Titanium -alkoxide

Numerous modifications of chromium-based catalysts have been made through the introduction of various additives, the most effective of which are titanium alkoxides (38,39). These additives apparentiy reduce surface silyl chromate moieties to chromium titanates, which are then oxidized to titanyl chromates. These catalysts offer a better control of the resin molecular weight (39). 

Titanium Alkoxides. Titanium alkoxides are made from titanium tetrachloride and the corresponding alcohols in the presence of ammonia. Higher titanium alkoxides are manufactured from lower alkoxides by alcoholysis. Titanium isopropoxide and -butoxide are commercially available in barrels. Annual production of titanium alkoxides is estimated at 3000—4000 metric tons at an average price of about 4/kg. 

Titanium alkoxides are used for the hardening and cross-linking of epoxy, siUcon, urea, melamine, and terephthalate resins in the manufacture of noncorrodable, high temperature lacquers in the sol-gel process as water repellents and adhesive agents (especially with foils) to improve glass surfaces as catalyst in olefin polymeri2ation, and for condensation and esterification. 

W. Lacourse andS. Kim, Use of Mixed Titanium Alkoxides for Sol-Gel Process, Wiiey-ln.tetscien.ee,New York, 1986, pp. 285—303. 

Sdanediols, eg, (CgH )2Si(OH)2 and H0Si(CgH )20Si(CgH )20H, yield four-and-six-membered rings with titanium alkoxides. Pinacols and 1,2-diols form chelates rather than polymers. The more branched the diol molecule, the more likely are its titanium derivatives to be soluble and even monomeric. 

P-Diketone Chelates. P-Diketones, reacting as enols, readily form chelates with titanium alkoxides, Hberating in the process one mole of an alcohol. TYZOR AA [17927-72-9] (6) is the product mixture from TYZOR TPT and two moles of acetylacetone (acac) reacting in the enol form. The isopropyl alcohol is left in the product (87). The dotted bonds of stmcture (6) indicate electron... 

Zinc chloride is a Lewis acid catalyst that promotes cellulose esterification. However, because of the large quantities required, this type of catalyst would be uneconomical for commercial use. Other compounds such as titanium alkoxides, eg, tetrabutoxytitanium (80), sulfate salts containing cadmium, aluminum, and ammonium ions (81), sulfamic acid, and ammonium sulfate (82) have been reported as catalysts for cellulose acetate production. In general, they require reaction temperatures above 50°C for complete esterification. Relatively small amounts (<0.5%) of sulfuric acid combined with phosphoric acid (83), sulfonic acids, eg, methanesulfonic, or alkyl phosphites (84) have been reported as good acetylation catalysts, especially at reaction temperatures above 90°C. 

PZN-PT, and YBa2Cug02 g. For the preparation of PZT thin films, the most frequently used precursors have been lead acetate and 2irconium and titanium alkoxides, especially the propoxides. Short-chain alcohols, such as methanol and propanol, have been used most often as solvents, although there have been several successful investigations of the preparation of PZT films from the methoxyethanol solvent system. The use of acetic acid as a solvent and chemical modifier has also been reported. Whereas PZT thin films with exceUent ferroelectric properties have been prepared by sol-gel deposition, there has been relatively Httle effort directed toward understanding solution chemistry effects on thin-film properties. 

Sol-gel primers use inorganic or metal-organic precursors (generally aluminum, silicon or titanium alkoxides) whose chemistry is closely related to the silane coupling agents discussed previously. These precursors are dissolved in alcohol, then hydrolyzed by the addition of water ... 

Titanium, tetrakis(trimethysilyl)oxy-, 3, 334 Titanium, tetranitrato-stereochemistry, 1,94 Titanium, triaquabis(oxalato)-structure, I, 78 Titanium, tris(acetylacetone)-structurc, 1,65 Titanium alkoxides oligomeric structure, 2,346 synthesis ammonia, 2, 338 Titanium chloride photographic developer, 6,99 Titanium complexes acetylacetone dinuclear, 2, 372 alkyl... 

