Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

SUPPLIERS PRODUCT TYPES

The suppliers product types index lists alphabetically the names of all of the adhesives suppliers contained in this book, showing the page numbers of their data sheets for each type of adhesive. [Pg.415]

Supplier (Product) CNT type Purity (% nanotubes) Diameter (nm) Length (pm) Density (g/cc) Price ... [Pg.427]

Table 4.2 shows the major biodegradable polymer suppliers by product type for 2005. [Pg.40]

Table 4.2 World biodegradable polymers market, 2005 - major suppliers by product type ... Table 4.2 World biodegradable polymers market, 2005 - major suppliers by product type ...
Six types of carbon black are produced worldwide acetylene black, channel black, furnace black, gas black, lamp black and thermal black. Specific physical and chemical properties of a carbon black grade are summarized on its material safety data sheet and the suppliers product technical bulletin. [Pg.163]

Sample 6410 appeared to be a failed synthesis, with little detectable peptide. Sample 7818 was quite pure, but had no correct product, since Gly had been substituted for Glu in the synthesis. The laboratory submitting sample 7818 used an instrument with amino acid cartridges that were refilled with bulk amino acid derivatives. Although it is not known whether the refilling procedure was carried out in-house or by a commercial supplier, this type of opportunity for a mistake could affect many peptide syntheses, and should be a cause for concern in all laboratories. Sample 8246 contained a large quantity of peptide missing the C-terminal Tyr. From the description on the protocol sheet, it appeared likely that this laboratory had prepared its own Tyr-resin. Yet purchase of preloaded resins provides no assurance of quality. [Pg.887]

The authors wish to acknowledge the several equipment suppliers who have provided information for this paper Brown Fintube Co., Dur O Lok, Gray Tool Co., Hahn Clay, Inc., Ingersol 1-Rand, Inc., Kammer Valves, Inc., Mogas Industries, Inc., UHDE GMBH, and Valvtron Industries. These companies are intended to be representative of component suppliers and types. No warranty or endorsement of these products is made or implied... [Pg.535]

Up to this point, retail supply chains have largely generated greater profit margins through driving out inefficiencies. For example, retailers have pushed the function of maintaining an inventory back onto the vendor or middleman. Vendors, in turn, have required lower prices and faster deliveries from their suppliers. This type of approach has been effective, but for many supply chains there is precious little fat stUl left to cut out of the system. To reach the next level of efficiency, productivity, tmd profitability, a new perspective on what retail competition means wfil have to be adopted. [Pg.781]

The provided warranties can differ depending on suppliers volition, customers demand, product type and attributes and other factors. The article deals with non-renewing one-dimensional free-replacement warranties, since it is the most frequent warranty type. When this type of warranty is used, the supplier is... [Pg.1935]

A seller (supplier) agent is at the supplier interface and is responsible for each product type. A request to purchase from an organization may iiseXitngger adaptations in the internal schedule for that organization and in turn cause its buyer agents to negotiate with its suppliers. To coor-... [Pg.180]

In order to construct our framework for inventory management in the supply chain, we first consider the inventory management problem at the consumption points i.e., at the locations where customer demands are realized. We call these locations the front-end points of the supply chain, or simply the end points. An end point will usually refer to a combination of place (geographic) and product type (stock-keeping unit). Initially, we shall assume that the end point does not face any supply delays for products it orders from its supplier. [Pg.410]

Compounders responded by developing new TPOs based on elastomer-modified ICP copolymers. Recently, resin suppliers have introduced even higher elastomer content reactor products called reactor TPOs (RxTPOs) (7). The result has been an ever broadening array of product types and continually improving performance in a variety of applications. The advent of metallocene plastomers (8) for PP modification represents the latest step in this continuous improvement process. [Pg.202]

