Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Sulfuric acid influence

Nishihara C and Nozoye H 1995 influence of underpotentiai deposition of copper with submonolayer coverage on hydrogen adsorption at the stepped surfaces Pt(955), Pt(322) and Pt(544) in sulfuric acid solution J. Electroanal. Chem. 396 139-42... [Pg.2756]

Copper etchants do not directly influence the electroless plating process, but are used merely to remove unwanted copper, and should not affect the deposit properties. The costs of waste treatment and disposal have led to disuse of throw-away systems such as chromic—sulfuric acid, ferric chloride, and ammonium persulfate. Newer types of regenerable etchants include cupric chloride, stabilized peroxide, and proprietary ammoniacal etchant baths. [Pg.112]

Investigated is the influence of the purity degree and concentration of sulfuric acid used for samples dissolution, on the analysis precision. Chosen are optimum conditions of sample preparation for the analysis excluding loss of Ce(IV) due to its interaction with organic impurities-reducers present in sulfuric acid. The photometric technique for Ce(IV) 0.002 - 0.1 % determination in alkaline and rare-earth borates is worked out. The technique based on o-tolidine oxidation by Ce(IV). The relative standard deviation is 0.02-0.1. [Pg.198]

To determine of Ce(IV) in acid soluble single crystals, a simple and sensitive method is proposed. The method is based on the reaction of tropeoline 00 oxidation by cerium(IV) in sulfuric acid solution with subsequent measurement of the light absorption decrease of the solution. The influence of the reagent concentration on the analysis precision is studied. The procedure for Ce(IV) determination in ammonium dihydrophosphate doped by cerium is elaborated. The minimal determined concentration of cerium equal to 0.04 p.g/ml is lower than that of analogous methods by a factor of several dozens. The relative standard deviation does not exceed 0.1. [Pg.198]

Thiobacillus thiooxidans is an aerobic organism that oxidizes various sulfur-containing compounds to form sulfuric acid. These bacteria are sometimes found near the tops of tubercles (see Chap. 3, Tubercu-lation ). There is a symbiotic relationship between Thiobacillus and sulfate reducers Thiobacillus oxidizes sulfide to sulfate, whereas the sulfate reducers convert sulfide to sulfate. It is unclear to what extent Thiobacillus directly influences corrosion processes inside tubercles. It is more likely that they indirectly increase corrosion by accelerating sulfate-reducer activity deep in the tubercles. [Pg.122]

On boiling the methiodide with 70% sulfuric acid an N-methyl-oxo derivative was obtained, and this in turn gave 3-amino-2-phenyl-quinoline, methylamine, and ammonia on fusion with soda lime. The bulk of the evidence therefore favors quaternization at N-2 (cf, 154), in which case the acid-hydrolysis product is 155. Quaternization at N-2 would be expected because of the steric influence of the 10-phenyl group and the influence of the 4-amino group (cf. 4-hydroxy-pyridazine ) in the pyridazine-type ring, although the partial double-bond character of that ring is probably different from that in pyridazine itself. [Pg.50]

Acylamino)benzaldehyde oximes 2 cyclize under the influence of sulfuric acid to afford high yields of benzoxadiazepines 3. Selected examples arc given yields were generally not reported.314... [Pg.441]

The nature of the brominating medium has an influence on reaction products. Although there is no need for strongly acidic reagents, a buffer is frequently added to adsorb HBr [81H(15)1285]. When 2,3-dibromobenzo[f>]thiophene was brominated in sulfuric acid with silver sulfate present, a small amount of the 4-bromo (but none of the expected 5-bromo) derivative was observed [70JCS(C)1949]. [Pg.253]

In the lead-acid battery, sulfuric acid has to be considered as an additional component of the charge-discharge reactions. Its equilibrium constant influences the solubility of Pb2+ and so the potential of the positive and negative electrodes. Furthermore, basic sulfates exist as intermediate products in the pH range where Fig. 1 shows only PbO (cf. corresponding Pour-baix diagrams in Ref. [5], p. 37, or in Ref. [11] the latter is cited in Ref. [8]). Table 2 shows the various compounds. [Pg.159]

Influence of the Concentration of Sulfuric Acid on the Rate of Nitration in... [Pg.13]

Fig 7a Influence of temperature on the yield of DNT, Nitration of o- and p-nitrotoluenes in nitrating mixtures with various concentrations of sulfuric acid (Kobe, Skinner and Prindle, Ref 45)... [Pg.233]

Acidity has an important influence on diazotization. Correlations of rates of diazotization with acidity and their implications regarding the reaction mechanism were first evaluated by Ridd (reviews Ridd, 1959, 1961, 1965, 1978 Williams, 1983, 1988). In this section we will concentrate mainly on aqueous solutions of sulfuric acid and perchloric acid, as the weakly nucleophilic anions of these acids do not interact with the nitrosating species. The mechanism of diazotization in the presence... [Pg.44]

