Temperature coefficient resistance

The acconunodation coefficient for Kr on a carbon filament is determined experimentally as follows. The electrically heated filament at temperature 72 is stretched down the center of a cylindrical cell containing Kr gas at 7. Gas molecules hitting the filament cool it, and to maintain its temperature a resistance heating of Q cal sec cm is needed. Derive from simple gas kinetic theory the expression... 

The development of active ceramic-polymer composites was undertaken for underwater hydrophones having hydrostatic piezoelectric coefficients larger than those of the commonly used lead zirconate titanate (PZT) ceramics (60—70). It has been demonstrated that certain composite hydrophone materials are two to three orders of magnitude more sensitive than PZT ceramics while satisfying such other requirements as pressure dependency of sensitivity. The idea of composite ferroelectrics has been extended to other appHcations such as ultrasonic transducers for acoustic imaging, thermistors having both negative and positive temperature coefficients of resistance, and active sound absorbers. 

Sheet Miea. Good quahty sheet mica is widely used for many iadustrial appHcations, particularly ia the electrical and electronic iadustries, because of its high dielectric strength, uniform dielectric constant, low power loss (high power factor), high electrical resistivity, and low temperature coefficient (Table 6). Mica also resists temperatures of 600—900°C, and can be easily machined iato strong parts of different si2es and shapes (1). 

In the microelectronics industry, powdered metals and insulating materials that consist of noimoble metals and oxides are deposited by screen printing in order to form coatings with high resistivities and low temperature coefficients of resistance. This technique may be useful in depositing oxide—metal refractory coatings. 

The electrical resistance of rhenium is about 3.5 times higher than tungsten at 20°C. However, the difference is reduced at higher temperatures because of rhenium s lower temperature coefficient, so that at 2500°C the resistivity of rhenium is only about 20% more than tungsten. The higher resistance at low temperature, combined with a lower temperature coefficient, contributes to rapid heating of a filament. 

Silver sulfide, when pure, conducts electricity like a metal of high specific resistance, yet it has a zero temperature coefficient. This metallic conduction is beheved to result from a few silver ions existing in the divalent state, and thus providing free electrons to transport current. The use of silver sulfide as a soHd electrolyte in batteries has been described (57). 

Resistivity. The temperature coefficient of electrical resistivity of commercial siUcon carbide at room temperature is negative. No data are given for refractory materials because resistivity is gready induenced by the manufacturing method and the amount and type of bond. Manufacturers should be consulted for specific product information. 

Typical positive temperature coefficient (PTC) device behavior for a doped polycrystaHine BaTiO thermistor is presented in Figure 4. At temperatures below - 100° C and above - 200° C the material shows the expected negative resistivity vs temperature associated with semiconductors as expressed by ... 

R. D. Roseman, Influence ofYttria and Zirconia on the Positive Temperature Coefficient of Resistance in Barium Titanate Ceramics, M.S. dissertation. University of Illinois, Urbana, Dl. 1991. 

Nonferrous alloys account for only about 2 wt % of the total chromium used ia the United States. Nonetheless, some of these appHcations are unique and constitute a vital role for chromium. Eor example, ia high temperature materials, chromium ia amounts of 15—30 wt % confers corrosion and oxidation resistance on the nickel-base and cobalt-base superaHoys used ia jet engines the familiar electrical resistance heating elements are made of Ni-Cr alloy and a variety of Ee-Ni and Ni-based alloys used ia a diverse array of appHcations, especially for nuclear reactors, depend on chromium for oxidation and corrosion resistance. Evaporated, amorphous, thin-film resistors based on Ni-Cr with A1 additions have the advantageous property of a near-2ero temperature coefficient of resistance (58). 

Electrical Properties at Low Temperatures The eleciiical resistivity of most pure metalhc elements at ambient and moderately low temperatures is approximately proportional to the absolute temperature. At very low temperatures, however, the resistivity (with the exception of superconductors) approaches a residual value almost independent of temperature. Alloys, on the other hand, have resistivities much higher than those of their constituent elements and resistance-temperature coefficients that are quite low. The electrical resistivity of alloys as a consequence is largely independent of temperature and may often be of the same magnitude as the room temperature value. 

More importantly, such alloys also possess a very low temperature coefficient of electrical resistance (of the order of 220 idQ.IQ.rC, typical), which causes only a marginal change in its resistance value with variation in temperature. They can therefore ensure a near-consistent predefined performance of the motor for which the resistance grid is designed, even after frequent starts and stops. They are also capable of absorbing shocks and vibrations during stringent service conditions and are therefore suitable for heavy-duty drives, such as steel mill applications. 

Possesses high specific resistance - 120 pH-cm and low temperature coefficient of 0.00022 Causes negligible... 

Figure 9.5(b) Approximate temperature coefficient of insulation resistance of rotating machines... 

The temperature coefficient curve is given in Figure 9.5(b). This is plotted on the assumption that the insulation resistance doubles for each I8°C reduction in temperature (above the dew point). 

---