transfer problem associated with catalysts not soluble in water and aqueous formate solutions does not arise [93, 94]. These systems olfer interesting theoretical aspects [87, 95, 186]. 

Hydrolysis of the aldimine to the corresponding aldehyde with water ... 

An imine is formed by condensation of the mnine and the aldehyde, with water withdrawal by azeotropic distillation in benzene. 

Claisen reaction Condensation of an aldehyde with another aldehyde or a ketone in the presence of sodium hydroxide with the elimination of water. Thus benzaldehyde and methanal give cinnamic aldehyde, PhCH CH-CHO. 

HCOOCHjCHj. Colourless liquid with the odour of peach-kernels b.p. 54 C, Prepared by boiling ethanol and methanoic acid in the presence of a little sulphuric acid the product is diluted with water and the insoluble ester separated and distilled. Used as a fumigant and larvicide for dried fruits, tobacco and foodstuffs. It is also used in the synthesis of aldehydes. 

Hoesch synthesis A variation of the Gattermann synthesis of hydroxy-aldehydes, this reaction has been widely applied to the synthesis of anthocyanidins. It consists of the condensation of polyhydric phenols with nitriles by the action of hydrochloric acid (with or without ZnCl2 as a catalyst). This gives an iminehydrochloride which on hydrolysis with water gives the hydroxy-ketone. 

Dinitrophenylhydra2ones usually separate in well-formed crystals. These can be filtered at the pump, washed with a diluted sample of the acid in the reagent used, then with water, and then (when the solubility allows) with a small quantity of ethanol the dried specimen is then usually pure. It should, however, be recrystallised from a suitable solvent, a process which can usually be carried out with the dinitrophenylhydrazones of the simpler aldehydes and ketones. Many other hydrazones have a very low solubility in most solvents, and a recrystallisation which involves prolonged boiling with a large volume of solvent may be accompanied by partial decomposition, and with the ultimate deposition of a sample less pure than the above washed, dried and unrecrystal-lised sample. 

This Condensation should not be confused with the Claisen Reaction, which is the condensation of an aldehyde with (i) another aldehyde, or (ii) a ketone, under the influence of sodium hydroxide, and with the elimination of water. For details, see Diben zal-acetone. p, 231. 

Traces of aldehyde are produced. If ether of a high degree of purity is required, it should l>e further shaken with 0-5 per cent, potassium permanganate solution (to convert the aldehyde into acid), then with i> per cent, sodium hydroxide solution, and finally with water. 

The 5-nitrosallcylaldehyde reagent is prepared as follows. Add 0-5 g. of 5-nitrosalicylaldehyde (m.p. 124-125°) to 15 ml. of pure triethanolamine and 25 ml. of water shake until dissolved. Then introduce 0-5 g. of crystallised nickel chloride dissolved in a few ml. of water, and dilute to 100 ml. with water. If the triethanolamine contains some ethanolamine (thus causing a precipitate), it may be necessary to add a further 0 - 5 g. of the aldehyde and to filter off the resulting precipitate. The reagent is stable for long periods. 

Dissolve 57 g. of dry malonic acid in 92 5 ml. of dry P3rridine contained in a 500 ml. round-bottomed flask, cool the solution in ice, and add 57 g. (70 ml.) of freshly distilled n-heptaldehyde (oenanthol) with stirring or vigorous shaking. After a part of the aldehyde has been added, the mixture rapidly seta to a mass of crystals. Insert a cotton wool (or calcium chloride) tube into the mouth of the flask and allow the mixture to stand at room temperature for 60 hours with frequent shaking. Finally, warm the mixture on a water bath until the evolution of carbon dioxide ceases (about 8 hours) and then pour into an equal volume of water. Separate the oily layer and shake it with 150 ml. of 25 per cent hydrochloric acid to remove pyridine. Dissolve the product in benzene, wash with water, dry with anhydrous magnesium sulphate, and distil under reduced pressure. Collect the ap-nonenoic acid at 130-13272 mm. The yield is 62 g. 

In the strongly basic medium, the reactant is the phenoxide ion high nucleophilic activity at the ortho and para positions is provided through the electromeric shifts indicated. The above scheme indicates theorpara substitution is similar. The intermediate o-hydroxybenzal chloride anion (I) may react either with a hydroxide ion or with water to give the anion of salicyl-aldehyde (II), or with phenoxide ion or with phenol to give the anion of the diphenylacetal of salicylaldehyde (III). Both these anions are stable in basic solution. Upon acidification (III) is hydrolysed to salicylaldehyde and phenol this probably accounts for the recovery of much unreacted phenol from the reaction. 

