Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Hydroperoxide, reactions tert-butyl

The first practical method for asymmetric epoxidation of primary and secondary allylic alcohols was developed by K.B. Sharpless in 1980 (T. Katsuki, 1980 K.B. Sharpless, 1983 A, B, 1986 see also D. Hoppe, 1982). Tartaric esters, e.g., DET and DIPT" ( = diethyl and diisopropyl ( + )- or (— )-tartrates), are applied as chiral auxiliaries, titanium tetrakis(2-pro-panolate) as a catalyst and tert-butyl hydroperoxide (= TBHP, Bu OOH) as the oxidant. If the reaction mixture is kept absolutely dry, catalytic amounts of the dialkyl tartrate-titanium(IV) complex are suflicient, which largely facilitates work-up procedures (Y. Gao, 1987). Depending on the tartrate enantiomer used, either one of the 2,3-epoxy alcohols may be obtained with high enantioselectivity. The titanium probably binds to the diol grouping of one tartrate molecule and to the hydroxy groups of the bulky hydroperoxide and of the allylic alcohol... [Pg.124]

The Sharpless-Katsuki asymmetric epoxidation reaction (most commonly referred by the discovering scientists as the AE reaction) is an efficient and highly selective method for the preparation of a wide variety of chiral epoxy alcohols. The AE reaction is comprised of four key components the substrate allylic alcohol, the titanium isopropoxide precatalyst, the chiral ligand diethyl tartrate, and the terminal oxidant tert-butyl hydroperoxide. The reaction protocol is straightforward and does not require any special handling techniques. The only requirement is that the reacting olefin contains an allylic alcohol. [Pg.50]

The parent indolo[2,3-fl]carbazole (1) has also been the subject of a study probing its reactivity toward oxidizing agents. One of the substrates involved, namely 85 (prepared from 1 and 2,5-dimethoxytetrahydrofuran in the presence of acid), was subjected to treatment with m-chloroperbenzoic acid, to give the dione 86 as the major product and a sensitive compound assigned the hydroxy structure 87. A cleaner reaction took place when 85 underwent oxidation with tert-butyl hydroperoxide assisted by VO(acac)2, to produce 86 exclusively in 86% yield. Likewise, A,N -dimethylindolo[2,3-fl]carbazole furnished the dione 88 on treatment with this combination of reagents (96J(X 413). [Pg.17]

In light of the previous discussions, it would be instructive to compare the behavior of enantiomerically pure allylic alcohol 12 in epoxidation reactions without and with the asymmetric titanium-tartrate catalyst (see Scheme 2). When 12 is exposed to the combined action of titanium tetraisopropoxide and tert-butyl hydroperoxide in the absence of the enantiomerically pure tartrate ligand, a 2.3 1 mixture of a- and /(-epoxy alcohol diastereoisomers is produced in favor of a-13. This ratio reflects the inherent diasteieo-facial preference of 12 (substrate-control) for a-attack. In a different experiment, it was found that SAE of achiral allylic alcohol 15 with the (+)-diethyl tartrate [(+)-DET] ligand produces a 99 1 mixture of /(- and a-epoxy alcohol enantiomers in favor of / -16 (98% ee). [Pg.296]

In a related reaction, primary aromatic amines have been oxidized to azo compounds by a variety of oxidizing agents, among them Mn02, lead tetraacetate, O2 and a base, barium permanganate, and sodium perborate in acetic acid, tert Butyl hydroperoxide has been used to oxidize certain primary amines to azoxy compounds. [Pg.1519]

A recent stndy (13,27) describes the use of Co-Si-TUD-1 for the liquid-phase oxidation of cyclohexane. Several other metals were tested as well. TBHP (tert-butyl hydroperoxide) was used as an oxidant and the reactions were carried out at 70°C. Oxidation of cyclohexane was carried out using 20 ml of a mixture of cyclohexane, 35mol% TBHP and 1 g of chlorobenzene as internal standard, in combination with the catalyst (0.1 mmol of active metal pretreated overnight at 180°C). Identification of the products was carried out using GC-MS. The concentration of carboxylic side products was determined by GC analysis from separate samples after conversion into the respective methyl esters. Evolution and consumption of molecular oxygen was monitored volumetrically with an attached gas burette. All mass balances were 92% or better. [Pg.374]

The activity of the FePeCli6-S/tert-butyl hydroperoxide (TBHP) catalytic system was studied under mild reaction conditions for the synthesis of three a,p-unsaturated ketones 2-cyclohexen-l-one, carvone and veibenone by allylic oxidation of cyclohexene, hmonene, and a-pinene, respectively. Substrate conversions were higher than 80% and ketone yields decreased in the following order cyclohexen-1-one (47%), verbenone (22%), and carvone (12%). The large amount of oxidized sites of monoterpenes, especially limonene, may be the reason for the lower ketone yield obtained with this substrate. Additional tests snggested that molecular oxygen can act as co-oxidant and alcohol oxidation is an intermediate step in ketone formation. [Pg.435]

