Styrene Specifications

To illustrate the specific operations involved, the scheme below shows the first steps and the final detachment reaction of a peptide synthesis starting from the carboxyl terminal. N-Boc-glycine is attached to chloromethylated styrene-divinylbenzene copolymer resin. This polymer swells in organic solvents but is completely insoluble. ) Treatment with HCl in acetic acid removes the fert-butoxycarbonyl (Boc) group as isobutene and carbon dioxide. The resulting amine hydrochloride is neutralized with triethylamine in DMF. 

By analogy, a great many of other functionalized styrenes, including carboxyHc acids, amino acids, Schiff bases, or specific compounds, eg, l-DOPA, have successfully been appHed as print templates. Moreover, it has also been shown that siUca gel can be imprinted with similar templates, and that the resulting gel has specific recognition sites determined by the print molecule (162—164). 

The combination of durability and clarity and the ability to tailor molecules relatively easily to specific applications have made acryflc esters prime candidates for numerous and diverse applications. At normal temperatures the polyacrylates are soft polymers and therefore tend to find use in applications that require flexibility or extensibility. However, the ease of copolymerizing the softer acrylates with the harder methacrylates, styrene, acrylonitrile, and vinyl acetate, allows the manufacture of products that range from soft mbbers to hard nonfilm-forming polymers. 

Synthetic. The main types of elastomeric polymers commercially available in latex form from emulsion polymerization are butadiene—styrene, butadiene—acrylonitrile, and chloroprene (neoprene). There are also a number of specialty latices that contain polymers that are basically variations of the above polymers, eg, those to which a third monomer has been added to provide a polymer that performs a specific function. The most important of these are products that contain either a basic, eg, vinylpyridine, or an acidic monomer, eg, methacrylic acid. These latices are specifically designed for tire cord solutioning, papercoating, and carpet back-sizing. 

Table 5. Specifications for Typical Polymerization-Grade Styrene Monomer Product...

Some polymers from styrene derivatives seem to meet specific market demands and to have the potential to become commercially significant materials. For example, monomeric chlorostyrene is useful in glass-reinforced polyester recipes because it polymerizes several times as fast as styrene (61). Poly(sodium styrenesulfonate) [9003-59-2] a versatile water-soluble polymer, is used in water-poUution control and as a general flocculant (see Water, INDUSTRIAL WATER TREATMENT FLOCCULATING AGENTs) (63,64). Poly(vinylhenzyl ammonium chloride) [70304-37-9] h.a.s been useful as an electroconductive resin (see Electrically conductive polya rs) (65). 

Fig. 15. Oxygen permeability versus 1/specific free volume at 25 °C (30). 1. Polybutadiene 2. polyethylene (density 0.922) 3. polycarbonate 4. polystyrene 5. styrene-acrylonitrile 6. poly(ethylene terephthalate) 7. acrylonitrile barrier polymer 8. poly(methyl methacrylate) 9. poly(vinyl chloride) 10. acrylonitrile barrier polymer 11. vinyUdene chloride copolymer 12. polymethacrylonitrile and 13. polyacrylonitrile. See Table 1 for unit conversions.

Global consumption of thermoplastic mbbers of all types is estimated at about 600,000 t/yr (51). Of this, 42% was estimated to be consumed in the United States, 39% in Western Europe, and 19% in Japan. At present, the woddwide market is estimated to be divided as follows styrenic block copolymers, 48% hard polymer/elastomer combinations, 26% thermoplastic polyurethanes, 12% thermoplastic polyesters, 4% and others, 9%. The three largest end uses were transportation, 23% footwear, 18% and adhesives, coatings, etc, 16%. The ranges of the hardness values, prices, and specific gravities of commercially available materials are given in Table 4. 

The styrene-diene triblocks, the main subject of this section, are made by sequential anionic polymerisation (see Chapter 2). In a typical system cc-butyl-lithium is used to initiate styrene polymerisation in a solvent such as cyclohexane. This is a specific reaction of the type... 

Other additives. Amorphous polypropylene, waxes and asphalt can be added to decrease the cost of BR formulations. On the other hand, PIB can be blended with NR, styrene-butadiene rubber, EVA and low molecular weight polyethylene to impart specific properties. 

Isocyanates can be added to solvent-borne CR adhesive solutions as a two-part adhesive system. This two-part adhesive system is less effective with rubber substrates containing high styrene resin and for butadiene-styrene block (thermoplastic rubber) copolymers. To improve the specific adhesion to those materials, addition of a poly-alpha-methylstyrene resin to solvent-borne CR adhesives is quite effective [76]. An alternative technique is to graft a methacrylate monomer into the polychloroprene [2]. 

The styrene-divinylbenzene matrix of the Styragel packings is chemically very inert, which makes this family of packings useful for a broad range of applications. The chromatographic conditions for the analysis of many polymers have been worked out in detail. A more specific discussion of the solvents recommended for the different polymer types is included in Section III,A,4. 

An example of a biphasic, Ni-catalyzed co-dimerization in ionic liquids with weakly coordinating anions has been described by the author s group in collaboration with Leitner et al. [12]. The hydrovinylation of styrene in the biphasic ionic liq-uid/compressed CO2 system with a chiral Ni-catalyst was investigated. Since it was found that this reaction benefits particularly from this unusual biphasic solvent system, more details about this specific application are given in Section 5.4. 

Interestingly, the specific environment of the ionic solvent system appears to activate the chiral Ni-catalyst beyond a simple anion-exchange reaction. This becomes obvious from the fact that even the addition of a 100-fold excess of Fi[(CF3S02)2N] or Na[BF4] in pure, compressed CO2 produced an at best moderate activation of Wilke s complex in comparison to the reaction in ionic liquids with the corresponding counter-ion (e.g., 24.4 % styrene conversion with 100-fold excess of Fi[(CF3S02)2N], in comparison to 69.9 % conversion in [EMIM][(CF3S02)2N] under otherwise identical conditions). 

The theory of radiation-induced grafting has received extensive treatment. The direct effect of ionizing radiation in material is to produce active radical sites. A material s sensitivity to radiation ionization is reflected in its G value, which represents the number of radicals in a specific type (e.g., peroxy or allyl) produced in the material per 100 eV of energy absorbed. For example, the G value of poly(vinyl chloride) is 10-15, of PE is 6-8, and of polystyrene is 1.5-3. Regarding monomers, the G value of methyl methacrylate is 11.5, of acrylonitrile is 5.6, and of styrene is >0.69. 

There are several reports scattered in the literature of the retarding effect of simple furan derivatives in the polymerization of a specific monomer. Hardy69, U6 found that furan, 2-furoic acid and its esters, and 5-substituted-2-furoie acids were strong retarders in the radical polymerization of vinyl acetate, but did not act likewise with styrene. He proposed that as a result of the reactions of the free radicals with the furan derivatives, dihydro- and tetrahydrofurans would form, but he did not produce any evidence to support these speculations. Clarke, Howard and Stock-... 

---