Corrosion 80 Conference

Bemhardsson, S., Mellstrdm, R., and Brox, B., Limiting Chloride Contents and Temperatures with Regtird to Pitting of Stainless Steels." Paper 85, NACE CORROSION/80 Conference, Anaheim, CA, 1980. 

Cotton, J. B., Localised Corrosion 676 NACE International Corrosion Conference series NACE-3 (eds R. W. Stable, B. F. Brown, J. Kruger and A. Agrawal) (1974)... 

Vetters, A., Corrosion in Welds, Proc. Australian Corrosion Conference, Sydney (1979)... 

In addition to the above the annual corrosion conferences (NACE and UK Corrosion), usually sponsor sessions on corrosion monitoring which are reported in the respective proceedings. 

Frenier, Wayne E. (Hydrochem Industrial Services). 20 Years of Advances in Technology for Chemically Cleaning Industrial Equipment A Critical Review. Paper 338, presented at the NACE International Corrosion Conference, USA 1998. 

Rahim, A.A., Rocca, E., Steinmetz, J., Adnan, R. and Kassim, M.J., 2004, Mangrove tannins as corrosion inhibitors in acidic medium-Study of flavanoid monomers. In Proceedings of the European Corrosion Conference (EUROCORR 2004), 12-16 September, Nice, Paper No. 41. 

Googan, C.G. Proc. UK National Corrosion Conference, London, England, 1982, pp. 13-18. 

Honda, T. and Ohashi, K. (1990). A new approach for corrosion monitoring by a scanning acoustic microscope. Proceedings of the 11th Corrosion Conference, Florence. (In press.) [207]... 

Duby, P. In High Temperature Corrosion March 2-6. 1981. San Diego. California Rapp, R. A., Ed. National Association of Corrosion Engineers International Corrosion Conference Series, NACE-6, 1983 p. 353. 

Elhoud, A., Renton, N.C. Deans, W.F., Effect of surface roughness on pitting corrosion of 25 Cr duplex stainless steel in chloride solution. The 9th Libyan corrosion conference, Tripoli-Libya, 2007. 

W. J. Lorenz, F. Mansfeld in Corrosion Inhibition (Ed. R. H. Hausler), International Corrosion Conference Series, National Association of Corrosion Engineers, Houston, Tex., 1988, pp. 7-13. 

V Novokshehenov, Proceedings of the Fifth Middle East Corrosion Conference, Manama, Bahrain, pp. 209-223, Oct 28-30, 1991. 

G. Jones,]. Slater and R.W. Staehle (Eds.) High Temperature/ High Pressure Electrochemistry in Aqueous Solutions NACE, Intern. Corrosion Conference Series No.4. NACE, Houston, Tx, U.S.A., 1973. 

C.S. Kortovich, Corrosion fatigue of4340 andD6AC steels below lCiscc> h Proceedings fo the 1974 Tri-Service Corrosion Conference on Corrosion of Military Equipment, vol. 1, AFML-TR-75-42, 1975, Air Force Materials Laboratory Wright Patterson Air Force Base, pp. 283-303. 

FIGURE 4.5 Percentage of papers with an MIC topic as presented at national corrosion conferences (mainly sponsored by the Australian Corrosion Association [ACA]) over two decades in Australia. 

R.W. Lutey. The occnrrence and infinence of anaerobic hacteria in coohng water systems. Paper G-06, pp. 705-724, Proceedings of the 7th Middle East Corrosion Conference, Vol. 2, Manama-Bahrain, February 26-28, 1996. 

P. Smith, S. Roy, D. Swailes, S. Maxwell, D. Page, J. Lawson. A predictive model for MIC (microbial induced corrosion) in sub-sea production pipelines Part 1—Abiotic corrosion model. SPE 114135, 2008 SPE International Oilfield Corrosion Conference, Aberdeen, UK, May 27, 2008. 

VK. Chexal, J.S. Horowitz, D.P. Munson, K. Shye, C.S. Spalaris. Using predictive technology to control corrosion in raw cooling water systems. Paper IWC-97-84, Proceedings of the International Corrosion Conference, PA, 1997. 

Aberle, D., Agarwal, DC. 2008. High performance corrosion resistant stainless steels and nickel alloys for oil and gas applications. NACE—International Corrosion Conference Series, Corrosion 2008 New Orleans, LO March 16-20, 2008 Code 77054, pp. 080851-0808517. 

F. Presuel-Moreno, J.R Scully, and S.R Sharp, Literature review of commercially available alloys that have potential as low-cost corrosion resistant concrete reinforcement, NACE Corrosion Conference 2009, Atlanta, Georgia, Paper 09204, 2009. 

Eden, D. A., Rothwell, A. N. Dawson, J. L., Paper 444 in Proceedings of the Corrosion Conference, National Association of Corrosion Engineers, 1991. 

Domack, M. S., Stress Corrosion Evaluation of Powder Metallurgy Aluminum Alloy 7091 with the Breaking Load Test Method, Presented at the Tri-Service Corrosion Conference, Colorado Springs, CO, 5-7 May 1987, p. 21... 

Stegmann, D. W., Hausler, R. H., Cruz, C. I., and Sutanto, H., "Laboratory Studies on Flow Induced Localized Corrosion in CO2/H2S Enviroments, I. Development of Test Methodology," CORROSION/90, NACE Annual Corrosion Conference, Paper No. 5, 1990. 

Efird, K. D., "Jet Impingement Testing for Flow Accelerated Corrosion, CORROSION/2000, NACE Annual Corrosion Conference, 2000, Paper No. 2000. 

---