Water carbonyls

On the other hand, rare-earth trifluoromethanesulfonates (rare earth triflate, RE(OTf)3) have been found to work efficiently as Lewis acids even in aqueous media or in the presence of amines [4], A catalytic amount of RE(OTf)3 enables several synthetically useful reactions, for example aldol, Michael, allylation, Mannich, Diels-Alder reactions, etc., to proceed. It has also been demonstrated that a small amount of RE(OTf)3 is enough to complete the reactions and that RE(OTf)3 can easily be recovered from the reaction mixture and can be reused. A key to accomplishing the catalytic processes was assumed to be the equilibrium between Lewis acids and Lewis bases, for example water, carbonyl compounds, and amines, etc. A similar equilibrium was expected between Lewis adds and aromatic ketones, and, thus, RE(OTf)3-catalyzed Friedel-Crafts acylation was investigated [5]. 

An analogous process has been developed for unbranched aldehydes which can be transformed into a-amino ketones when oxidized in the presence of an secondary amine and iodine, as the mediator, in aqueous terf-butanol. The actual reactive species is probably the enamine which is attacked by iodine cations and subsequently by water. Carbonyl transposition reaction releases iodine anions which can be anodically reoxidized [197]. 

Theoretical and experimental studies on the PP II structure showed that in an aqueous environment, water molecules form carbonyl-water-carbonyl H-bonds within the chain [117-119], which seems to be the driving force for favoring the trans conformation. Interchain water bridges in PP II are not possible because carbonyls in the PP II helix are sterically quite crowded by the neighboring atoms [120], The carbonyl-water-carbonyl clusters cannot be formed when the peptide adopts the PP I conformation. This explains why the PP I structure can be formed in hydrophobic solvents where this effect is negated. The PP I conformation has not yet been found in protein structures. 

The preceding test was repeated with 20 g of Jamaican red mud catalyst replacing the red bauxite at 420 °C. The results in Figure 3 indicate that up to 20% water vapor slightly inhibited the sulfur dioxide conversion on this iron-rich catalyst. In absence of water, carbonyl sulfide was formed (curve a), but with water, hydrogen sulfide (curve c) was formed instead. 

Another product resulting from DMS oxidation is methane sulfonic acid, CH3SO3H. Laboratory studies under near-atmospheric conditions have shown that the yield of SO2 is 90% and that of CH3SO3H about 10%. The pathway leading to CH3 SO3H is not yet established, however. The CH3SO radical appears to be an intermediate. Methane sulfonic acid is a component of the marine aerosol, and it also is present in marine cloud and rain waters. Carbonyl sulfide is another product resulting from... 

The Japanese word kagaku for chemistry can be interpreted as change-science. Space does not permit a comprehertsive, but orrly a representative, description of the reactions, changes, of nearly all the elements and their simpler compounds, primarily inorganic ones and primarily in water. Carbonyl complexes, for example, are very far from comprehensively mentioned here. 

CO. Alkynes will react with carbon monoxide in the presence of a metal carbonyl (e.g. Ni(CO)4) and water to give prop>enoic acids (R-CH = CH-C02H), with alcohols (R OH) to give propenoic esters, RCH CHC02R and with amines (R NH2) to give propenoic amides RCHrCHCONHR. Using alternative catalysts, e.g. Fe(CO)5, alkynes and carbon monoxide will produce cyclopentadienones or hydroquinols. A commercially important variation of this reaction is hydroformyiation (the 0x0 reaction ). 

NaOCHjCHa. White solid (Na in EtOH). Decomposed by water, gives ethers with alkyl halides reacts with esters. Used in organic syntheses particularly as a base to remove protons adjacent to carbonyl or sulphonyl groups to give resonance-stabilized anions. 

The tetrafluorides of the elements can be prepared. They are all less stable than the corresponding hexafluorides and are hydrolysed readily by water. They can all be used as fluorinating agents and sulphur tetrafluoride is extensively used for this purpose, for example the fluorination of organic carbonyl groups ... 

Fig. 1. The rate-determining step in the neutral hydrolysis of paramethoxy-phenyl dichloroacetate. In the reactant state (a) a water molecule is in proximity of the carbonyl carbon after concerted proton transfer to a second water molecule and electron redistribution, a tetrahedral intermediate (b) is formed.

Reagent A is particularly useful for the treatment of the lower aliphatic aldehydes and ketones which are soluble in water cf. acetaldehyde, p. 342 acetone, p. 346). The Recent is a very dilute solution of the dinitrophenylhydrazine, and therefore is used more to detect the presence of a carbonyl group in a compound than to isolate sufficient of the hydrazone for effective recrystallisation and melting-point determination. 

The role of the base is apparently primarily that of a proton remover from the reactive methylene group thus if B represents the base, reaction (i) gives the carbanion, which then combines with the positive carbon of the carbonyl group (reaction ii) the product regains a proton from the piperidinium ion, and then by loss of water followed by mono-decarboxylation of the malonic acid residue gives the final acid. 

For the preparation of 2 4-dinitrophenylhydrazones, dissolve the carbonyl compound (say, 0-5 g.) in 5 ml. of ethanol and add the cal culated volume of the reagent. If a precipitate does not form immediately, dilute with a little water. Collect the derivative and recrystalhse it as above. 

When semicarbazide Ls heated in the absence of a carbonyl compound for long periods, condensation to blurea, NHjCONHNHCONHj, m.p. 247-250 (decomp.), may result occasionally this substance may be produced in the normal preparation of a semicarbazone that forms slowly. Biurea is sparingly soluble in alcohol and soluble in hot water, whereas semicarbazones with melting points in the same range are insoluble in water this enables it to be readily distinguished from a semicarbazone. 

