Acids chemical properties

Amino Acids, Chemical Properties of Click Peptides, Design and Application of Peptide Combinatorial Libraries Solid-Phase Synthesis of Biomolecules... 

Chemical Modification of Proteins Amino Acids, Chemical Properties of Enzyme Catalysis, Chemical Strategies for Proteins, In Vivo Chemical Modifications of Peptides, Chemistry of... 

Chemical properties of deposited monolayers have been studied in various ways. The degree of ionization of a substituted coumarin film deposited on quartz was determined as a function of the pH of a solution in contact with the film, from which comparison with Gouy-Chapman theory (see Section V-2) could be made [151]. Several studies have been made of the UV-induced polymerization of monolayers (as well as of multilayers) of diacetylene amphiphiles (see Refs. 168, 169). Excitation energy transfer has been observed in a mixed monolayer of donor and acceptor molecules in stearic acid [170]. Electrical properties have been of interest, particularly the possibility that a suitably asymmetric film might be a unidirectional conductor, that is, a rectifier (see Refs. 171, 172). Optical properties of interest include the ability to make planar optical waveguides of thick LB films [173, 174]. 

The chemical properties of nitric acid require us to consider the structure first. The vapour of pure nitric acid (i.e. anhydrous) is probably composed of molecules of hydrogen nitrate , which structurally is a resonance hybrid of such forms as ... 

Separations based upon differences in the chemical properties of the components. Thus a mixture of toluene and anihne may be separated by extraction with dilute hydrochloric acid the aniline passes into the aqueous layer in the form of the salt, anihne hydrochloride, and may be recovered by neutralisation. Similarly, a mixture of phenol and toluene may be separated by treatment with dilute sodium hydroxide. The above examples are, of comse, simple apphcations of the fact that the various components fah into different solubihty groups (compare Section XI,5). Another example is the separation of a mixture of di-n-butyl ether and chlorobenzene concentrated sulphuric acid dissolves only the w-butyl other and it may be recovered from solution by dilution with water. With some classes of compounds, e.g., unsaturated compounds, concentrated sulphuric acid leads to polymerisation, sulphona-tion, etc., so that the original component cannot be recovered unchanged this solvent, therefore, possesses hmited apphcation. Phenols may be separated from acids (for example, o-cresol from benzoic acid) by a dilute solution of sodium bicarbonate the weakly acidic phenols (and also enols) are not converted into salts by this reagent and may be removed by ether extraction or by other means the acids pass into solution as the sodium salts and may be recovered after acidification. Aldehydes, e.g., benzaldehyde, may be separated from liquid hydrocarbons and other neutral, water-insoluble hquid compounds by shaking with a solution of sodium bisulphite the aldehyde forms a sohd bisulphite compound, which may be filtered off and decomposed with dilute acid or with sodium bicarbonate solution in order to recover the aldehyde. 

We have already discussed one important chemical property of alkynes the acidity of acetylene and terminal alkynes In the remaining sections of this chapter several other reactions of alkynes will be explored Most of them will be similar to reactions of alkenes Like alkenes alkynes undergo addition reactions We 11 begin with a reaction familiar to us from our study of alkenes namely catalytic hydrogenation... 

The most apparent chemical property of carboxylic acids their acidity has already been examined m earlier sections of this chapter Three reactions of carboxylic acids—con version to acyl chlorides reduction and esterification—have been encountered m pre vious chapters and are reviewed m Table 19 5 Acid catalyzed esterification of carboxylic acids IS one of the fundamental reactions of organic chemistry and this portion of the chapter begins with an examination of the mechanism by which it occurs Later m Sec tions 19 16 and 19 17 two new reactions of carboxylic acids that are of synthetic value will be described... 

