Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Acetic acid chemistry

Acid—Base Chemistry. Acetic acid dissociates in water, pK = 4.76 at 25°C. It is a mild acid which can be used for analysis of bases too weak to detect in water (26). It readily neutralizes the ordinary hydroxides of the alkaU metals and the alkaline earths to form the corresponding acetates. When the cmde material pyroligneous acid is neutralized with limestone or magnesia the commercial acetate of lime or acetate of magnesia is obtained (7). Acetic acid accepts protons only from the strongest acids such as nitric acid and sulfuric acid. Other acids exhibit very powerful, superacid properties in acetic acid solutions and are thus useful catalysts for esterifications of olefins and alcohols (27). Nitrations conducted in acetic acid solvent are effected because of the formation of the nitronium ion, NO Hexamethylenetetramine [100-97-0] may be nitrated in acetic acid solvent to yield the explosive cycl o trim ethyl en etrin itram in e [121 -82-4] also known as cyclonit or RDX. [Pg.66]

The Eastman acetic anhydride [108-24-7] process provides an extension of carbonylation chemistry to carboxyUc acid esters. The process is based on technology developed independendy in the 1970s by Eastman and Halcon SD. The Eastman acetic anhydride process involves carbonylation of methyl acetate [79-20-9] produced from coal-derived methanol and acetic acid [64-19-7]. [Pg.166]

Many methods for the conversion of acid copolymers to ionomers have been described by Du Pont (27,28). The chemistry involved is simple when cations such as sodium or potassium are involved, but conditions must be controlled to obtain uniform products. Solutions of sodium hydroxide or methoxide can be fed to the acid copolymer melt, using a high shear device such as a two-roU mill to achieve uniformity. AH volatile by-products are easily removed during the conversion, which is mn at about 150°C. A continuous process has been described, using two extmders, the first designed to plasticate the feed polymer and mix it rapidly with the metal compound, eg, zinc oxide, at 160°C (28). Acetic acid is pumped into the melt to function as an activator. Volatiles are removed in an extraction-extmder which follows the reactor-extmder, and the anhydrous melt emerges through a die-plate as strands which are cut into pellets. [Pg.408]

Fig. 8. Basic chemistry of acetoxy-based RTV sihcones. The reactions for curing methoxy-based RTV sihcones are the same in that case, the methoxy group (OCH ) replaces acetoxy (OOCCH ), and methanol (CH OH), rather than acetic acid (CH COOH), is formed. Fig. 8. Basic chemistry of acetoxy-based RTV sihcones. The reactions for curing methoxy-based RTV sihcones are the same in that case, the methoxy group (OCH ) replaces acetoxy (OOCCH ), and methanol (CH OH), rather than acetic acid (CH COOH), is formed.
PZN-PT, and YBa2Cug02 g. For the preparation of PZT thin films, the most frequently used precursors have been lead acetate and 2irconium and titanium alkoxides, especially the propoxides. Short-chain alcohols, such as methanol and propanol, have been used most often as solvents, although there have been several successful investigations of the preparation of PZT films from the methoxyethanol solvent system. The use of acetic acid as a solvent and chemical modifier has also been reported. Whereas PZT thin films with exceUent ferroelectric properties have been prepared by sol-gel deposition, there has been relatively Httle effort directed toward understanding solution chemistry effects on thin-film properties. [Pg.346]

An important extension of these reactions is the Mannich reaction, in which aminomethyl-ation is achieved by the combination of formaldehyde, a secondary amine and acetic acid (Scheme 24). The intermediate immonium ion generated from formaldehyde, dimethyl-amine and acetic acid is not sufficiently reactive to aminomethylate furan, but it will form substitution products with alkylfurans. The Mannich reaction appears to be still more limited in its application to thiophene chemistry, although 2-aminomethylthiophene has been prepared by reaction of thiophene with formaldehyde and ammonium chloride. The use of A,iV-dimethyf (methylene) ammonium chloride (Me2N=CH2 CF) has been recommended for the iV,iV-dimethylaminomethylation of thiophenes (83S73). [Pg.55]

Pyridine hydrobromide perbromide (pyridinium bromide perbromide) [39416-48-3] M 319.9, m 130 (dec), 132-134 (dec). It is a very good brominating agent - liberating one mol. of Br2. Purified by recrystn from glacial acetic acid (33g from lOOmL of AcOH). [Fieser and Fieser Reagents for Organic Chemistry Vol 1 967 1967.]... [Pg.344]

Alternatively dissolve the salt (30g) in glacial acetic acid (200mL) by heating and filter. If crystals do not appear, the glass container should be rubbed with a glass rod to induce crystn which occurs within Ih. If not, allow to stand for a few days. Filter the cinnamon brown crystals which have a sliky lustre and dry over CaO. Keep away from moisture as it is decomposed by cold H2O. [Lux in Handbook of Preparative Inorganic Chemistry (Ed. Brauer) Vol II, p 1469 1963 Williams and Hunter Can J Chem 54 3830 1976.]... [Pg.438]

This chapter lists some representative examples of biochemicals and their origins, a brief indication of key techniques used in their purification, and literature references where further details may be found. Simpler low molecular weight compounds, particularly those that may have been prepared by chemical syntheses, e.g. acetic acid, glycine, will be found in Chapter 4. Only a small number of enzymes and proteins are included because of space limitations. The purification of some of the ones that have been included has been described only briefly. The reader is referred to comprehensive texts such as the Methods Enzymol (Academic Press) series which currently runs to more than 344 volumes and The Enzymes (3rd Edn, Academic Press) which runs to 22 volumes for methods of preparation and purification of proteins and enzymes. Leading referenees on proteins will be found in Advances in Protein Chemistry (59 volumes. Academic Press) and on enzymes will be found in Advances in Enzymology (72 volumes, then became Advances in Enzymology and Related Area of Molecular Biology, J Wiley Sons). The Annual Review of Biochemistry (Annual Review Inc. Patio Alto California) also is an excellent source of key references to the up-to-date information on known and new natural compounds, from small molecules, e.g. enzyme cofactors to proteins and nucleic acids. [Pg.504]