In a Lewis-acid catalysed Diels-Alder reaction, the first step is coordination of the catalyst to a Lewis-basic site of the reactant. In a typical catalysed Diels-Alder reaction, the carbonyl oxygen of the dienophile coordinates to the Lewis acid. The most common solvents for these processes are inert apolar liquids such as dichloromethane or benzene. Protic solvents, and water in particular, are avoided because of their strong interactions wifti the catalyst and the reacting system. Interestingly, for other catalysed reactions such as hydroformylations the same solvents do not give problems. This paradox is a result of the difference in hardness of the reactants and the catalyst involved... 

Furthermore, the number of diene - dienoplrile combinations that can be expected to undergo a Lewis-acid catalysed Diels-Alder reaction is limited. Studies by Wijnen leave little doubt that the rate of typical Diels-Alder reactions, where the dienophile is activated by one or more carbonyl functionalities, does not respond to the presence of Lewis acids in aqueous solution , at least not beyond the extent that is expected for non-specific interactions (salt effects). No coordination of the Lewis acid to the dienophile was observed in these cases, which is perhaps not surprising. Water is... 

Finally, if there could be a way in which in water selective ri Jt-coordination to the carbonyl group of an a,P-imsatLirated ketone can be achieved, this would be a breakthrough, since it would subject monodentate reactants to catalysis by hard Lewis acids ". ... 

The rate of the Lewis-acid catalysed Diels-Alder reaction in water has been compared to that in other solvents. The results demonstrate that the expected beneficial effect of water on the Lewis-acid catalysed reaction is indeed present. However, the water-induced acceleration of the Lewis-add catalysed reaction is not as pronounced as the corresponding effect on the uncatalysed reaction. The two effects that underlie the beneficial influence of water on the uncatalysed Diels-Alder reaction, enforced hydrophobic interactions and enhanced hydrogen bonding of water to the carbonyl moiety of 1 in the activated complex, are likely to be diminished in the Lewis-acid catalysed process. Upon coordination of the Lewis-acid catalyst to the carbonyl group of the dienophile, the catalyst takes over from the hydrogen bonds an important part of the activating influence. Also the influence of enforced hydrophobic interactions is expected to be significantly reduced in the Lewis-acid catalysed Diels-Alder reaction. Obviously, the presence of the hydrophilic Lewis-acid diminished the nonpolar character of 1 in the initial state. 

The general theory behind the process is that the hypohalite will convert the amide to a haloamide. This then spontaneously changes to the isocyanate when heated and decomposes to the amine from the water present. In effect, all that happens is that a Carbonyl (CO) group is stripped off the starting amide to yield the corresponding amine. Yields pre- purification are around 80%, post-purification average around 65%. Certain uses of the result-... 

Terminal alkyne anions are popular reagents for the acyl anion synthons (RCHjCO"). If this nucleophile is added to aldehydes or ketones, the triple bond remains. This can be con verted to an alkynemercury(II) complex with mercuric salts and is hydrated with water or acids to form ketones (M.M.T. Khan, 1974). The more substituted carbon atom of the al-kynes is converted preferentially into a carbonyl group. Highly substituted a-hydroxyketones are available by this method (J.A. Katzenellenbogen, 1973). Acetylene itself can react with two molecules of an aldehyde or a ketone (V. jager, 1977). Hydration then leads to 1,4-dihydroxy-2-butanones. The 1,4-diols tend to condense to tetrahydrofuran derivatives in the presence of acids. 

The most commonly used protected derivatives of aldehydes and ketones are 1,3-dioxolanes and 1,3-oxathiolanes. They are obtained from the carbonyl compounds and 1,2-ethanediol or 2-mercaptoethanol, respectively, in aprotic solvents and in the presence of catalysts, e.g. BF, (L.F. Fieser, 1954 G.E. Wilson, Jr., 1968), and water scavengers, e.g. orthoesters (P. Doyle. 1965). Acid-catalyzed exchange dioxolanation with dioxolanes of low boiling ketones, e.g. acetone, which are distilled during the reaction, can also be applied (H. J. Dauben, Jr., 1954). Selective monoketalization of diketones is often used with good success (C. Mercier, 1973). Even from diketones with two keto groups of very similar reactivity monoketals may be obtained by repeated acid-catalyzed equilibration (W.S. Johnson, 1962 A.G. Hortmann, 1969). Most aldehydes are easily converted into acetals. The ketalization of ketones is more difficult for sterical reasons and often requires long reaction times at elevated temperatures. a, -Unsaturated ketones react more slowly than saturated ketones. 2-Mercaptoethanol is more reactive than 1,2-ethanediol (J. Romo, 1951 C. Djerassi, 1952 G.E. Wilson, Jr., 1968). 

The carbonylation of COD PdCl2 complex in aqueous sodium acetate produces /rui7x-2-hydroxy-5-cyclooctenecarboxylic acid /i-lactone (240). The lactone is obtained in 79% yield directly by the carbonylation of the COD complex in aqueous sodium acetate solution[220]. /i-Propiolactone (241) is obtained in 72% yield by the reaction of the PdCC complex of ethylene with CO and water in MeCN at —20 " C. /3-Propiolactone synthesis can be carried out with a catalytic amount of PdCC and a stoichiometric amount of CuCl2[221]. 

---