Multiple Chiral Centers. The number of stereoisomers increases rapidly with an increase in the number of chiral centers in a molecule. A molecule possessing two chiral atoms should have four optical isomers, that is, four structures consisting of two pairs of enantiomers. However, if a compound has two chiral centers but both centers have the same four substituents attached, the total number of isomers is three rather than four. One isomer of such a compound is not chiral because it is identical with its mirror image it has an internal mirror plane. This is an example of a diaster-eomer. The achiral structure is denoted as a meso compound. Diastereomers have different physical and chemical properties from the optically active enantiomers. Recognition of a plane of symmetry is usually the easiest way to detect a meso compound. The stereoisomers of tartaric acid are examples of compounds with multiple chiral centers (see Fig. 1.14), and one of its isomers is a meso compound. 

Now that we know something about EDTA s chemical properties, we are ready to evaluate its utility as a titrant for the analysis of metal ions. To do so we need to know the shape of a complexometric EDTA titration curve. In Section 9B we saw that an acid-base titration curve shows the change in pH following the addition of titrant. The analogous result for a titration with EDTA shows the change in pM, where M is the metal ion, as a function of the volume of EDTA. In this section we learn how to calculate the titration curve. We then show how to quickly sketch the titration curve using a minimum number of calculations. 

The important chemical properties of acetyl chloride, CH COCl, were described ia the 1850s (10). Acetyl chloride was prepared by distilling a mixture of anhydrous sodium acetate [127-09-3J, C2H202Na, and phosphorous oxychloride [10025-87-3] POCl, and used it to interact with acetic acid yielding acetic anhydride. Acetyl chloride s violent reaction with water has been used to model Hquid-phase reactions. 

Chemical Properties and Industrial Uses. Chloroacetic acid has wide appHcations as an industrial chemical intermediate. Both the carboxyhc acid group and the cx-chlorine are very reactive. It readily forms esters and amides, and can undergo a variety of cx-chlorine substitutions. 

Table 1. Physical and Chemical Properties of Adipic Acid...

Chemical Properties. Under slightly acidic or basic conditions at room temperature, acetate and triacetate fibers are resistant to chlorine bleach at the concentrations normally used in laundering. 

Chemical Properties. The hydrolysis of PET is acid- or base-catalyzed and is highly temperature dependent and relatively rapid at polymer melt temperatures. Treatment for several weeks in 70°C water results in no significant fiber strength loss. However, at 100°C, approximately 20% of the PET tenacity is lost in one week and about 60% is lost in three weeks (47). In general, the hydrolysis and chemical resistance of copolyester materials is less than that for PET and depends on both the type and amount of comonomer. 

Chemical Properties. Sulfur tetrafluoride reacts rapidly with water to give hydrofluoric acid and thionyl fluoride [7783 2-8] ... 

Chemical Properties. A combination of excellent chemical and mechanical properties at elevated temperatures result in high performance service in the chemical processing industry. Teflon PEA resins have been exposed to a variety of organic and inorganic compounds commonly encountered in chemical service (26). They are not attacked by inorganic acids, bases, halogens, metal salt solutions, organic acids, and anhydrides. Aromatic and ahphatic hydrocarbons, alcohols, aldehydes, ketones, ethers, amines, esters, chlorinated compounds, and other polymer solvents have Httle effect. However, like other perfluorinated polymers,they react with alkah metals and elemental fluorine. 

Formic acid exhibits many of the typical chemical properties of the aHphatic carboxyHc acids, eg, esterification and amidation, but, as is common for the first member of an homologous series, there are distinctive differences in properties between formic acid and its higher homologues. The smaller inductive effect of hydrogen in comparison to an alkyl group leads, for example, to formic acid = 3.74) being a considerably stronger acid than acetic acid... 

Chemical Properties. Neopentyl glycol can undergo typical glycol reactions such as esterification (qv), etherification, condensation, and oxidation. When basic kinetic studies of the esterification rate were carried out for neopentyl glycol, the absolute esterification rate of neopentyl glycol with / -butyric acid was approximately 20 times that of ethylene glycol with / -butyric acid (7). 

