Alcohols, catalytic oxidation

Surface plasmon resonance 1000 Surfactants 948, 972 Suzuki coupling 1406, 1424 Sympathomimetic drugs 995 Synergism 889-891 Syringic acid, irradiation of 1079 Syringyl alcohol, catalytic oxidation of 1205, 1208... 

A catalytic enantio- and diastereoselective dihydroxylation procedure without the assistance of a directing functional group (like the allylic alcohol group in the Sharpless epox-idation) has also been developed by K.B. Sharpless (E.N. Jacobsen, 1988 H.-L. Kwong, 1990 B.M. Kim, 1990 H. Waldmann, 1992). It uses osmium tetroxide as a catalytic oxidant (as little as 20 ppm to date) and two readily available cinchona alkaloid diastereomeis, namely the 4-chlorobenzoate esters or bulky aryl ethers of dihydroquinine and dihydroquinidine (cf. p. 290% as stereosteering reagents (structures of the Os complexes see R.M. Pearlstein, 1990). The transformation lacks the high asymmetric inductions of the Sharpless epoxidation, but it is broadly applicable and insensitive to air and water. Further improvements are to be expected. 

Alcohols are oxidized slowly with PdCh. Oxidation of secondary alcohols to ketones is carried out with a catalytic amount of PdCh under an oxygen atmo-sphere[73.74]. Also, selective oxidation of the allylic alcohol 571 without attacking saturated alcohols is possible with a stoichiometric amount of PdfOAc) in aqueous DMF (1% H OifSll],... 

Oxidative carbonylation of alcohols with PdCh affords the carbonate 572 and oxalate 573(512-514]. The selectivity of the mono- and dicarbonylation depends on the CO pressure and reaction conditions. In order to make the reaction catalytic, Cu(II) and Fe(III) salts are used. Under these conditions, water is formed and orthoformate is added in order to trap the water. Di-/-butyl peroxide is also used for catalytic oxidative carbonylation to give carbonates and oxalates in the presence of 2,6-dimetliylpyridine(515]. 

From Ethyl Alcohol. Some acetaldehyde is produced commercially by the catalytic oxidation of ethyl alcohol. The oxidation is carried out by passing alcohol vapors and preheated air over a silver catalyst at 480°C (98). 

Direct oxidation of hydrocarbons and catalytic oxidation of isopropyl alcohol have also been used for commercial production of acetone. 

Ca.ta.lysis, The mechanism of hydrogen abstraction from alcohols to form aldehydes (qv) over silver has been elucidated (11). Silver is the principal catalyst for the production of formaldehyde (qv), the U.S. production of which was 4 x 10 metric tons in 1993. The catalytic oxidation of... 

The reaction is limited to allylic alcohols other types of alkenes do not or not efficiently enough bind to the titanium. The catalytically active chiral species can be regenerated by reaction with excess allylic alcohol and oxidant however the titanium reagent is often employed in equimolar amount. 

The complex Pd-(-)-sparteine was also used as catalyst in an important reaction. Two groups have simultaneously and independently reported a closely related aerobic oxidative kinetic resolution of secondary alcohols. The oxidation of secondary alcohols is one of the most common and well-studied reactions in chemistry. Although excellent catalytic enantioselective methods exist for a variety of oxidation processes, such as epoxidation, dihydroxy-lation, and aziridination, there are relatively few catalytic enantioselective examples of alcohol oxidation. The two research teams were interested in the metal-catalyzed aerobic oxidation of alcohols to aldehydes and ketones and became involved in extending the scopes of these oxidations to asymmetric catalysis. 

As described above, the enzymatic polymerization of phenols was often carried out in a mixture of a water-miscible organic solvent and a buffer. By adding 2,6-di-0-methyl-(3-cyclodextrin (DM-(3-CD), the enzymatic polymerization of water-insoluble m-substituted phenols proceeded in buffer. The water-soluble complex of the monomer and DM-(3-CD was formed and was polymerized by HRP to give a soluble polymer. In the case of phenol, the polymerization took place in the presence of 2,6-di-O-methyl-a-cyclodextrin (DM-a-CD) in a buffer. Only a catalytic amount of DM-a-CD was necessary to induce the polymerization efficiently. Coniferyl alcohol was oxidatively polymerized in the presence of a-CD in an aqueous solution. ... 

Seddon, K.R. Stark, A. (2002) Selective Catalytic Oxidation of Benzyl Alcohol and Alkylbenzenes in Ionic Liquids. Green Chemistry, 4(2), 119-123. 

Figure 49.2. Catalytic oxidation of the allylic alcohols 11, 16 and 17 with FePcCli -S to the corresponding a, 5-unsaturated ketones. Reaction conditions 0.125 M allylic alcohol in acetone, 0.5 % mol FePcClis-S, 1.3 mmol of dry TBHP, 40T, 3 h.

Attempts to achieve selective oxidations of hydrocarbons or other compounds when the desired site of attack is remote from an activating functional group are faced with several difficulties. With powerful transition-metal oxidants, the initial oxidation products are almost always more susceptible to oxidation than the starting material. When a hydrocarbon is oxidized, it is likely to be oxidized to a carboxylic acid, with chain cleavage by successive oxidation of alcohol and carbonyl intermediates. There are a few circumstances under which oxidations of hydrocarbons can be synthetically useful processes. One group involves catalytic industrial processes. Much effort has been expended on the development of selective catalytic oxidation processes and several have economic importance. We focus on several reactions that are used on a laboratory scale. 

