Triphenylphosphine palladium

Tetrakis(triphenylphosphine) palladium [14221-01-3] M 1155.58, m 100-105"(dec). Yellow crystals from EtOH. It is stable in air only for a short time, and prolonged exposure turns its colour to orange. Store in an inert atmosphere below room temp in the dark. [7 Chem Soc 1186 1957.]... 

Treatment of 4-arylamino-8-iodoquinoline 268 with propargyl alcohol in presence of iodo(phenyl)bis(triphenylphosphine) palladium and copper (I)iodide afforded 269 which upon catalytic reduction using Linder s catalyst gave 4//-pyrrolo[3,2,l-(/]quinoline 270 (97H2395) (Scheme 48). 

A variety of catalysts, solvents and amines as base can be employed for the Sonogashira reaction. Typical conditions are, e.g. tetrakis(triphenylphosphine)palladium(0)... 

In the presence of triphenylphosphine and four equivalents of chloride, (1-butyl-3-methylimida2olylidene)bis(triphenylphosphine)palladium(II) chloride is formed (Scheme 6.1-4). 

A synthetically useful virtue of enol triflates is that they are amenable to palladium-catalyzed carbon-carbon bond-forming reactions under mild conditions. When a solution of enol triflate 21 and tetrakis(triphenylphosphine)palladium(o) in benzene is treated with a mixture of terminal alkyne 17, n-propylamine, and cuprous iodide,17 intermediate 22 is formed in 76-84% yield. Although a partial hydrogenation of the alkyne in 22 could conceivably secure the formation of the cis C1-C2 olefin, a chemoselective hydrobora-tion/protonation sequence was found to be a much more reliable and suitable alternative. Thus, sequential hydroboration of the alkyne 22 with dicyclohexylborane, protonolysis, oxidative workup, and hydrolysis of the oxabicyclo[2.2.2]octyl ester protecting group gives dienic carboxylic acid 15 in a yield of 86% from 22. 

During the course of an elegant synthesis of the multifunctional FR-900482 molecule [( )-43, Scheme 9], the Danishefsky group accomplished the assembly of tetracycle 42 using an intramolecular Heck arylation as a key step.24 In the crucial C-C bond forming reaction, exposure of aryl iodide 41 to a catalytic amount of tetra-kis(triphenylphosphine)palladium(o) and triethylamine in acetonitrile at 80 °C effects the desired Heck arylation, affording 42 in an excellent yield of 93 %. The impressive success of this cyclization reaction is noteworthy in view of the potentially sensitive functionality contained within 41. 

In the direct coupling reaction (Scheme 30), it is presumed that a coordinatively unsaturated 14-electron palladium(o) complex such as bis(triphenylphosphine)palladium(o) serves as the catalytically active species. An oxidative addition of the organic electrophile, RX, to the palladium catalyst generates a 16-electron palladium(n) complex A, which then participates in a transmetalation with the organotin reagent (see A—>B). After facile trans- cis isomerization (see B— C), a reductive elimination releases the primary organic product D and regenerates the catalytically active palladium ) complex. 

Allylic acetates of either geranyl acetate or neryl acetate reacted with the sodium salt of methyl phenylsulfonyl acetate in the presence of tetrakis(triphenylphosphine palladium) affording the corresponding olefin, with a retained geometry at the primary carbon... 

Tetrakis(tripheiiylphosphine)palladium(0) is often used for this reaction. However, Pd(II) complexes such as bis(triphenylphosphine)palladium dichloride or palladium acetate are also commonly employed for convenience, as they are stable in ah. The base is typically a secondary or tertiary amine such as triethy-lamine. Weak bases such as sodium (potassium) acetate, bicarbonate, or carbonate are also used. 

Tetraalkylammonium hydroxides, 405 Tetrabutoxytitanium, 70 Tetrabutyltin, 68 Tetraethoxysilane (TEOS), 348 Tetrahydrofuran (THF), 348 Tetrakis(triphenylphosphine)palladium(0), 486... 

Alkenylboranes (R2C=CHBZ2 Z — various groups) couple in high yields with vinylic, alkynyl, aryl, benzylic, and allylic halides in the presence of tetra-kis(triphenylphosphine)palladium, Pd(PPh3)4, and a base to give R C CHR. 9-Alkyl-9-BBN compounds (p. 1013) also couple with vinylic and aryl halides " as well as with a-halo ketones, nitriles, and esters.Aryl halides couple with ArB(IR2 ) species with a palladium catalyst. ... 

Benzy 1-6-chloropurine reacts with tetrakis(triphenylphosphine)palladium in DCE to give, not only the 6-purinylpalladium(Il) complex 102, but a dinuclear complex 103. Using Stille coupling (RSnBus) only the 6-substituted purine is obtained <96ACS462>. 

In 1988, Linstrumelle and Huynh used an all-palladium route to construct PAM 4 [21]. Reaction of 1,2-dibromobenzene with 2-methyl-3-butyn-2-ol in triethylamine at 60 °C afforded the monosubstituted product in 63 % yield along with 3% of the disubstituted material (Scheme 6). Alcohol 15 was then treated with aqueous sodium hydroxide and tetrakis(triphenylphosphine)palladium-copper(I) iodide catalysts under phase-transfer conditions, generating the terminal phenylacetylene in situ, which cyclotrimerized in 36% yield. Although there was no mention of the formation of higher cyclooligomers, it is likely that this reaction did produce these larger species, as is typically seen in Stephens-Castro coupling reactions [22]. 