The heterogeneous catalytic system iron phthalocyanine (7) immobilized on silica and tert-butyl hydroperoxide, TBHP, has been proposed for allylic oxidation reactions (10). This catalytic system has shown good activity in the oxidation of 2,3,6-trimethylphenol for the production of 1,4-trimethylbenzoquinone (yield > 80%), a vitamin E precursor (11), and in the oxidation of alkynes and propargylic alcohols to a,p-acetylenic ketones (yields > 60%) (12). A 43% yield of 2-cyclohexen-l-one was obtained (10) over the p-oxo dimeric form of iron tetrasulfophthalocyanine (7a) immobilized on silica using TBHP as oxidant and CH3CN as solvent however, the catalyst deactivated under reaction conditions. [Pg.436]

Basically, three reactions were evoked to support the occurrence of 5a-C-centered radicals 10 in tocopherol chemistry. The first one is the formation of 5a-substituted derivatives (8) in the reaction of a-tocopherol (1) with radicals and radical initiators. The most prominent example here is the reaction of 1 with dibenzoyl peroxide leading to 5a-a-tocopheryl benzoate (11) in fair yields,12 so that a typical radical recombination mechanism was postulated (Fig. 6.6). Similarly, low yields of 5a-alkoxy-a-tocopherols were obtained by oxidation of a-tocopherol with tert-butyl hydroperoxide or other peroxides in inert solvents containing various alcohols,23 24 although the involvement of 5 a-C-centered radicals in the formation mechanism was not evoked for explanation in these cases. [Pg.169]

From a study of the thermal stability of NOPP (formed by Y-irradiation of 02-free PPH + IbNO-) we have observed the regeneration of I5NO- for films stored in the dark, presumably by reaction 8. However only when tert.-butyl hydroperoxide was diffused into the film did we observe a relatively rapid genera-... [Pg.58]

Secondly, the interaction of hindered amines with hydroperoxides was examined. At room temperature, using different monofunctional model hydroperoxides, a direct hydroperoxide decomposition by TMP derivatives was not seen. On the other hand, a marked inhibitory effect of certain hindered amines on the formation of hydroperoxides in the induced photooxidation of hydrocarbons was observed. Additional spectroscopic and analytical evidence is given for complex formation between TMP derivatives and tert.-butyl hydroperoxide. From these results, a possible mechanism for the reaction between hindered amines and the oxidizing species was proposed. [Pg.65]

The complex formation between hydroperoxides and HALS derivatives proposed for the preceding reaction was recently postulated by two different groups of investigators. First, Carlsson determined a complex formation constant for +00H and a nitroxide on the basis of ESR measurements—. Secondly, Sedlar and his coworkers were able to isolate solid HALS-hydroperoxide complexes and characterize them by IR measurements. The accelerated thermal decomposition of hydroperoxides observed by us likewise points to complex formation. It is moreover known that amines accelerate the thermal decomposition of hydroperoxides-. Thus Denisov for example made use of this effect to calculate complex formation constants for tert.-butyl hydroperoxide and pyridineitZ.. [Pg.86]

Blatter, F., Sun, H. and Frei, H. (1996). Highly selective formation of tert-butyl hydroperoxide from the reaction of isobutane and 02 in a zeolite under visible light. Chem. Eur. J. 2, 385-389... [Pg.268]

Fig. 1. Formation of MeS(0)Tol, showing fitted (solid line) versus experimental data during the reaction of 33.9 mM MeSTol and 83 mM tert-butyl hydroperoxide in the presence of 0.31 mM MeReO(mtp)PPh3, 1. Reactions were conducted in benzene at 298 K. The experimental progress curve was modeled by a kinetics simulation routine that gave the optimum fit to data from six such experiments. Fig. 1. Formation of MeS(0)Tol, showing fitted (solid line) versus experimental data during the reaction of 33.9 mM MeSTol and 83 mM tert-butyl hydroperoxide in the presence of 0.31 mM MeReO(mtp)PPh3, 1. Reactions were conducted in benzene at 298 K. The experimental progress curve was modeled by a kinetics simulation routine that gave the optimum fit to data from six such experiments.
B. Oxygen Transfer from tert-butyl Hydroperoxide to Sulfoxides 1. Reactions Forming Sulfones... [Pg.182]

In 1980 a useful level of asymmetric induction in the epoxidation of some alkenes was reported by Katsuki and Sharpless121. The combination of titanium (IV) alkoxide, an enantiomerically pure tartrate ester and tert-butyl hydroperoxide was used to epoxidize a wide variety of allylic alcohols in good yield and enantiomeric excess (usually >90%). This reaction is now one of the most widely applied reactions in asymmetric synthesis131. [Pg.52]