Mn(II) > Mg(II).270 It should be underlined that titanium and zirconium alkoxides are efficient catalysts for both stages of reaction. Lanthanide compounds such as 2,2/-bipyridyl, acetylacetonate, and o-formyl phenolate complexes of Eu(III), La(III), Sm(III), Er(III), and Tb(III) appear to be even more efficient than titanium alkoxides, Ca or Mn acetates, Sb203, and their mixtures.273 Moreover, PET produced with lanthanides has been reported to exhibit better thermal and hydrolytic stability as compared to PET synthesized with the conventional Ca acetate -Sb203 catalytic system.273... 

MOCVD of Titania. Ti02 is often produced by the pyrolysis of a titanium alkoxide, such as titanium ethoxide, Ti(OC2H5)4, in an oxygen and helium atmosphere at 450°C. Another reaction is based on titanium tetraisopropoxide, Ti(OC3H-7)4, with oxygen at 300°C and at low pressure (< 1 Torr).P ]P ] These precursors have low boiling point (ca. 120°C). 

Tridentate amido-amidinate ligands have also been constructed starting from (lR,2R)-diaminocyclohexane (cf. Section IV.D). Scheme 181 illustrates the use of such ligand in the preparation of novel amidinato-titanium alkoxide com-plexes. ... 

Allylic alcohols can be converted to epoxy-alcohols with tert-butylhydroperoxide on molecular sieves, or with peroxy acids. Epoxidation of allylic alcohols can also be done with high enantioselectivity. In the Sharpless asymmetric epoxidation,allylic alcohols are converted to optically active epoxides in better than 90% ee, by treatment with r-BuOOH, titanium tetraisopropoxide and optically active diethyl tartrate. The Ti(OCHMe2)4 and diethyl tartrate can be present in catalytic amounts (15-lOmol %) if molecular sieves are present. Polymer-supported catalysts have also been reported. Since both (-t-) and ( —) diethyl tartrate are readily available, and the reaction is stereospecific, either enantiomer of the product can be prepared. The method has been successful for a wide range of primary allylic alcohols, where the double bond is mono-, di-, tri-, and tetrasubstituted. This procedure, in which an optically active catalyst is used to induce asymmetry, has proved to be one of the most important methods of asymmetric synthesis, and has been used to prepare a large number of optically active natural products and other compounds. The mechanism of the Sharpless epoxidation is believed to involve attack on the substrate by a compound formed from the titanium alkoxide and the diethyl tartrate to produce a complex that also contains the substrate and the r-BuOOH. ... 

Scheme 5-26 Titanium alkoxide-catalyzed asymmetric hydrophosphonylation of arylaldehydes...

Scheme 5-31 Titanium alkoxide-catalyzed asymmetric hydrophos-phonylation of cinnamaldehyde...

The same group extended this work to a cyclic imine (Scheme 5-47) better results were obtained with heterobimetallic lanthanide catalysts than with chiral titanium alkoxides. 

Scheme 5-47 Asymmetric hydrophosphonylation of a cyclic imine catalyzed by heterobimetallic rare earth/alkali metal/BI-NOL complexes or by chiral titanium alkoxide complexes...

The synthesis of Ti-Si-TUD-1 is analogous to the silica version a portion of the reactant is a titanium alkoxide, such as titanium (IV) n-butoxide. One of the early comparative catalytic tests of TUD-1 versus MCM-41 was for cyclohexene epoxidation. 

In mixtures of nonpolar solvents with little water, surfactants form spherical reverse micelles. They have a reversed orientation of the molecules with the hydrophilic groups in the interior and a drop of enclosed water in the middle. Starting from a precursor material, metal oxides in the form of uniform nanosized spheres can be obtained by hydrolysis under controlled conditions (pH, concentration, temperature). For example, titanium oxide spheres are obtained from a titanium alkoxide, Ti(OR)4 + 2 H20 —t Ti02 + 4 ROH. 

---