Additives for flavoring

Lactic acid (CH3-CHOH-COOH) is commonly used as a food additive for flavor and preservation. It is also converted into a polylactide polymer, which represents one of the first commercial applications of... 

Noyori s BINAP catalysts deserve special attention because their chirality is based on the bulkiness of the naphthalene groups, rather than on carbon or phosphorus asymmetric centers (Figure 3.28, inset) [77]. One of the many examples of asymmetric catalysis using BINAP is the synthesis of (—)-menthol, an important additive for flavors, fragrances, and pharmaceuticals. Starting from myrcene, the process is carried out by Takasago International on a multi-ton scale. The key step is the isomerization of geranyldiethylamine to (R)-citronellal enamine [78], which is then hydrolyzed to (R)-citronellal with nearly 99% ee. 

Triethyl citrate is also used as a direct food additive for flavoring, for solvency, and as a surface active agent. 

Larch arabinogalactan is approved in 21 CFR 172.610 as a food additive for use as an emulsifier, stabilizer, binder or bodying agent for essential oils and noimutritive sweeteners, flavor bases, nonstandardized dressings, and pudding mixes. It has also been used in the preparation of cosmetic and pharmaceutical dispersions and as an emulsifier in oil—water emulsions (69). Industrially, the main use has been in Hthography as a gum arabic substitute. 

Elavored carbonated beverages, or soft drinks, were developed by apothecaries and chemists in the early nineteenth century by the addition of flavored symps to fountain-dispensed carbonated water. The introduction of proprietary flavors began in the late 1880s. Charles H. Hires introduced his root beer extract in 1876, Vemors s Ginger Ale was marketed by James Vernor in 1880, R. S. La2enby perfected the formula for Dr. Pepper in 1885, and John S. Pemberton developed the formula for Coca-Cola in 1886. Brad s Drink was introduced in 1896 and was later renamed Pepsi-Cola in 1898. 

Maltol. Otsuka Chemical Co. in Japan has operated several electroorganic processes on a small commercial scale. It has used plate and frame and aimular cells at currents in the range of 4500—6000 A (133). The process for the synthesis of maltol [118-71 -8], a food additive and flavor enhancer, starts from furfural [98-01-1] (see Food additives Flavors and spices). The electrochemical step is the oxidation of a-methylfurfural to give a cycHc acetal. The remaining reaction sequence is acid-catalyzed ring expansion, epoxidation with hydrogen peroxide, and then acid-catalyzed rearrangement to yield maltol, ie ... 

Turmeric is used mainly as a spice, to give specific flavor and color, but also as an additive for maintaining freshness and improving the palatability and shelf lives of perishable foods. Turmeric is also well documented for its biological effects and it was widely used in traditional Indian and Chinese medicine. In Ayurveda, turmeric is used as a stomachic, tonic, and blood purifier, and also in the treatment of skin diseases. 

Second, the essential amino acids leucine, isoleucine, and phenylalanine are precursors for several additional tomato flavor elements. Here, too, these flavor elements are important flavor constituents in other fruits, including strawberries and apples. They are also found in breads, cheeses, wine, and beer. 

Additives are all formulation constituents other than the active ingredient. Although additives could be classified into excipients and vehicles (excipients for solid preparations and vehicles for liquid ones), there are several other agents used in pharmaceutical formulations with specific functions such as preservatives, sweeteners, coatings, colorants, antioxidants, surfactants, emulsifying agents, and flavors. Since they comprise a vast amount of products, this section will deal with additives for compounding pharmaceutical products for internal use only [17,18]. 

Chemical modification of simple sugars during drying, baking, or roasting operations can either have a desirable or undesirable effect upon the organoleptic quality of the final product. We have become accustomed to the characteristic roasted or baked flavors of coffee, peanuts, popcorn, and freshly-baked bread. The color and flavor and aroma of caramel make it a useful additive for the food industry. On the other hand, the burnt flavor of overheated dry beans or soy milk reduces marketability of these products. 

Spray drying is the most widely used, least expensive and favored route among the methods available for encapsulation (2) Various theories of volatile retention in spray drying have been proposed and reviewed (3). In addition to the nature of flavor compounds, flavor retention is governed by type of carriers, infeed composition, solids concentration (4), dryer inlet/exit air temperature, air velocity and humidity, feeding rate and atomization characteristics. In addition to flavor retention,the stability of the encapsulated product, as mentioned earlier, is also of importance and is governed by nearly the same parameters. However,the effect and mechanics of each individual factor are much less understood. 

MYRISTIC ACID. [CAS 544-63-8]. Also called tetradecanoic acid, formula CHjlCHiJnCOOH, At room temperature, it is an oily, white crystalline solid. Soluble in alcohol and ether insoluble in water. Specific gravity 0.8739 (80°C) mp 54.4°C bp 326.2°C. Combustible. The acid is derived by the fractional distillation of coconut oil. Myristic ucid is used in soaps cosmetics in the synthesis of esters for flavorings and perfumes and as a component of food-grade additives, Myristic acid is a constituent of several vegetable oils. See also Vegetable Oils (Edible). 

In flavor analysis, the most frequent use of volatile traps is in analyzing the flavor compounds in foods using purge-and-trap or dynamic headspace, followed by GC-MS or GCO. Additionally, the traps can be used to measure static headspace and air-matrix partition coefficients where air is pushed out of an equilibrated cell containing the sample onto a volatile trap (Chaintreau et al., 1995). Volatile traps have been also used for flavor release measurements during eating (Linforth and Taylor, 1993) or simulated eating (Roberts and Acree, 1995). 

In California, fortified sweet wines of light color, such as angelica and white port, may be used as a base wine for making sweet vermouth. The desired sugar content is obtained, as necessary, by the addition of grape concentrate or sucrose. The amount of water added as a result may not exceed 10% by volume of the vermouth. Citric acid may be added to adjust total acidity. The alcohol content must be sufficiently high to adjust for dilution when extracts low in alcohol are employed for flavoring. 

Brandy or alcohol extracts of spices and herbs may be used for flavoring vermouth (Rizzo, 1957). Spices like anola, and ginger are known to possess medicinal properties, as well as antimicrobial activities (Joshi and John, 2002). The precise details of extraction differ among manufactures. The more important botanical constituents include coriander, cloves, chamomile, dittany of Crete, orris, and quassia. Additional flavorant may include allspice, angelica, anise, bitter almond, cinchona, coriander, juniper, nutmeg, orange peel, and rhubarb. 

Perfumes, colognes and toilet waters are solutions of perfume oils in specially denatured alcohols, (ethyl alcohol with various denaturants which make it unsuitable for human consumption). In addition, ethanol is used as a solvent for flavors, as an extraction solvent for many natural products and as a reagent for the production of many ethyl esters. Summing up all these uses, the quantity of ethanol used in the fragrance and flavor industry tops all other alcohols by far. 

Consideration of flavors used in food presents some unique problems not typically associated with other food additives. For example, there are a vast number — well over a thousand — of different substances that are used as ingredients for the single technical purpose of imparting flavor to foods. These, of course, do not include the flavors already naturally occurring in foods themselves. The number of flavor additives alone far exceeds the total number of other direct or Intentional food additives used for all other purposes (4). 

---