On-the-fly minimum-volume

It is expecting a lot of the service companies to ask them to enthusiastically endorse the idea of on-the-fly minimum-volume acid treatment, especially offshore or in remote locations. Any acid that was not pumped (because it was not needed) must be taken back. Understandably, service companies do not embrace this requirement. Nevertheless, in locations where they are not totally impractical, such treatments are viable and agreeable. 

It is assumed that the moisture content of the soil has been determined to be approximately 50% under worst-case conditions. Using this information and the results from vendor tests, it has been determined that a minimum dose of one part solidification reagent to two parts soil is required for the migration control of lead. Testing has shown that the optimum solidification reagent mixture would comprise ca. 50% fly ash and ca. 50% kiln dust. Thus, ca. 7000 t (6364 T) each of fly ash and cement kiln dust would be required. The reagents would be added in situ with a backhoe. As one area of the soil is fixed, the equipment could be moved onto the fixed soil to blend the next section. It may be anticipated that the soil volume would expand by ca. 20% as a result of the fixation process. This additional volume would be used to achieve the required slope for the cap. An RCRA soil/clay cap placed over the solidified material is necessary to prevent infiltration and additional hydraulic stress on the fixed soil. It is estimated that the fixation would reduce lead migration by 40% and that the fixed soil may pass the U.S. EPA levels for lead. 

---