Romero-Sanchez M.D., Pastor-Bias M.M., and Martm-Martmez J.M., 2002, Improved peel strength in vulcanized SBR rubber roughened before chlorination with trichloroisocyanuric acid, J. Adhes., 78, 15-38. Cepeda-Jimenez C.M., Pastor-Bias M.M., Ferrandiz-Gomez T.P., and Martfn-Martmez J.M., 2001, Influence of the styrene content of thermoplastic styrene-butadiene rubbers in the effectiveness of the treatment with sulfuric acid, Int. J. Adhes. Adhes., 21, 161-172. [Pg.772]

For Ti02 and Z1O2, it is well known that sulfation induces a strong increase of acidity [17] and the participation of an add mechanism could then account for this promotion of activity. This mechamsm can be described as a bifunctional process oxidation of NO to NO on Cu sites, and nitration of a product of the oxidation of decane on the acid fiinction(8). The preparation of the catalyst must have a great influence on the activity. This has been shown by the comparison of three Cu/TiC catalysts prepared in different conditions one in which titania is first treated with sulfuric acid, then by Cu acetate (denominated Cu 04/Ti02, containing 0.S wt% Cu, 0.6 wt% S), one in which Cu is... [Pg.628]

Ions not solvated are unstable in solutions between them and the polar solvent molecules, electrostatic ion-dipole forces, sometimes chemical forces of interaction also arise which produce solvation. That it occurs can be felt from a number of effects the evolution of heat upon dilution of concentrated solutions of certain electrolytes (e.g., sulfuric acid), the precipitation of crystal hydrates upon evaporation of solutions of many salts, the transfer of water during the electrolysis of aqueous solutions), and others. Solvation gives rise to larger effective radii of the ions and thus influences their mobilities. [Pg.106]

Combinations of hydrogen peroxide, sulfuric acid, and urea have been proposed [1]. The temperature influences the urea decomposition into ammonia and carbon dioxide that provokes pressure buildup in a formation model and a 19% increase of oil-displacement efficiency in comparison with water. [Pg.204]

Breiter MW. 1975. Influence of chemisorbed carbon monoxide on the oxidation of molecular hydrogen at smooth platinum in sulfuric acid solution. J Electroanal Chem 65 623-634. [Pg.553]

Hydrogen peroxide plays an important role in many processes in the atmosphere and in natural aqueous systems. It affects numerous redox reactions, which in turn influence the stability and transport of other chemical substances, e.g., pollutants. In the atmosphere, hydrogen peroxide is believed to be involved in several important oxidation reactions, e.g., conversion of sulfur dioxide to sulfuric acid... [Pg.154]

Mesitoic acid has been prepared by carbonation of mesityl-magnesium bromide 2-4 by hydrolysis of its amide prepared by condensation of mesitylene with carbamyl chloride under the influence of aluminum chloride 6 by oxidation of isodurene with dilute nitric acid 6-7 by distillation of 2,4,6-trimethylmandelic acid (low yield) 8 by dry distillation of 2,4,6-trimethyIphenyl-glyoxylic acid 9 by oxidation of the latter with potassium permanganate 10 and by treating 2,4,6-trimethylphenylglyoxylic acid with concentrated sulfuric acid in the cold11 or with heating.12... [Pg.106]

Ingot casting, 23 266 Ingot production, titanium, 24 857 Inhalation. See also Dust inhalation hydrogen fluoride, 14 17-18 influence on toxicity, 25 211 of PVC dust, 25 676-677 of sodium tetrasulfide, 22 875 studies of, 25 227t of sulfuric acid, 23 794 of toluene, 25 179t of VDC, 25 692-694 Inhalation anesthetics, 11 867-868 Inhalation exposure... [Pg.474]


See other pages where Sulfuric acid influence is mentioned: [Pg.308]    [Pg.308]    [Pg.382]    [Pg.199]    [Pg.259]    [Pg.85]    [Pg.1639]    [Pg.68]    [Pg.59]    [Pg.430]    [Pg.195]    [Pg.208]    [Pg.322]    [Pg.648]    [Pg.71]    [Pg.12]    [Pg.248]    [Pg.259]    [Pg.316]    [Pg.98]    [Pg.24]    [Pg.659]    [Pg.211]    [Pg.359]    [Pg.173]    [Pg.105]    [Pg.313]    [Pg.294]    [Pg.157]    [Pg.390]    [Pg.453]   
See also in sourсe #XX -- [ Pg.137 ]




SEARCH



Acid influences

Sulfur influence

© 2024 chempedia.info