Chemical Properties. Trimethylpentanediol, with a primary and a secondary hydroxyl group, enters into reactions characteristic of other glycols. It reacts readily with various carboxyUc acids and diacids to form esters, diesters, and polyesters (40). Some organometaUic catalysts have proven satisfactory for these reactions, the most versatile being dibutyltin oxide. Several weak bases such as triethanolamine, potassium acetate, lithium acetate, and borax are effective as stabilizers for the glycol during synthesis (41). 

Each isomer has its individual set of physical and chemical properties however, these properties are similar (Table 6). The fundamental chemical reactions for pentanes are sulfonation to form sulfonic acids, chlorination to form chlorides, nitration to form nitropentanes, oxidation to form various compounds, and cracking to form free radicals. Many of these reactions are used to produce intermediates for the manufacture of industrial chemicals. Generally the reactivity increases from a primary to a secondary to a tertiary hydrogen (37). Other properties available but not Hsted are given in equations for heat capacity and viscosity (34), and saturated Hquid density (36). 

Chemical Properties. Its two functional groups permit a wide variety of chemical reactions for lactic acid. The primary classes of these reactions are oxidation, reduction, condensation, and substitution at the alcohol group. 

Chemical Properties. Because of its chiral center, malic acid is optically active. In 1896, when tartaric acid was first reduced to malic acid, the levorotatory enantiomer, S(—), was confirmed as having the spatial configuration (1) (5,6). The other enantiomer (2) has the R configuration. A detailed discussion of configuration assignment by the sequence rule or the R and S system is available (7). 

Chemical Properties. The notation used by Chemical Abstracts to reflect the configuration of tartaric acid is as follows (R-R, R )-tartaric acid [S7-69A-] (4) (S-R, R )-tartaric acid [147-71-7] (5) and y j O-tartaric acid [147-73-9] (6). Racemic acid is an equimolar mixture of the two optically active enantiomers and, hence, like the meso acid, is optically inactive. 

Chemical Properties. Although the chemical properties of the trivalent lanthanides are quite similar, some differences occur as a consequence of the lanthanide contraction (see Table 3). The chemical properties of yttrium are very similar too, on account of its external electronic stmcture and ionic radius. Yttrium and the lanthanides are typical hard acids, and bind preferably with hard bases such as oxygen-based ligands. Nevertheless they also bind with soft bases, typicaUy sulfur and nitrogen-based ligands in the absence of hard base ligands. 

Separation Processes. The product of ore digestion contains the rare earths in the same ratio as that in which they were originally present in the ore, with few exceptions, because of the similarity in chemical properties. The various processes for separating individual rare earth from naturally occurring rare-earth mixtures essentially utilize small differences in acidity resulting from the decrease in ionic radius from lanthanum to lutetium. The acidity differences influence the solubiUties of salts, the hydrolysis of cations, and the formation of complex species so as to allow separation by fractional crystallization, fractional precipitation, ion exchange, and solvent extraction. In addition, the existence of tetravalent and divalent species for cerium and europium, respectively, is useful because the chemical behavior of these ions is markedly different from that of the trivalent species. 

Reactions. The chemical properties of malonates are highlighted by the acidity of the methylene group (p-R 13) to such an extent that a... 

Reactions. The chemical properties of cyanoacetates ate quite similar to those of the malonates. The carbonyl activity of the ester function is increased by the cyano group s tendency to withdraw electrons. Therefore, amidation with ammonia [7664-41-7] to cyanoacetamide [107-91-5] (55) or with urea to cyanoacetylurea [448-98-2] (56) proceeds very easily. An interesting reaction of cyanoacetic acid is the Knoevenagel condensation with aldehydes followed by decarboxylation which leads to substituted acrylonitriles (57) such as (29), or with ketones followed by decarboxylation with a shift of the double bond to give P,y-unsaturated nitriles (58) such as (30) when cyclohexanone [108-94-1] is used. 

Chemical Properties. Molybdenum has good resistance to chemical attack by mineral acids, provided that oxidizing agents ate not present. The metal also offers excellent resistance to attack by several liquid metals. The approximate temperature limits for molybdenum to be considered for long-time service while in contact with various metals in the hquid state ate as follows ... 

---