Styrene development catalyst properties

The reaction rate of fumarate polyester polymers with styrene is 20 times that of similar maleate polymers. Commercial phthaHc and isophthaHc resins usually have fumarate levels in excess of 95% and demonstrate full hardness and property development when catalyzed and cured. The addition polymerization reaction between the fumarate polyester polymer and styrene monomer is initiated by free-radical catalysts, commercially usually benzoyl peroxide (BPO) and methyl ethyl ketone peroxide (MEKP), which can be dissociated by heat or redox metal activators into peroxy and hydroperoxy free radicals. 

Rhenium oxides have been studied as catalyst materials in oxidation reactions of sulfur dioxide to sulfur trioxide, sulfite to sulfate, and nitrite to nitrate. There has been no commercial development in this area. These compounds have also been used as catalysts for reductions, but appear not to have exceptional properties. Rhenium sulfide catalysts have been used for hydrogenations of organic compounds, including benzene and styrene, and for dehydrogenation of alcohols to give aldehydes (qv) and ketones (qv). The significant property of these catalyst systems is that they are not poisoned by sulfur compounds. 

Between the 1920s when the initial commercial development of mbbery elastomers based on 1,3-dienes began (5—7), and 1955 when transition metal catalysts were fkst used to prepare synthetic polyisoprene, researchers in the U.S. and Europe developed emulsion polybutadiene and styrene—butadiene copolymers as substitutes for natural mbber. However, the tire properties of these polymers were inferior to natural mbber compounds. In seeking to improve the synthetic material properties, research was conducted in many laboratories worldwide, especially in the U.S. under the Rubber Reserve Program. 

Since the last edition several new materials have been aimounced. Many of these are based on metallocene catalyst technology. Besides the more obvious materials such as metallocene-catalysed polyethylene and polypropylene these also include syndiotactic polystyrenes, ethylene-styrene copolymers and cycloolefin polymers. Developments also continue with condensation polymers with several new polyester-type materials of interest for bottle-blowing and/or degradable plastics. New phenolic-type resins have also been announced. As with previous editions I have tried to explain the properties of these new materials in terms of their structure and morphology involving the principles laid down in the earlier chapters. 

Hivalloy A process for grafting styrenic polymers on to polyolefines, using a Ziegler-Natta catalyst. The products combine the physical properties of both polymer types. Developed by Montell and commercialized in the United States in 1997. See also Catalloy. Oxley, D. F., Chem. Ind. (London), 1998, (8), 307. 

Styrene-divinylbenzene resins, 23 353 Styrene-DVB copolymers, 14 388 Styrene ionomers, 14 466, 481 properties of, 14 470-473 Styrene liquid, 23 347 Styrene-maleic anhydride (SMA) copolymers, 23 391 copolymer, 10 207 Styrene manufacture, 24 259 Styrene manufacturing, 23 326, 334-345 development of high selectivity catalyst for, 23 339... 

EP-4 developed by ERDL is a very flexible polyester based on polyethylene glycol with molecular weight-200 (PEG-200), isophthalic acid (IPA) and maleic anhydride (MAn). Before its use, it is blended with styrene monomer (1 1) and cured at room temperature using cobalt naphthenate (as an accelerator) and methyl ethyl ketone (MEK) peroxide (as a catalyst). This meets the requirements of the main inhibitor and is used for inhibition of DB and CMDB propellants after the application of a barrier coat (generally a rigid polyester such as PR-3). However, it is observed during manufacture of EP-4 that there is a lot of batch-to-batch variation in properties in spite of the strict quality control measures adopted during its manufacture. 

The development of the Ziegler-Natta catalysts has affected rubber production as well. Eirst, it facilitated the synthesis of all-c/s polyisoprene and the demonstration that its properties were nearly identical to those of natural rubber. (A small amount of synthetic natural rubber is produced today.) Second, a new kind of synthetic rubber was developed all-c/s polybutadiene. It now ranks second in production after styrene-butadiene rubber. 

---