Sulfur bound composites

For want of a well established terminology, the phrase "sulfur-bound composites is used here to differentiate those materials in which sulfur is the main binder from "sulfur-containing composites in which other materials, such as portland cement or asphalt, may act as the predominant binder. 

XANES of Petroleum Residua. On the left side of Figure 1 the sulfur K edge spectra for three different petroleum residua and the asphaltene samples prepared from them are shown. While the absorption spectra all appear to be similar, differences are revealed by examining the third derivatives of the spectra, which are shown on the right side of the figure. All the residua samples appear to contain sulfur bound in sulfidic and thiophenic forms, the amount of sulfidic sulfur increasing from sample 1 to sample 3. The asphaltene samples prepared from residua 2 and 3 also appear to contain both forms. Assuming that the composition of the sulfur... 

Figure 30 Sulfur isotopic composition of Phanerozoic seawater based on measurements of sulfur structurally bound in calcitic shells as well as evaporites. Note that the shell samples are mostly the same as those of the Sr, O, and C isotopes in Veizer et al. (1999) (after Kampschulte, 2001 by courtesy of the author).

SCHOUTEN S., SCHOELL M., SiNNiNGHE Damste J. S., SUMMONS R. E. and DE Leeuw J. W. (2001) Molecular biogeochemistry of Monterey sediments, Naples Beach, California II. Stable carbon isotopic composition of free and sulfur bound carbon skeleton. In The Monterey Formation, from Rock to Molecules (eds. C. M. ISAACS and J. RullkoettER), pp. 175-188. Columbia University Press, New York. 

Another method which has been used to prevent the sticking of isocyanate-bound composite boards to metal press surfaces is to treat the platens or cauls with a release agent. " This method has the obvious disadvantage that the metal surfaces have to be treated intermittently with the release agent. A more convenient method has been to add internal release agents to the binder composition. Several compounds have been patented for this use including derivatives of phosphorus, " sulfur, mixtures of furfural with phosphates, and vegetable waxes. ... 

Incompletely Characterized Carbon Sulfides. A poorly characterized black soHd, known as carsul, occurs as a residue ia sulfur distillation or as a precipitate ia molten Frasch sulfur (12,13). Although this material may approach the composition of a carbon sulfide, it is more likely also to contain some chemically bound hydrogen and possibly other elements. Carbon—sulfur surface compounds of the formula C S, where xis greater than 4,... 

Giardia intestinalis contains PFOR and has been shown to produce hydrogen (Lloyd et al. 2002) but has not been found to contain hydrogeno-somes. Its iron-sulfur composition appears to be quite distinct from those of the trichomonads. EPR showed both soluble and membrane-bound iron-sulfur proteins of the [4Fe-4S] type (ElUs et al. 1993). 

A second example of a membrane-bound arsenate reductase was isolated from Sulfurospirillum barnesii and was determined to be a aiPiyi-heterotrimic enzyme complex (Newman et al. 1998). The enzyme has a composite molecular mass of 100kDa, and a-, P-, and y-subunits have masses of 65, 31, and 22, respectively. This enzyme couples the reduction of As(V) to As(III) by oxidation of methyl viologen, with an apparent Kra of 0.2 mM. Preliminary compositional analysis suggests that iron-sulfur and molybdenum prosthetic groups are present. Associated with the membrane of S. barnesii is a h-type cytochrome, and the arsenate reductase is proposed to be linked to the electron-transport system of the plasma membrane. 

Analytical data on the soluble products isolated from chloroform are in excellent agreement with the composition 1 Ni+2 1 monoalkylated ligand 1 I or Br. The magnetic moment of this methylated complex was found to be 1.89 Bohr magnetons per nickel (II). The molar conductivities of the methylated and benzylated complexes in methanol at 25° C. are 75.4 and 68.4 ohm-1, respectively. These values approximate those expected for uni-univalent electrolytes in this solvent. The formulation of these alkylated compounds as dimeric electrolytes (structure VII) does not appear to be totally consistent with their physical properties. One or both halide ions may be bound to the metal ion. These results lead to the easily understood generalization that terminal sulfur atoms alkylate more readily than bridged mercaptide groups. 

A second group of electron carriers in mitochondrial membranes are the iron-sulfur [Fe-S] clusters which are also bound to proteins. Iron-sulfur proteins release Fe3+ or Fe2+ plus H2S when acidified. The "inorganic clusters" bound into the proteins have characteristic compositions such as Fe2S2 and Fe4S4. The sulfur atoms of the clusters can be regarded as sulfide ions bound to the iron ions. The iron atoms are also attached to other sulfur atoms from cysteine side chains from the proteins. The Fe-S proteins are often tightly associated with other components of the electron transport chain. For example, the flavoproteins Flavin 1, Flavin 2, and Flavin 3 shown in Fig. 10-5 all contain Fe-S clusters as does the Q-cytochrome b complex. All of these Fe-S clusters seem to be one-electron carriers. 

Solid solutions in metallic alloys are normally compositionally very uniform random variations of 5% would be unusual. Also, a two phase layer normally is found between two solid solutions. The sulfur distribution in coal seems not to behave this way. Apparently, the distribution pattern established at some early stage of coal formation is frozen-in and the organic sulfur is bound so tightly to its hydrocarbon sites that it cannot diffuse until the temperature of the coal is raised to 400°C or above (18). 

Artificial Maturation. Laboratory maturation studies provide a means to determine the influence of temperature on kerogen composition, since other variables (e.g. source input) can be eliminated. In order to study the behaviour of organically bound sulfur under these controlled conditions, Py-GC-FID/FPD was performed on a suite of solvent-extracted residues from sealed vessel (hydrous pyrolysis) experiments aimed at simulating maturation over the range involved in petroleum generation. 

Fig. 7 The location on tubulin of residues that modulate the sensitivity to MT-destabilizing agents and the location of exogenous inhibitor and nucleotide sites on P tubulin. The a subunit is in semitransparent pink together with a composite P-subunit color-coded as in Fig. 3a with ball-and-stick models of bound taxol (orange), colchicine (yellow) and GDP (magenta). Ball-and-stick models of vinblastine (cyan) are drawn on the two partial vinca sites on a and on P tubulin. The sulfur atom of Cys P12 is highlighted as a yellow sphere. The sites of nine amino acid substitutions [49] that both confer resistance to vinblastine and colchicine and stabilize MTs are depicted as red (on a tubulin) or green (on P tubulin) spheres. Two residues of the P H10 helix whose mutations enhance the sensitivity to colchicine site ligands and destabilize MTs [71] are also shown as blue spheres...

---