Sulfuric acid color

Re-acidify this solution with 55 mL of 3 M sulfuric acid (color returns to... 

ISO 755-3-81. Butan-l-ol for industrial use - Methods of test - Part 3 Sulfuric acid color test. 

Carbonizable substances (paraffin) NFT 60-134 ASTM D 612 Coloration after treatment in concentrated sulfuric acid... 

To be able to prepare and study these elusive species in stable form, acids billions of times stronger than concentrated sulfuric acid were needed (so called superacids). Some substituted carbocations, however, are remarkably stable and are even present in nature. You may be surprised to learn that the fine red wine we drank tonight contained carbocations which are responsible for the red color of this natural 12% or so alcoholic solution. I hope you enjoyed it as much as I did. 

A group of aminoxanthenes, ie, pyra2oloxanthenes, is used as color formers ia pressure or heat-sensitive imaging papers (43). These compounds are colorless, but, upon contact with acidic electron-accepting material, are converted to resonance forms that are lightly colored. An example is stmcture [58294-05-6] (35), which forms upon the condensation of A[,A/-diethyl-y -aminophenol with phthalic anhydride, followed by addition of 6-hydroxyinda2ole ia 80% sulfuric acid (44). 

Cationic polymerization of coal-tar fractions has been commercially achieved through the use of strong protic acids, as well as various Lewis acids. Sulfuric acid was the first polymerization catalyst (11). More recent technology has focused on the Friedel-Crafts polymerization of coal fractions to yield resins with higher softening points and better color. Typical Lewis acid catalysts used in these processes are aluminum chloride, boron trifluoride, and various boron trifluoride complexes (12). Cmde feedstocks typically contain 25—75% reactive components and may be refined prior to polymerization (eg, acid or alkali treatment) to remove sulfur and other undesired components. Table 1 illustrates the typical components found in coal-tar fractions and their corresponding properties. 

A polyester-type fluorescent resin matrix (22) is made by heating trimellitic anhydride, propylene glycol, and phthaUc anhydride with catalytic amounts of sulfuric acid. Addition of Rhodamine BDC gives a bright bluish red fluorescent pigment soluble in DME and methanol. It has a softening point of 118°C. Exceptional heat resistance and color brilliance are claimed for products of this type, which are useful for coloring plastics. 

Colorimetric Method. A finely powdered sample treated with sulfuric acid, hydrobromic acid [10035-10-6] and bromine [7726-95-6] gives a solution that when adjusted to pH 4 may be treated with dithi one [60-10-6] ia / -hexane [110-54-3] to form mercuric dithi2onate [14783-59-6] (20). The resultant amber-colored solution has a color iatensity that can be compared against that of standard solutions to determine the mercury concentration of the sample. Concentrations below 0.02 ppm have been measured by this method. 

Analytical and Test Methods. o-Nitrotoluene can be analyzed for purity and isomer content by infrared spectroscopy with an accuracy of about 1%. -Nitrotoluene content can be estimated by the decomposition of the isomeric toluene diazonium chlorides because the ortho and meta isomers decompose more readily than the para isomer. A colorimetric method for determining the content of the various isomers is based on the color which forms when the mononitrotoluenes are dissolved in sulfuric acid (45). From the absorption of the sulfuric acid solution at 436 and 305 nm, the ortho and para isomer content can be deterrnined, and the meta isomer can be obtained by difference. However, this and other colorimetric methods are subject to possible interferences from other aromatic nitro compounds. A titrimetric method, based on the reduction of the nitro group with titanium(III) sulfate or chloride, can be used to determine mononitrotoluenes (32). Chromatographic methods, eg, gas chromatography or high pressure Hquid chromatography, are well suited for the deterrnination of mononitrotoluenes as well as its individual isomers. Freezing points are used commonly as indicators of purity of the various isomers. 

The reaction is completed after 6—8 h at 95°C volatiles, water, and some free phenol are removed by vacuum stripping up to 140—170°C. For resins requiring phenol in only trace amounts, such as epoxy hardeners, steam distillation or steam stripping may be used. Both water and free phenol affect the cure and final resin properties, which are monitored in routine quaHty control testing by gc. OxaHc acid (1—2 parts per 100 parts phenol) does not require neutralization because it decomposes to CO, CO2, and water furthermore, it produces milder reactions and low color. Sulfuric and sulfonic acids are strong catalysts and require neutralization with lime 0.1 parts of sulfuric acid per 100 parts of phenol are used. A continuous process for novolak resin production has been described (31,32). An alternative process for making novolaks without acid catalysis has also been reported (33), which uses a... 

Tall oil rosin is a by-product of paper manufacturing. Raw wood chips are digested under heat and pressure with a mixture of sodium hydroxide and sodium sulfide. Soluble sodium salts of lignin, rosin, and fatty acids are formed, which are removed from the wood pulp as a dark solution. The soaps of the rosin and fatty acids float to the top of the mixture, where they are skimmed off and treated with sulfuric acid to free the rosin and fatty acids. This mixture, known as cmde tall oil (CTO), is refined further to remove color and odor bodies fractional distillation separates the tall oil rosin acids from the fatty acids (see Tall oil). 

Colorimetric Methods. Numerous colorimetric methods exist for the quantitative determination of carbohydrates as a group (8). Among the most popular of these is the phenol—sulfuric acid method of Dubois (9), which rehes on the color formed when a carbohydrate reacts with phenol in the presence of hot sulfuric acid. The test is sensitive for virtually all classes of carbohydrates. Colorimetric methods are usually employed when a very small concentration of carbohydrate is present, and are often used in clinical situations. The Somogyi method, of which there are many variations, rehes on the reduction of cupric sulfate to cuprous oxide and is appHcable to reducing sugars. 

Specifically MSA has been found to be more effective than -toluenesulfonic acid and sulfuric acid in preparing dioctyl phthalate (405). A U.S. patent also discloses its use to prepare light-colored fatty esters (406). It is also important as a catalyst to prepare acrylates, methacrylates, adipates, phthalates, trimeUitates, thioglycolates, and other esters. 

---