The concept model at the case level (Fig. 14.3) contains two main types of elements (1) relevant domain level concepts and (2) case specific instances of the domain level concepts. The domain level concepts included in the concept model are Supplier, Product, Customer, Distribution Center, and Link while some concepts, for instance, Manufacturer are not included because they are not relevant to the particular case (i.e., manufacturing is not considered in the given supply chain). Associations among these concepts are used to define general relationships among different constituent parts of the supply chain. These associations are subsequently important to define data structure and analysis models. The Link concept is used to represent a connection between supply chain units. For... [Pg.263]

In the following, one can merge the two dimensions item categorization and buyer-supplier relationship types into one matrix. This serves to give an overview of the relationship in accordance with product type. [Pg.113]

Material Chemical type Resin supplier Products Biodegradation environment Production capacity (tons)... [Pg.93]

When selecting a nozzle for a specific plastic and production type, the manufacturer s recommendations must always be checked, since the specifics of the nozzle design may give rise to a shift away from the stated selection principle or increase the universality of the nozzle. Further, the process parameters, and particularly a long cycle time, may cause restrictions to use of the nozzle or the need to modify it. Depending on the size of the range, suppliers offer universal nozzles or nozzles tailored for strictly defined applications. [Pg.261]

Type Nominal tensile modulus, GPa Gb/in X 10 ) Nominal tensile strength, MPa Ob/in X 10 ) Ultimate strain,% Fiber density, Mg/m Gb/in ) Suppliers/ products... [Pg.239]

Supplier trade name Production type Optimum Temp. pH CQ Characteristics (according to the supplier)... [Pg.646]

For an index of suppliers and their product types, see page 415. [Pg.407]

Consider a scenario with n final products (rme component per product type) and demand i =, n. The supplier builds MTS inventories of g, units of finished product i at unit cost c and holds them in bucket 1. The supplier also builds and holds Q units of the generic component (unit cost c) in stock in bucket 2. Of this Q units, assume that units are earmarked for conversion to product i ( qi [Pg.167]

Zara has a sourcing strategy that varies by product type. For basic products such as white T-shirts, Zara aims for efficiency because demand is predictable. These products are sourced from suppliers in low cost countries. For trendy products for which demand is unpredictable, in contrast, Zara sources from company-owned factories in Europe. These factories are not low cost, but they are flexible and responsive to the rapidly evolving needs of the trendy market. [Pg.56]

The 3x3 matrix Ef with elements where ,/ = 1,2,3, characterizes the procurement volume on the company s supply side. The columns refer to the three segments of raw material / /, R2 and R3. The rows relate to the supplier base The first row (w=l) indicates the purchased raw material from the supply chain player that the simulation refers to. The second row (w=2) denotes the suppliers to which the SCI shall be implemented. The third row ( =3) refers to all other suppliers. Hence, the matrix characterizes the company s supply side by allocating the procurement volume of raw material into nine specific product-supplier-segments. Matrix structures the demand side analogously. The calculation of the extrapolation factors for the three segments of raw material Rm is performed according to Eq. (6-14). It is feasible for each product type P7, P2 and P3 respectively. [Pg.97]

Black masterbatch can be made with or without oil-extended SBR. Commercially there are available, worldwide, 11 numbered ESBR cold black masterbatches and 15 ESBR cold oil-black masterbatches (27). These types range in black type and content as well as oil type and amount. Of course, not every listed product is available from every supplier. [Pg.497]


See other pages where SUPPLIERS PRODUCT TYPES is mentioned: [Pg.593]    [Pg.415]    [Pg.416]    [Pg.593]    [Pg.415]    [Pg.416]    [Pg.464]    [Pg.208]    [Pg.138]    [Pg.229]    [Pg.739]    [Pg.37]    [Pg.40]    [Pg.108]    [Pg.111]    [Pg.112]    [Pg.113]    [Pg.113]    [Pg.120]    [Pg.95]    [Pg.130]    [Pg.47]    [Pg.27]    [Pg.144]    [Pg.183]    [Pg.1087]    [Pg.1087]    [Pg.72]    [Pg.320]   


SEARCH



Product types

© 2024 chempedia.info