Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Thin films orientation

The examples in Figure 3 illustrate these possibilities. Figure 3a shows a diffraction pattern from a single crystal Fe thin film, oriented with the [001] crystal axis... [Pg.104]

Fig. 2 Schematic representation of control of block copolymer thin film orientations by adjusting polymer-substrate interactions neutral interfaces... Fig. 2 Schematic representation of control of block copolymer thin film orientations by adjusting polymer-substrate interactions neutral interfaces...
Fig. 3 Schematic representation of control over block copolymer thin film orientation by applying an electric field to orient PS-6-PMMA cylinders perpendicular to the substrate (taken from [43])... Fig. 3 Schematic representation of control over block copolymer thin film orientation by applying an electric field to orient PS-6-PMMA cylinders perpendicular to the substrate (taken from [43])...
Fig. 6 Schematic representation of controlling the block copolymer thin film orientations by using top-down lithography-defined chemically patterned heterogeneous sin-face... Fig. 6 Schematic representation of controlling the block copolymer thin film orientations by using top-down lithography-defined chemically patterned heterogeneous sin-face...
Fig. 3.1. Pentacene structure, crystalline order, and thin-film orientation. Fig. 3.1. Pentacene structure, crystalline order, and thin-film orientation.
Figure 12.8 Cryo-TEM micrographs of 5-nm-diameter wormy micelles in 0.05 M CTAC with added (a) 0.05 M NaSal and (b) 0.10 M NaSal. All samples were squeezed to form thin films. Orientation induced by squeezing was allowed time to relax in (a), but not in (b). Bar =100 nm. (Reprinted with permission from Clausen et al., Journal of Physical Chemistry 96 474 Copyright < lyy2, American Chemical Society.)... Figure 12.8 Cryo-TEM micrographs of 5-nm-diameter wormy micelles in 0.05 M CTAC with added (a) 0.05 M NaSal and (b) 0.10 M NaSal. All samples were squeezed to form thin films. Orientation induced by squeezing was allowed time to relax in (a), but not in (b). Bar =100 nm. (Reprinted with permission from Clausen et al., Journal of Physical Chemistry 96 474 Copyright < lyy2, American Chemical Society.)...
Da Costa, V, Le Moigne, J., Oswald, L., Pham, T, Thierry, A., 1998. Thin film orientation by epitaxy of... [Pg.98]

Liu, B., Shekhah, O., Arslan, H. K., Liu, J. X., WoU, C., and Fischer, R. A. Enantiopure metal-organic fiamework thin films Oriented SURMOF growth and enantioselective adsorption. Angew Chem Int Edit 51, 807-810 (2012). [Pg.102]

Single crystal LB film (blue) Thin film Oriented film Oriented film Thin film LB film Thin film Thin film Thin film Oriented thin film... [Pg.541]

Fracture surface of CNT/epoxy thin film, oriented in radial direction. CNT bundles are seen coated with epoxy. Schematic of the shaft- loaded test setup is shown in the inset. [Pg.340]


See other pages where Thin films orientation is mentioned: [Pg.169]    [Pg.205]    [Pg.278]    [Pg.29]    [Pg.157]    [Pg.194]    [Pg.253]    [Pg.157]    [Pg.194]    [Pg.309]   
See also in sourсe #XX -- [ Pg.487 ]




SEARCH



Films orientation

Oriented films

© 2024 chempedia.info