A WBL can also be formed within the silicone phase but near the surface and caused by insufficiently crosslinked adhesive. This may result from an interference of the cure chemistry by species on the surface of substrate. An example where incompatibility between the substrate and the cure system can exist is the moisture cure condensation system. Acetic acid is released during the cure, and for substrates like concrete, the acid may form water-soluble salts at the interface. These salts create a weak boundary layer that will induce failure on exposure to rain. The CDT of polyolefins illustrates the direct effect of surface pretreatment and subsequent formation of a WBL by degradation of the polymer surface [72,73]. [Pg.698]

Acetylated polysaccharides form part of the structure of wood, the acetyl radical constituting some 2-5Vo by weight of the dry wood. Hydrolysis to free acetic acid occurs in the presence of moisture at a rate varying from one species to another a wood of lower acetyl content can liberate acetic acid much faster under given conditions than another wood of higher content Small quantities of formic, propionic and butyric acids are also formed but their effects can be neglected in comparison with those of acetic acid. There is a broad, but only a broad, correlation between the corrosivity of a wood and its acidity. The chemistry of acetyl linkage in wood and of its hydrolysis has been examined in some detail. ... [Pg.967]

Compounds of special interest whose preparation is described include 1,2,3-benzothiadiazole 1,1-dioxide (a benzyne precursor under exceptionally mild conditions), bis(l,3-diphenylimida-zolidinylidene-2) (whose chemistry is quite remarkable), 6- di-melhylamino)julvene (a useful intermediate for fused-ring non-benzenoid aromatic compounds), dipkenylcyclopropenone (the synthesis of which is a milestone in theoretical organic chemistry), ketene di(2-melhoxyethyl) acetal (the easiest ketene acetal to prepare), 2-methylcyclopenlane-l,3-dione (a useful intermediate in steroid synthesis), and 2-phenyl-5-oxazolone (an important intermediate in amino acid chemistry). [Pg.145]

The atom economy for this process is 86.5% (100 X 116/134), which is reasonable. To calculate the E-factor and EMY further information is needed. From published literature (Vogel s Practical Organic Chemistry ), a standard procedure is to mix butanol (37 g) with glacial acetic acid (60 g), and a small amount of sulfuric acid catalyst (ignored in all calculations). Following completion of the reaction the mixture is added to water (250 g). The crude ester is washed further with water (100 g), then saturated sodium bicarbonate solution (25 g) and finally water (25 g). After drying over 5 g of anhydrous sodium sulfate the crude ester is distilled to give product (40 g) in a yield of 69%. [Pg.45]

The commercial process for the production of vinyl acetate monomer (VAM) has evolved over the years. In the 1930s, Wacker developed a process based upon the gas-phase conversion of acetylene and acetic acid over a zinc acetate carbon-supported catalyst. This chemistry and process eventually gave way in the late 1960s to a more economically favorable gas-phase conversion of ethylene and acetic acid over a palladium-based silica-supported catalyst. Today, most of the world s vinyl acetate is derived from the ethylene-based process. The end uses of vinyl acetate are diverse and range from die protective laminate film used in automotive safety glass to polymer-based paints and adhesives. [Pg.191]

The chemistry of vinyl acetate synthesis from the gas-phase oxidative coupling of acetic acid with ethylene has been shown to be facilitated by many co-catalysts. Since the inception of the ethylene-based homogeneous liquid-phase process by Moiseev et al. (1960), the active c ytic species in both the liquid and gas-phase process has always been seen to be some form of palladium acetate [Nakamura et al, 1971 Augustine and Blitz, 1993]. Many co-catalysts which help to enhance the productivity or selectivity of the catalyst have appeared in the literature over the years. The most notable promoters being gold (Au) [Sennewald et al., 1971 Bissot, 1977], cadmium acetate (Cd(OAc)j) [Hoechst, 1967], and potassium acetate (KOAc) [Sennewald et al., 1971 Bissot, 1977]. [Pg.191]


See other pages where Acetic acid chemistry is mentioned: [Pg.524]    [Pg.524]    [Pg.658]    [Pg.117]    [Pg.159]    [Pg.258]    [Pg.1]    [Pg.4]    [Pg.27]    [Pg.55]    [Pg.142]    [Pg.375]    [Pg.393]    [Pg.332]    [Pg.44]    [Pg.168]    [Pg.293]    [Pg.507]    [Pg.653]    [Pg.223]    [Pg.52]    [Pg.675]    [Pg.50]    [Pg.220]    [Pg.114]    [Pg.518]    [Pg.55]    [Pg.1506]    [Pg.35]    [Pg.231]    [Pg.3]    [Pg.308]    [Pg.191]    [Pg.192]    [Pg.199]   
See also in sourсe #XX -- [ Pg.16 ]

See also in sourсe #XX -- [ Pg.236 , Pg.237 ]




SEARCH



Acetic acid, trifluoro-, anhydride applications of, in carbohydrate chemistry

Acetic acid, trifluoro-, anhydride chemistry

Indole-3-acetic acid chemistry

© 2024 chempedia.info