Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Stock standards

Nonintegral pipe attachments are used widely for support purposes. They are favored for their simplicity in attachment to the pipe wall, freedom in location, and availability as standardized stock items from many suppHers (see Fig. 6). [Pg.60]

Desiccant grade activated alumina is a highly porous form of aluminium oxide. It has the appearance of white chalky beads. Standard stock sizes have 2 - 5 mm or 5 - 8 mm. beads. An adsorbent from liquids and gases it is supplied usually in bulk packs. [Pg.154]

Stamm-, parent, original, primary, main, standard. stock, -aktie, /, share of common stock, -ansatz, m. (Dyeing) stock liquor, stock mixture, stock paste. -Mtze, /. (Calico) standard discharge, stock discharge, -baum, m, flow sheet pedigree. [Pg.423]

Costs of stoneware articles are usually lower than those of competitive materials. The cost per pound is always much lower, but the degree of complexity of the required article and its availability or otherwise in standard stock sizes will, of course, influence the total cost. Owing to the manufacturing methods employed for stoneware, special designs may easily be produced, and hence mould charges may be very low. [Pg.912]

Lead caprate. Prepare a standard stock solution by dissolving 0.1323 g of the solid in 2 mL of naphthenic acid with warming. Add 20 mL of 4-methylpentan-2-one (methyl isobutyl ketone), cool and then make up to the mark in a 100 mL graduated flask with more of the ketone. [Pg.809]

Prepare a fresh set of protein standards by diluting the 2.0 mg per ml BSA stock standard (stock solution) as shown in Table 14.2. There will be sufficient volume for three replications of each diluted BSA standard, if necessaiy. [Pg.336]

Design Considerations for RO Reverse osmosis plants are typically assembled onto carbon steel or stainless steel frames using permutations of components from the hundreds of individual standard stock items commonly available, including a wide range of membranes, each with their own range of design features and applications. [Pg.364]

A standard stock solution of sirolimus was prepared in methanol. Controls and standard working solutions were prepared by spiking blank whole blood with the stock solution. Standards, controls, and patient whole blood (10 fi. ) were transferred to 1.5 mL polypropylene tubes, mixed with 40 fiL of 0.1M zinc sulfate solution, precipitated with 100 fiL of methanol containing the IS (2 fig/L), vor-texed vigorously for 5 sec, and centrifuged at 10,500 g for 5 min. Supernatants were collected and assayed. The injection volume was 20 fiL. The retention times of sirolimus and ascomycin were 0.93 and 0.89 min, respectively. The total run time was 2.5 min. Representative MRM chromatograms of a patient sample are shown in Figure 11.6. [Pg.308]

Restricted formulary at each ward with well known medications. Supported with routines and standardized stock ordering and prescribing modules. [Pg.93]

Since certified reference materials for seawater nutrient analysis are currently unavailable, individual laboratories must prepare their own standard solutions for instrument calibration. Standard stock solutions are prepared at high concentrations (mM) so that they can be used for months without significant alterations in concentration. Working low-concentration standard solutions are unstable and need to be prepared daily by diluting stock solutions with distilled water or low-nutrient seawater. In this case, the accuracy of nutrient analysis at a given laboratory is highly dependent upon the accuracy of the daily preparation of the calibration solutions. [Pg.47]

Analysis was carried out by difference spectrophotometry. A one-point standard calibration for the determination of aspirin in dextropropoxyphene compound capsules was prepared by adding a known amount of aspirin to the sample from a standard stock solution. Stated content in the capsules ... [Pg.91]

The following standard stock solutions were prepared in order to calibrate the instrument for sodium and potassium ... [Pg.124]

The standard stocks of the positive and negative serum were obtained from the State Research Institute of Biotechnology and Strains of Microorganisms Control of the Ministry of Agroindustrial Policy of Ukraine as well as from the National Reference Laboratory for EBI (Federal Research Institute for Animal Health, Germany). [Pg.79]

Color. Standards Stock standard. Dissolve 1.245g of potassium chloroplatinate (K2PtCl6) and l.OOOg of cobaltous chloride (C0CI26H2O) in water. Add 100ml of coned HQ, and dilute the soln to 1000.0ml with water. (This soln has a color of 500 on the APHA and ASTM platinum-cobalt scales)... [Pg.161]

The correlation coefficient, y-intercept, and slope of the regression line should be included. A plot of the data should be included. For the establishment of linearity, a minimum of five concentrations are recommended. It may be demonstrated directly on the active substance (by dilution of a standard stock solution). [Pg.437]

Standard stock solutions of formate anion were prepared from reagent grade sodium formate. Standard solutions of other organic anions were prepared for assessment of potential interferences. Injections of 3 mL were made to fill a sample loop of 100 yL volume. [Pg.601]

Another approach is to prepare a stock solution of high concentration. Linearity is then demonstrated directly by dilution of the standard stock solution. This is more popular and the recommended approach. Linearity is best evaluated by visual inspection of a plot of the signals as a function of analyte concentration. Subsequently, the variable data are generally used to calculate a regression line by the least-squares method. At least five concentration levels should be used. Under normal circumstances, linearity is acceptable with a coefficient of determination (r2) of >0.997. The slope, residual sum of squares, and intercept should also be reported as required by ICH. [Pg.735]

Calculation of concentration of standard stock solution in miligram/mL... [Pg.294]

Stable isotope internal standard stock solutions ... [Pg.109]

Pentadecanoic acid (PDA internal standard), stock solution 1 mg/ml in methanol. Dissolve 100 mg of PDA in 100 ml of methanol in a volumetric flask. Store refrigerated. Stable for 1 month. [Pg.143]

Internal standard stock solution weigh 33 mgofthe 18-methyl-C19 0 methylester and dissolve it in 50 ml of chloroform (approximately 2 mmol/1, store at 6°C). [Pg.211]

Maintenance records of reference standards, stock standard solutions, and working standards are not complete, and a method of handling these standards is not properly documented. Storage of stock and working standards, labeling of all standards, and a plan for disposal are not well defined. [Pg.120]

Standard stock solution in MeOH then diluted with mobile phase Sample dissolved in ACN then with water then with mobile phase LOD 0.12 /ig/ml LOQ 0.39 g/ml Rec 99.62% [31]... [Pg.96]

Standard stock standard in MeOH then diluted with... [Pg.109]

Standard stock standard in MeOH then diluted with MeOH water = 50 50 Sample LLE sample added with 500 [A of 50 mM ammonium acetate buffer (pH 6.8), then with 2 ml diethyl ether. Dried organic residue was reconstituted in 50 [A of 0.1% (v/v) formic acid in ACN then with 50 [A of 0.1% formic acid in water LOD not reported [50] LOQ 10 pg/ml Rec 61.5-68.6%... [Pg.110]


See other pages where Stock standards is mentioned: [Pg.1079]    [Pg.1184]    [Pg.1185]    [Pg.1186]    [Pg.576]    [Pg.107]    [Pg.1322]    [Pg.1348]    [Pg.1453]    [Pg.1454]    [Pg.1455]    [Pg.603]    [Pg.16]    [Pg.284]    [Pg.706]    [Pg.295]    [Pg.1058]    [Pg.69]    [Pg.300]   
See also in sourсe #XX -- [ Pg.11 ]




SEARCH



© 2024 chempedia.info