Sulphonate salts amination

Other sulphonic acid derivatives react with amines to give sulphonamides. Sulphonate esters react with primary amines to give a sulphonamide and an alcohol as shown in equation 122495. Anhydrides undergo a similar reaction496,497 and in this case the second product is an ammonium sulphonate salt (equation 123). 

The amine is removed by the addition of alkali and characterised by a suitable derivative the sulphonic acid may then be recovered as the sodium salt and converted into a crystalline derivative, e.g., the S-benzyl-tso-thiuronium salt. 

Group II. The classes 1 to 5 are usually soluble in dilute alkali and acid. Useful information may, however, be obtained by examining the behaviour of Sails to alkaline or acidic solvents. With a salt of a water-soluble base, the characteristic odour of an amine is usually apparent when it is treated with dilute alkali likewise, the salt of a water soluble, weak acid is decomposed by dilute hydrochloric acid or by concentrated sulphuric acid. The water-soluble salt of a water-insoluble acid or base will give a precipitate of either the free acid or the free base when treated with dilute acid or dilute alkali. The salts of sulphonic acids and of quaternary bases (R4NOH) are unaflFected by dilute sodium hydroxide or hydrochloric acid. 

Hydrolysis of a sulphonamide. Mix 2 g. of the sulphonamide with 3-5 ml. of 80 per cent, sulphuric acid in a test-tube and place a thermometer in the mixture. Heat the test-tube, with frequent stirring by means of the thermometer, at 155-165° until the solid passes into solution (2-5 minutes). Allow the acid solution to cool and pour it into 25-30 ml. of water. Render the resulting solution alkaline with 20 per cent, sodium hydroxide solution in order to liberate the free amine. Two methods may be used for isolating the base. If the amine is volatile in steam, distil the alkaline solution and collect about 20 ml. of distillate extract the amine with ether, dry the ethereal solution with anhydrous potassium carbonate and distil off the solvent. If the amine is not appreciably steam-volatile, extract it from the alkaline solution with ether. The sulphonic acid (as sodium salt) in the residual solution may be identified as detailed under 13. 

Most of the inhibitors in use are organic nitrogen compounds and these have been classified by Bregman as (a) aliphatic fatty acid derivatives, b) imidazolines, (c) quaternaries, (d) rosin derivatives (complex amine mixtures based on abietic acid) all of these will tend to have long-chain hydrocarbons, e.g. CigH, as part of the structure, (e) petroleum sulphonic acid salts of long-chain diamines (preferred to the diamines), (/) other salts of diamines and (g) fatty amides of aliphatic diamines. Actual compounds in use in classes (a) to d) include oleic and naphthenic acid salts of n-tallowpropylenediamine diamines RNH(CH2) NH2 in which R is a carbon chain of 8-22 atoms and x = 2-10 and reaction products of diamines with acids from the partial oxidation of liquid hydrocarbons. Attention has also been drawn to polyethoxylated compounds in which the water solubility can be controlled by the amount of ethylene oxide added to the molecule. 

B. Naphthaquinone method Discussion. Many primary amines develop a blue colour when treated with ortho-quinones the preferred reagent is the sodium salt of l,2-naphthaquinone-4-sulphonic acid. 

Superior passive stabilised diazo compounds are afforded by the diazoamino compounds (triazenes) that arise by reaction of diazonium salts with a variety of secondary amines [114]. Typically, sarcosine (CH3NHCH2COOH), which gives products based on structure 4.114, as well as N-methyltaurine (CH3NHCH2CH2SO3H) and N methylaniline-4 Sulphonic acid,... 

The lower members of the homologous series of 1. Alcohols 2. Aldehydes 3. Ketones 4. Acids 5. Esters 6. Phenols 7. Anhydrides 8. Amines 9. Nitriles 10. Polyhydroxy phenols 1. Polybasic acids and hydro-oxy acids. 2. Glycols, poly-hydric alcohols, polyhydroxy aldehydes and ketones (sugars) 3. Some amides, ammo acids, di-and polyamino compounds, amino alcohols 4. Sulphonic acids 5. Sulphinic acids 6. Salts 1. Acids 2. Phenols 3. Imides 4. Some primary and secondary nitro compounds oximes 5. Mercaptans and thiophenols 6. Sulphonic acids, sulphinic acids, sulphuric acids, and sul-phonamides 7. Some diketones and (3-keto esters 1. Primary amines 2. Secondary aliphatic and aryl-alkyl amines 3. Aliphatic and some aryl-alkyl tertiary amines 4. Hydrazines 1. Unsaturated hydrocarbons 2. Some poly-alkylated aromatic hydrocarbons 3. Alcohols 4. Aldehydes 5. Ketones 6. Esters 7. Anhydrides 8. Ethers and acetals 9. Lactones 10. Acyl halides 1. Saturated aliphatic hydrocarbons Cyclic paraffin hydrocarbons 3. Aromatic hydrocarbons 4. Halogen derivatives of 1, 2 and 3 5. Diaryl ethers 1. Nitro compounds (tertiary) 2. Amides and derivatives of aldehydes and ketones 3. Nitriles 4. Negatively substituted amines 5. Nitroso, azo, hy-drazo, and other intermediate reduction products of nitro com-pounds 6. Sulphones, sul-phonamides of secondary amines, sulphides, sulphates and other Sulphur compounds... 

Substituted aldehydes and substituted amines also react for example, the sodium salt of a-naphthylamine 4-sulphonic acid when dissolved in water and shaken with an alcoholic solution of benzaldehyde yields sodium benzylidine naphthionate. 

Polyhydroxy- phenols. amino acids, di- and polyamino compounds, amino alcohols. Sulphonic acids. Sulphinic acids. Salts. sulphinic acids, aminosulphonic acids and sulphonamides. Some diketones and /3-keto esters. Ethers and acetals. Lactones. Acyl halides. Diaryl ethers. intermediate reduction products of nitro compounds. Sulphones, sulphonamides of secondary amines, sulphides, sulphates and other sulphur compounds. 

Dissolve 2-3 g of methyl toluene-p-sulphonate in 10 ml of dry toluene, add 1 g of the amine and boil the mixture for 20-30 minutes. Cool, and filter the precipitated quaternary salt. Recrystallise by dissolving the solid in the minimum volume of boling ethanol and then adding ethyl acetate until crystallisation commences. Filter the cold mixture, dry rapidly on a porous plate and determine the m.p. immediately. 

---