From ehloromethyl or bromomethyl aromatic compounds by heating with hexamethylenetetramine (hexamine) in aqueous alcohol or aqueous acetic acid. A quaternary ammonium compound is formed, which yields the aldehyde upon treatment with water in the presence of hexamine for example... 

Heat a suspension of 22 g. of the diacetate in a mixture of 120 ml. of concentrated hydrochloric acid, 190 ml. of water and 35 ml. of alcohol under reflux for 45 minutes. Cool the mixture to 0°, filter the solid with suction, and wash with water. Purify the crude aldehyde by rapid steam distillation (Fig. II, 41, 3) collect about 1500 ml. of distillate during 15 minutes, cool, filter, and dry in a vacuum desiccator over calcium chloride. The yield of pure o-nitrobenzaldehyde, m.p. 44—45°, is 10 g. The crude solid may also be purified after drying either by distillation under reduced pressure (the distillate of rather wide b.p., e.g., 120-144°/3-6 mm., is quite pure) or by dissolution in toluene (2-2-5 ml. per gram) and precipitation with light petroleum, b.p. 40°-60° (7 ml. per ml. of solution). 

Alternatively, dissolve approximately equivalent amounts of the aldehyde (or ketone) and the solid reagent in the minimum volume of cold glacial acetic acid, and reflux for 15 minutes. The p-nitrophenyl-hydrazone separates on cooling or upon careful dilution with water. 

Separations based upon differences in the chemical properties of the components. Thus a mixture of toluene and anihne may be separated by extraction with dilute hydrochloric acid the aniline passes into the aqueous layer in the form of the salt, anihne hydrochloride, and may be recovered by neutralisation. Similarly, a mixture of phenol and toluene may be separated by treatment with dilute sodium hydroxide. The above examples are, of comse, simple apphcations of the fact that the various components fah into different solubihty groups (compare Section XI,5). Another example is the separation of a mixture of di-n-butyl ether and chlorobenzene concentrated sulphuric acid dissolves only the w-butyl other and it may be recovered from solution by dilution with water. With some classes of compounds, e.g., unsaturated compounds, concentrated sulphuric acid leads to polymerisation, sulphona-tion, etc., so that the original component cannot be recovered unchanged this solvent, therefore, possesses hmited apphcation. Phenols may be separated from acids (for example, o-cresol from benzoic acid) by a dilute solution of sodium bicarbonate the weakly acidic phenols (and also enols) are not converted into salts by this reagent and may be removed by ether extraction or by other means the acids pass into solution as the sodium salts and may be recovered after acidification. Aldehydes, e.g., benzaldehyde, may be separated from liquid hydrocarbons and other neutral, water-insoluble hquid compounds by shaking with a solution of sodium bisulphite the aldehyde forms a sohd bisulphite compound, which may be filtered off and decomposed with dilute acid or with sodium bicarbonate solution in order to recover the aldehyde. 

Apart from the thoroughly studied aqueous Diels-Alder reaction, a limited number of other transformations have been reported to benefit considerably from the use of water. These include the aldol condensation , the benzoin condensation , the Baylis-Hillman reaction (tertiary-amine catalysed coupling of aldehydes with acrylic acid derivatives) and pericyclic reactions like the 1,3-dipolar cycloaddition and the Qaisen rearrangement (see below). These reactions have one thing in common a negative volume of activation. This observation has tempted many authors to propose hydrophobic effects as primary cause of ftie observed rate enhancements. 

You know how just a couple of paragraphs ago where the chemist first filtered the crude crystals from the chilled reaction mixture, then washed them with water or acetic acid Well, all that liquid filtrate has a lot of valuable, unreacted piperonal or benzaldehyde in it. To rescue the stuff the chemist dilutes the mixture with 500ml dHaO and extracts it with DCM. The DCM is washed with 100ml 5% NaOH solution then vacuum distilled to give a dark oil which is unreacted aldehyde. Hey That s a lot of good material that can be put through the process again. 

Terminal alkyne anions are popular reagents for the acyl anion synthons (RCHjCO"). If this nucleophile is added to aldehydes or ketones, the triple bond remains. This can be con verted to an alkynemercury(II) complex with mercuric salts and is hydrated with water or acids to form ketones (M.M.T. Khan, 1974). The more substituted carbon atom of the al-kynes is converted preferentially into a carbonyl group. Highly substituted a-hydroxyketones are available by this method (J.A. Katzenellenbogen, 1973). Acetylene itself can react with two molecules of an aldehyde or a ketone (V. jager, 1977). Hydration then leads to 1,4-dihydroxy-2-butanones. The 1,4-diols tend to condense to tetrahydrofuran derivatives in the presence of acids. 