After the mixture was cooled to —20 °C, titanium isopropoxide (297 pL) was added. The reaction mixture was stirred at —20 °C as a solution of tert-butyl hydroperoxide (5.5 M in Aooctane, 7.2 mL) was added via a syringe at a moderate rate (over 5 minutes). The mixture was stirred at —20 °C for 30 minutes. [Pg.79]

Olefin epoxidation is an important industrial domain. The general approach of SOMC in this large area was to understand better the elementary steps of this reaction catalyzed by silica-supported titanium complexes, to identify precisely reaction intermediates and to explain catalyst deachvahon and titanium lixiviation that take place in the industrial Shell SMPO (styrene monomer propylene oxide) process [73]. (=SiO) Ti(OCap)4 (OCap=OR, OSiRs, OR R = hydrocarbyl) supported on MCM-41 have been evaluated as catalysts for 1-octene epoxidation by tert-butyl hydroperoxide (TBHP). Initial activity, selechvity and chemical evolution have been followed. In all cases the major product is 1,2-epoxyoctane, the diol corresponding to hydrolysis never being detected. [Pg.113]

The gas phase enthalpy of reaction 6 for bis(hydroxymethyl) peroxide is — 192 kJ mol , which deviates from the other hydrate-producing peroxides by nearly 89 kJ mol . The enthalpy of reaction 8, 145 kJmol, is likewise discrepant by some 120 kJmol from that for diethyl peroxide, ca 26 kJ mol. From the high-level calculations reported in Reference 28, the reaction enthalpy for the addition of H2O2 to formaldehyde is —59 kJ mol. A similar reaction is equation 10 for the gas phase addition of tert-butyl hydroperoxide to a carbonyl group. [Pg.157]

The value is from the liquid phase enthalpy of reaction between cyclohexanone and tert-butyl hydroperoxide from V. L. Antonovskii, E. V. Federova, N. E. Shrivel and V. D. Emelin, Kinet. Ratal., 30, 1235 (1989). [Pg.168]

In 1989, a method for the peroxysilylation of alkenes nsing triethylsUane and oxygen was reported by Isayama and Mnkaiyama (eqnation 25). The reaction was catalyzed by several cobalt(II)-diketonato complexes. With the best catalyst Co(modp)2 [bis(l-morpholinocarbamoyl-4,4-dunethyl-l,3-pentanedionato)cobalt(n)] prodnct yields ranged between 75 and 99%. DiaUcyl peroxides can also be obtained starting from tertiary amines 87, amides 89 or lactams via selective oxidation in the a-position of the Af-fnnctional group with tert-butyl hydroperoxide in the presence of a ruthenium catalyst as presented by Murahashi and coworkers in 1988 ° (Scheme 38). With tertiary amines 87 as substrates the yields of the dialkyl peroxide products 88 ranged between 65 and 96%, while the amides 89 depicted in Scheme 38 are converted to the corresponding peroxides 90 in yields of 87% (R = Me) and 77% (R = Ph). [Pg.360]

The oxygen that is transferred to the allylic alcohol to form epoxide is derived from tert-butyl hydroperoxide. The enantioselectivity of the reaction results from a titanium complex among the reagents that includes the enantiomerically pure tartrate ester as one of the ligands. The choice whether to use (+) or (-) tartrate ester for stereochemical control depends on which enantiomer of epoxide is desired. [Pg.229]

Similar results were obtained for tert-butyl hydroperoxide and perchloric acid in 2-propanol. Thus, it is evident from the decomposition of hydrogen peroxide into free radicals that both heterolytic and homolytic reactions may be catalyzed by hydrogen ions. Further research is needed to investigate proton catalysis in certain homolytic reactions. [Pg.127]


See other pages where Hydroperoxide, reactions tert-butyl is mentioned: [Pg.434]    [Pg.666]    [Pg.326]    [Pg.694]    [Pg.1044]    [Pg.93]    [Pg.150]    [Pg.58]    [Pg.158]    [Pg.218]    [Pg.258]    [Pg.72]    [Pg.645]    [Pg.260]    [Pg.773]    [Pg.72]    [Pg.136]    [Pg.140]    [Pg.160]    [Pg.222]    [Pg.103]    [Pg.298]    [Pg.153]    [Pg.391]    [Pg.950]    [Pg.187]    [Pg.29]   


SEARCH



Butyl hydroperoxide

Hydroperoxidation reaction

Hydroperoxide, reactions

Hydroperoxides reactions

Hydroperoxides tert-butyl hydroperoxide

Tert-Butyl hydroperoxides

© 2024 chempedia.info