Surfactant , multiple

Phospholipids and sphingolipids are involved in several disease processes, including respiratory distress syndrome (lack of lung surfactant), multiple sclerosis... 

The adsorbed layer at G—L or S—L surfaces ia practical surfactant systems may have a complex composition. The adsorbed molecules or ions may be close-packed forming almost a condensed film with solvent molecules virtually excluded from the surface, or widely spaced and behave somewhat like a two-dimensional gas. The adsorbed film may be multilayer rather than monolayer. Counterions are sometimes present with the surfactant ia the adsorbed layer. Mixed moaolayers are known that iavolve molecular complexes, eg, oae-to-oae complexes of fatty alcohol sulfates with fatty alcohols (10), as well as complexes betweea fatty acids and fatty acid soaps (11). Competitive or preferential adsorption between multiple solutes at G—L and L—L iaterfaces is an important effect ia foaming, foam stabiLizatioa, and defoaming (see Defoamers). 

The ml of solution (10 g/L as anhydrous CaCl2 or MgS04) used to produce turbidity when added to 50 ml surfactant solution (at 10 g/L), multipled by 2. bLaboratory-prepared samples. cCommercial samples. 

From surfactant molecules it is known that the repeated vertical dipping of a substrate through a floating monolayer of these molecules leads to the formation of an LB multilayer on the substrate. In principle, the same procedure should also allow the preparation of multilayers of latex particles. In Figure 8b, the preparation of a particle bilayer is schematically indicated multiple repetition should result in the formation of an LB multilayer of particles. However, if one tries to realize this concept, one immediately gets into difficulties, because the contact of the particles with the underlying substrate is very poor, and the already deposited particle layer tends to detach from the surface when the substrate is dipped into... 

The main peculiarity of solutions of reversed micelles is their ability to solubilize a wide class of ionic, polar, apolar, and amphiphilic substances. This is because in these systems a multiplicity of domains coexist apolar bulk solvent, the oriented alkyl chains of the surfactant, and the hydrophilic head group region of the reversed micelles. Ionic and polar substances are hosted in the micellar core, apolar substances are solubilized in the bulk apolar solvent, whereas amphiphilic substances are partitioned between the bulk apolar solvent and the domain comprising the alkyl chains and the surfactant polar heads, i.e., the so-called palisade layer [24],... 

Micellar flooding is a promising tertiary oil-recovery method, perhaps the only method that has been shown to be successful in the field for depleted light oil reservoirs. As a tertiary recovery method, the micellar flooding process has desirable features of several chemical methods (e.g., miscible-type displacement) and is less susceptible to some of the drawbacks of chemical methods, such as adsorption. It has been shown that a suitable preflush can considerably curtail the surfactant loss to the rock matrix. In addition, the use of multiple micellar solutions, selected on the basis of phase behavior, can increase oil recovery with respect to the amount of surfactant, in comparison with a single solution. Laboratory tests showed that oil recovery-to-slug volume ratios as high as 15 can be achieved [439]. 

M. Dahanayake, J. Li, R. L. Reierson, and D. J. Tracy. Amphoteric surfactants having multiple hydrophobic and hydrophilic groups. Patent EP 697244, 1996. 

In reality, many proteins demonstrate mixed mode interactions (e.g., additional hydrophobic or silanol interactions) with a column, or multiple structural conformations that differentially interact with the sorbent. These nonideal interactions may distribute a component over multiple gradient steps, or over a wide elution range with a linear gradient. These behaviors may be mitigated by the addition of mobile phase modifiers (e.g., organic solvent, surfactants, and denaturants), and optimization (temperature, salt, pH, sample load) of separation conditions. 

Polarographic studies of organic compounds are very complicated. Many of the compounds behave as surfactants, most of them exhibit multiple-electron charge transfer, and very few are soluble in water. The measurement of the capacitance of the double layer, the cell resistance, and the impedance at the electrode/solution interface presents many difficulties. To examine the versatility of the FR polarographic technique, a few simple water-soluble compounds have been chosen for the study. The results obtained are somewhat exciting because the FR polarographic studies not only help in the elucidation of the mechanism of the reaction in different stages but also enable the determination of kinetic parameters for each step of reduction. 

For topical exposures, determining absorption (into the skin and into the systemic circulation) requires a different set of techniques. For determining how much material is left, skin washing is required. There are two components to skin washing in the recovery of chemicals. The first component is the physical rubbing and removal from the skin surface. The second component is the surfactant action of soap and water. However, the addition of soap effects the partitioning. Some compounds may require multiple successive washing with soap and water applications for removal from skin. 

Therefore, a C13-AE, a cationic (quaternary ammonium) surfactant (quat), an amphoteric Ci2-alkylamido betaine, and the non-ionic fatty acid diethanol amide (FADA) as presented with their FIA-MS spectra in Fig. 2.5.12(a)-(d) were analysed as pure blends and as mixtures always obtained from two blends in FIA-MS multiple ion detection mode (MID). Mixtures as well as pure blends contained identical concentrations of surfactant homologues. For AE quantitation the mass traces of all A m/z 44 equally spaced homologues (m/z 306-966) of the C13-AE were recorded. The cationic (quaternary ammonium) surfactant, the amphoteric Ci2-alkylamido betaine, and the non-ionic FADA were quantified recording the mass traces at m/z 214 and 228, or 184, 212, 240, 268, 285, 296, 313, 324 and 341, or 232,260, 288, 316 and 344, respectively. 

The most widely studied deformable systems are emulsions. These can come in many forms, with oil in water (O/W) and water in oil (W/O) the most commonly encountered. However, there are multiple emulsions where oil or water droplets become trapped inside another drop such that they are W/O/W or O/W/O. Silicone oils can become incompatible at certain molecular weights and with different chemical substitutions and this can lead to oil in oil emulsions O/O. At high concentrations, typical of some pharmaceutical creams, cosmetics and foodstuffs the droplets are in contact and deform. Volume fractions in excess of 0.90 can be achieved. The drops are separated by thin surfactant films. Selfbodied systems are multicomponent systems in which the dispersion is a mixture of droplets and precipitated organic species such as a long chain alcohol. The solids can form part of the stabilising layer - these are called Pickering emulsions. 

---