The decarboxylation of allyl /3-keto carboxylates generates 7r-allylpalladium enolates. Aldol condensation and Michael addition are typical reactions for metal enolates. Actually Pd enolates undergo intramolecular aldol condensation and Michael addition. When an aldehyde group is present in the allyl fi-keto ester 738, intramolecular aldol condensation takes place yielding the cyclic aldol 739 as a main product[463]. At the same time, the diketone 740 is formed as a minor product by /3-eIimination. This is Pd-catalyzed aldol condensation under neutral conditions. The reaction proceeds even in the presence of water, showing that the Pd enolate is not decomposed with water. The spiro-aldol 742 is obtained from 741. Allyl acetates with other EWGs such as allyl malonate, cyanoacetate 743, and sulfonylacetate undergo similar aldol-type cycliza-tions[464]. 

Effects of Structure on Equilibrium Aldehydes and ketones react with water m a rapid equilibrium The product is a gemmal diol... 

The mixture is cooled and noncondensable gases are scmbbed with water. Some of the resultant gas stream, mainly hydrogen, may be recycled to control catalyst fouhng. The Hquids are fractionally distilled, taking acetone overhead and a mixture of isopropyl alcohol and water as bottoms. A caustic treatment maybe used to remove minor aldehyde contaminants prior to this distillation (29). In another fractionating column, the aqueous isopropyl alcohol is concentrated to about 88% for recycle to the reactor. 

When PET is extracted with water no detectable quantities of ethylene glycol or terephthaUc acid can be found, even at elevated extraction temperatures (110). Extractable materials are generally short-chained polyesters and aldehydes (110). Aldehydes occur naturally iu foods such as fmits and are produced metabohcaHy iu the body. Animal feeding studies with extractable materials show no adverse health effects. 

Ketones, like aldehydes, tend to form a2eotropes with water and other substances. A table of ketone—water a2eotropes for some commercially produced ketones is Hsted in Table 2. 

Reactions. Heating an aqueous solution of malonic acid above 70°C results in its decomposition to acetic acid and carbon dioxide. Malonic acid is a useful tool for synthesizing a-unsaturated carboxyUc acids because of its abiUty to undergo decarboxylation and condensation with aldehydes or ketones at the methylene group. Cinnamic acids are formed from the reaction of malonic acid and benzaldehyde derivatives (1). If aUphatic aldehydes are used acryhc acids result (2). Similarly this facile decarboxylation combined with the condensation with an activated double bond yields a-substituted acetic acid derivatives. For example, 4-thiazohdine acetic acids (2) are readily prepared from 2,5-dihydro-l,3-thiazoles (3). A further feature of malonic acid is that it does not form an anhydride when heated with phosphorous pentoxide [1314-56-3] but rather carbon suboxide [504-64-3] [0=C=C=0], a toxic gas that reacts with water to reform malonic acid. 

The zwitterion (6) can react with protic solvents to produce a variety of products. Reaction with water yields a transient hydroperoxy alcohol (10) that can dehydrate to a carboxyUc acid or spHt out H2O2 to form a carbonyl compound (aldehyde or ketone, R2CO). In alcohoHc media, the product is an isolable hydroperoxy ether (11) that can be hydrolyzed or reduced (with (CH O) or (CH2)2S) to a carbonyl compound. Reductive amination of (11) over Raney nickel produces amides and amines (64). Reaction of the zwitterion with a carboxyUc acid to form a hydroperoxy ester (12) is commercially important because it can be oxidized to other acids, RCOOH and R COOH. Reaction of zwitterion with HCN produces a-hydroxy nitriles that can be hydrolyzed to a-hydroxy carboxyUc acids. Carboxylates are obtained with H2O2/OH (65). The zwitterion can be reduced during the course of the reaction by tetracyanoethylene to produce its epoxide (66). 

PIcollnIc aldehyde (4). BenzenesuHonyl chlonde (6 92 g, 40 mmol) was added with stirring to a chilled solution ol picollnic hydrazide 2 (4 62 g, 33 mmol) in pyndlne (3S mL). After l h the solvent was removed In vacuum, the residue stirred with water, liliered and the solid washed with EtOH and EtzO to afford 10 5 g ol 3 (100%), mp 202-203°C... 

---