Styrene-maleic anhydride-butyl copolymer

The composition and quantity of styrene-maleic anhydride (SMA) copolymer resins were varied in emulsion copolymerisation of methyl methacrylate and n-butyl acrylate conducted by both batch and semicontinuous processes. The resulting particle sizes and levels of coagulum were measured to determine the optimum conditions for incorporation of the SMA resins into the resulting latexes. A semicontinuous process, in which no buffer was included and the SMA was added in a second stage comonomer emulsion, was found to produce coagulum-free latexes. 13 refs. 

Attempts have been made over time to improve the physical properties of novolacs. The use of phenol formaldehyde resins prepared in alkaline medium in photoresist compositions is mentioned in a Kalle Co. AG patent. The use of polyvinyl ethers in combination with novolacs to impart stickiness and plasticization action to the latter was patented by Christensen. Steinhoff, Isaacson, and Roelants of the Shipley Company mention the use of vinyl ethers in a patent on roller coating. Lower alkyl polyvinyl ethers, such as methyl, ethyl, butyl, and isobutyl, are added to novolac resins to improve coating flexibility and adhesion to metal surfaces as well as to improve resistance to mildly alkaline solutions. The use of styrene, methyl styrene, and styrene-maleic anhydride copolymers in combination with novolac was mentioned in several patents of both Shipley and Kalle Co. AG. When novolac is copolymerized with maleic anhydride, a resin that is readily soluble in alkaline solutions is obtained. ... 

Blends of PE with styrene-maleic anhydride copolymer were coarse and weak. When t-V-butyl aminoethyl methacrylate was grafted onto the PE, it reacted with the maleic anhydride to form amide block copolymer at the interface, giving finer morphology, and higher tensile and impact strengths [179]. 

Material properties of polymers are determined by their chain miaostmctures. For polymers made from a single monomer type, the above-discussed molecular weight and distribution, chain stereoregularity, head-tail and trans-cis configurations, and so on all play important roles. For copolymers that contain multiple monomer types, chain composition, sequence, as well as their distributions, are added to the important microstmc-ture property list. With these new parameters, almost unlimited number of polymer types can be produced for better balance of properties for commercial applications. Outstanding commercial examples include acrylonittile-butadiene-styrene (ABS), SBS, Acrylan (acrylonittile-vinyl acetate), styrene-butadiene (SBR), butyl mbber (isobutylene-isoprene), Vinylite (vinyl chloride-vinyl acetate), and styrene-maleic anhydride (SMA). 

Figure 14.9 Effect of various impact modifiers (25wt%) on the notched Izod impact strength of recycled PET (as moulded and annealed at 150°C for 16 h) E-GMA, glycidyl-methacrylate-functionalized ethylene copolymer E-EA-GMA, ethylene-ethyl acrylate-glycidyl methacrylate (72/20/8) terpolymer E-EA, ethylene-ethyl acrylate EPR, ethylene propylene rubber MA-GPR, maleic anhydride grafted ethylene propylene rubber MBS, poly(methyl methacrylate)-g-poly(butadiene/styrene) BuA-C/S, poly(butyl acrylate-g-poly(methyl methacrylate) core/shell rubber. Data taken from Akkapeddi etal. [26]...

Other commercial copolymers which are typically random are those of vinyl chloride and vinyl acetate (Vinylite), isobutylene and isoprene (butyl rubber), styrene and butadiene (SBR), and acrylonitrile and butadiene (NBR). The accepted nomenclature is illustrated by EP, which is designated poly-ethylene-co-propylene the co designating that the polymer is a copolymer. When the copolymers are arranged in a regular sequence in the chains, i.e., ABAB, the copolymer is called an alternating copolymer. A copolymer consisting of styrene and maleic anhydride (SMA) is a typical alternating copolymer. 

The polymer microstructure based on triad intensities in pyrolysates has been evaluated for poly(styrene-co-butyl acrylate), poly(styrene-co-methyl methacrylate), poly(vinyl chloride-co-vinylidene chloride), poly(styrene-co-maleic anhydride), and for chlorinated polyethylene considered as a copolymer of polyethylene and vinyl chloride [30]. 

Consider the copolymerization of 1,3-butadiene with the following monomers n-butyl vinyl ether, methyl methacrylate, methyl acrylate, styrene, vinyl acetate, acrylonitrile, maleic anhydride. If the copolymerizations were carried out using cationic initiation, what would be expected qualitatively for the copolymer compositions List the copolymers in order of their increasing butadiene content. Would copolymers be formed from each of the comonomer pairs Explain what would be observed if one used anionic initiation ... 

Glycidyl methacrylate copolymers Ethylene/butyl acrylate/maleic anhydride copolymers Styrene/ethylene-butylene/styrene block copolymer Poly(amide) (PA), MgO Silicone rubber and aminosilane Liquid crystalline polymers Improved impact strength Improved impact strength" Improved impact strength Improved electrical properties, in glass fiber applications" Improved mechanical properties" Viscosity reduction" ... 

Copolymerization of 4-vinylphenyl isocyanate and styrene at 60°C in toluene in the presence of AIBN affords the expected copolymers (44). Also, 1 1 copolymers from vinyl isocyanate and maleic anhydride are known (54). The copolymeriation of n-butyl isocyanate with a variety of olefins is conducted in toluene/THF at —80°C, using sodium biphenyl as initiator (55). Anionic copolymerization of styrene and hexyl isocyanate affords rod-coil block copolymers. The st5Tene polsrmer forms the coil block, while the polyisocyanate block assumes the rod shape (56). Vinyl-, 9-decenyl-, or y3-allyloxyethyl isocyanate imdergoes copolymerization reactions with styrene or methyl methacrylate (57). 

Other applications in which the two techniques are not connected in line mainly include the determination of molecular weights of copolymers of MMA, butyl acrylate styrene, and maleic anhydride [283, 284], cyclic PS [285-288], thiophene-phenylene copolymers [289], methacryloxypropyltrimethoxy silane [290], various copolymers [291], PEG [287], polyetherimide photooxidation products [292], polyester-polyurethane [293], biodegradable polymers [294], and polyethylene-propylene oxide-ethylene oxide triblock polymers [295]. 

Other applications include the fractionation of high molecular weight Ryaluronan [19], methyl methacrylate, -butyl acrylate, styrene, and maleic anhydride copolymers [20,21], partially crosslinked polyethylenes (PE) [22], star PS [23], high-density polyethylene [24], polyglycerols [25], and stereoregular polyethyl methacrylate [26]. 

Montaudo [11, 13, 14] also described a new method for fully characterising copolymers, which is based on off-line SEC-NMR and SEC-MALDI. It was applied to the analysis of random copolymers reacted at high conversions. The method involves fractionation of the copolymers by size exclusion chromatography, analysis of the fractions by NMR and MALDI mass spectroscopy and derivation of bivariate distribution of composition of the fractions. These copolymers include copolymers containing units of methyl methacrylate, butyl acrylate, styrene and maleic anhydride. Perspectives and limitations of the technique are also considered. 

Other compounds reacting similarly via activated double bonds (excluding here block or graft copolymerization) include maleic acid, A-methyl-maleimide, chloromaleic anhydride, fumaric acid, y-crotonolactone,/7-benzoquinone, and acrylonitrile. Other polymers with unsaturated backbones, such as polybutadiene, copolymers of butadiene with styrene and with acrylonitrile, and butyl rubber, react in similar ways, but the recorded reaction with poly(vinyl chloride) is largely mechanochemical in nature (discussed later). 

---