The Suzuki-Miyaura synthesis is one of the most commonly used methods for the formation of carbon-to-carbon bonds [7]. As a palladium catalyst typically tetrakis(triphenylphosphine)palladium(0) has been used, giving yields of44—78%. Recently, Suzuki coupling between aryl halides and phenylboronic acid with efficient catalysis by palladacycles was reported to give yields of 83%. 

Bromobenzaldehyde and 4-fluorophenylboronic acid were coupled in DMF using tetrakis(triphenylphosphine)palladium(0) as catalyst [85] (see a more extended description in [42]). 

Nucleophilic Substitution of xi-Allyl Palladium Complexes. TT-Allyl palladium species are subject to a number of useful reactions that result in allylation of nucleophiles.114 The reaction can be applied to carbon-carbon bond formation using relatively stable carbanions, such as those derived from malonate esters and (3-sulfonyl esters.115 The TT-allyl complexes are usually generated in situ by reaction of an allylic acetate with a catalytic amount of fefrafcz s-(triphenylphosphine)palladium... 

Palladium (II) chloride and ferric (III) chloride were purchased from Sigma Chemicals Co. Cerium(III) nitrate from Pfaltz Bauer, Inc. y-Al203 (100 m2/g) from Alfa Chemicals ethanol (HPLC grade) and nitrobenzene (Certified ACS) from Fisher Scientific. Bis(triphenylphosphine)palladium(II) dichloride was generously donated by Dr. Ivan J.B. Lin (National Dong Hwa University, Taiwan). All compounds were used without further treatment. Carbon monoxide (99.0%) was obtained from Praxair. 

Fehlhammer, W. P. et al., Z. Naturforsck, 1983, 38B, 547 In the first stage of the preparation of bis(triphenylphosphine)palladium(II) isothiocyanate, a large deficiency of aqueous palladium nitrate must be added with rapid stirring to an excess of sodium azidodithioformate solution to avoid the precipitation of explosive palladium(II) azidodithioformate. 

The synthesis of the second Stille coupling partner 34 was efficiently achieved in three steps. First, 2-bromojuglone (36) [28] was protected as its methoxymethyl ether (46, Scheme 3.7). The quinone was reduced using sodium thiosulfate, and the resulting hydroquinone was protected with methoxymethyl chloride to afford the arene 47. Finally, stannylation using tetrakis-(triphenylphosphine)palladium and hexabutylditin [29] afforded the cross-coupling partner 34 in high yield. 

C. 4-(3-Cyclohexenyl)-2-phenylthio-1-butene. To the above solution of the borane derivative, 0.809 g (0.700 mmol) of tetrakis(triphenylphosphine)palladium(0) (Note 9), 1.47 g (5.60 mmol) of triphenylphosphine (Note 10), 35 mL of 3 M potassium phosphate in water (Note 11), and finally 15.1 g (70.0 mmol) of 1-bromo-1-phenylthioethene are added and the resulting mixture is heated at reflux for 3 hr with stirring. The light brown solution is cooled to room temperature and treated with 6.4 g... 

Tetrakis(triphenylphosphine)palladium(0) Palladium, tetrakis(triphenylphosphine)-(8) Palladium, tetrakis(triphenylphosphine)-, (T-4)- (9) (14221-01-3) Triphenylphosphine Phosphine, thphenyl- (8,9) (603-35-0)... 

The palladium-catalyzed cross-coupling reaction featured in this procedure occurs under neutral conditions in the presence of many synthetically useful functional groups (e.g. alcohol, ester, nitro, acetal, ketone, and aldehyde). The reaction works best in N,N-dimethylformamide with bis(triphenylphosphine)palladium(ll) chloride, PdCI2(PPh3)2, as the catalyst. Lithium chloride is added to prevent decomposition of the catalyst.143 13 It is presumed that conversion of the intermediate aryl palladium triflate to an aryl palladium chloride is required for the transmetallation step to proceed.9... 

Tributyltin chloride Stannane, tributylchloro- (8,9) (1461-22-9) Bi (triphenylphosphine)palladium(ll) chloride Palladium, dichlorobis(1riphenylphosphine)- (8,9) (13965-03-2)... 

C. 4-Methoxy-4 -nitrobiphonyl (3). A dry, 500-mL, three-necked, round-bottomed flask equipped with a reflux condenser, magnetic stirring bar, nitrogen gas inlet, and rubber septum (Note 1) is charged sequentially with 300 mL of anhydrous N,N-dimethylformamide (Note 13), 15.0 g (55.4 mmol) of 4-nitrophenyl trifluoromethanesulfonate (1), 27.8 g (70.0 mmol) of tributyl(4-methoxyphenyl)stannane (2) (Note 14), 7.5 g of dry lithium chloride (Note 15), and 1.6 g (4 mol percent) of bis(triphenylphosphine)palladium(ll) chloride (Note 16). The rubber septum is replaced with a Teflon stopper and the yellow mixture is heated at 100-105°C for 2.5 hr. After approximately 20 min, the reaction turns dark brown. 

The readily prepared immobilized phosphoramidite could be used to efficiently synthesize oligodeoxyribonucleotides with modified thymidine residues. Whereas the effect of microwave irradiation on the deprotection by exposing the strand to tet-rakis-triphenylphosphine palladium(O) and diethylammonium bicarbonate was only small using dichloromethane as solvent, complete removal of the alloc group was achieved in N,N-dimethylformamide within 10 min at 80 °C (Scheme 7.30). After the reaction, the solid-supported product was washed with N,N-dimethylformamide and dichloromethane and dried, before being subjected to acylation. The coupling... 

---