One of the exciting results to come out of heterogeneous catalysis research since the early 1980s is the discovery and development of catalysts that employ hydrogen peroxide to selectively oxidize organic compounds at low temperatures in the liquid phase. These catalysts are based on titanium, and the important discovery was a way to isolate titanium in framework locations of the inner cavities of zeolites (molecular sieves). Thus, mild oxidations may be run in water or water-soluble solvents. Practicing organic chemists now have a way to catalytically oxidize benzene to phenols alkanes to alcohols and ketones primary alcohols to aldehydes, acids, esters, and acetals secondary alcohols to ketones primary amines to oximes secondary amines to hydroxyl-amines and tertiary amines to amine oxides. 

Oliveira, R.L., Kiyohara, P.K. and Rossi, L.M. (2010) High performance magnetic separation of gold nanoparticles for catalytic oxidation of alcohols. Green Chemistry, 12 (1), 144-149. 

Oxalate 111 is formed when the reaction is carried out in the presence of air. In that case, catalytic oxidation of cyclohexene to cyclohexen-3-ol takes place. The alcohol reacts with... 

The question about the competition between the homolytic and heterolytic catalytic decompositions of ROOH is strongly associated with the products of this decomposition. This can be exemplified by cyclohexyl hydroperoxide, whose decomposition affords cyclo-hexanol and cyclohexanone [5,6]. When decomposition is catalyzed by cobalt salts, cyclohex-anol prevails among the products ([alcohol] [ketone] > 1) because only homolysis of ROOH occurs under the action of the cobalt ions to form RO and R02 the first of them are mainly transformed into alcohol (in the reactions with RH and Co2+), and the second radicals are transformed into alcohol and ketone (ratio 1 1) due to the disproportionation (see Chapter 2). Heterolytic decomposition predominates in catalysis by chromium stearate (see above), and ketone prevails among the decomposition products (ratio [ketone] [alcohol] = 6 in the catalytic oxidation of cyclohexane at 393 K [81]). These ions, which can exist in more than two different oxidation states (chromium, vanadium, molybdenum), are prone to the heterolytic decomposition of ROOH, and this seems to be mutually related. 

James An early process for making mixed oxygenated organic compounds by the catalytic oxidation of petroleum fractions. The products were aldehydes, alcohols, and carboxylic acids. Developed by J. H. James at the Carnegie Institute of Technology, Pittsburgh. 

Catalytic asymmetric hydrosilylation of prochiral olefins has become an interesting area in synthetic organic chemistry since the first successful conversion of alkyl-substituted terminal olefins to optically active secondary alcohols (>94% ee) by palladium-catalyzed asymmetric hydrosilylation in the presence of chiral monodentate phosphine ligand (MOP, 20). The introduced silyl group can be converted to alcohol via oxidative cleavage of the carbon-silicon bond (Scheme 8-8).27... 

Selective oxidation of allylic alcohols.1 This zircononcene complex when used in catalytic amount can effect an Oppenauer-type oxidation of alcohols, including allylic ones, in the presence of a hydrogen acceptor, usually benzaldehyde or cyclohexanone. This system oxidizes primary alcohols selectively in the presence of secondary ones. Thus primary allylic alcohols are oxidized to the enals with retention of the configuration of the double bond in 75-95% yield. The method is not useful for oxidation of propargylic alcohols. 

Catalytic oxidant.1 In combination with N-methylmorpholine N-oxide (7,244) as the stoichiometric oxidant, this ruthenium compound can be used as a catalytic oxidant for oxidation of alcohols to aldehydes or ketones in high yield in CH2C12 at 25°. Addition of 4A molecular sieves is generally beneficial. Racemization is not a problem in oxidation of alcohols with an adjacent chiral center. Tetrabutylammonium perruthenate can also be used as a catalytic oxidant, but the preparation is less convenient. 

The titanosilicate version of UTD-1 has been shown to be an effective catalyst for the oxidation of alkanes, alkenes, and alcohols (77-79) by using peroxides as the oxidant. The large pores of Ti-UTD-1 readily accommodate large molecules such as 2,6-di-ferf-butylphenol (2,6-DTBP). The bulky 2,6-DTBP substrate can be converted to the corresponding quinone with activity and selectivity comparable to the mesoporous catalysts Ti-MCM-41 and Ti-HMS (80), where HMS = hexagonal mesoporous silica. Both Ti-UTD-1 and UTD-1 have also been prepared as oriented thin films via a laser ablation technique (81-85). Continuous UTD-1 membranes with the channels oriented normal to the substrate surface have been employed in a catalytic oxidation-separation process (82). At room temperature, a cyclohexene-ferf-butylhydroperoxide was passed through the membrane and epoxidation products were trapped on the down stream side. The UTD-1 membranes supported on metal frits have also been evaluated for the separation of linear paraffins and aromatics (83). In a model separation of n-hexane and toluene, enhanced permeation of the linear alkane was observed. Oriented UTD-1 films have also been evenly coated on small 3D objects such as glass and metal beads (84, 85). 

---