Spectrometry/spectroscopy coupled

Numerous methods have been pubUshed for the determination of trace amounts of tellurium (33—42). Instmmental analytical methods (qv) used to determine trace amounts of tellurium include atomic absorption spectrometry, flame, graphite furnace, and hydride generation inductively coupled argon plasma optical emission spectrometry inductively coupled plasma mass spectrometry neutron activation analysis and spectrophotometry (see Mass spectrometry Spectroscopy, optical). Other instmmental methods include polarography, potentiometry, emission spectroscopy, x-ray diffraction, and x-ray fluorescence. 

In 1C, the election-detection mode is the one based on conductivity measurements of solutions in which the ionic load of the eluent is low, either due to the use of eluents of low specific conductivity, or due to the chemical suppression of the eluent conductivity achieved by proper devices (see further). Nevertheless, there are applications in which this kind of detection is not applicable, e.g., for species with low specific conductivity or for species (metals) that can precipitate during the classical detection with suppression. Among the techniques that can be used as an alternative to conductometric detection, spectrophotometry, amperometry, and spectroscopy (atomic absorption, AA, atomic emission, AE) or spectrometry (inductively coupled plasma-mass spectrometry, ICP-MS, and MS) are those most widely used. Hence, the wide number of techniques available, together with the improvement of stationary phase technology, makes it possible to widen the spectrum of substances analyzable by 1C and to achieve extremely low detection limits. 

Hi) Methods based on mass spectrometry Spark-source mass spectrometry Glow-discharge mass spectrometry Inductively coupled-plasma mass spectrometry Electro-thermal vaporization-lCP-MS Thermal-ionization mass spectrometry Accelerator mass spectrometry Secondary-ion mass spectrometry Secondary neutral mass spectrometry Laser mass spectrometry Resonance-ionization mass spectrometry Sputter-initiated resonance-ionization spectroscopy Laser-ablation resonance-ionization spectroscopy... 

Hulmston, P. and Hutton, R.C., Analytical capabilities of electrothermal vaporisation-inductively coupled plasma-mass spectrometry. Spectroscopy, 6(1) (1991) 35. 

When decomposition is evidently not simple, with two or more processes being observed to overlap, sufficient information must be obtained to enable the contributions from each of the participating reactions, including secondary reactions between products, to be distinguished. Use of mass spectrometry or Fourier transform infrared spectroscopy coupled with thermogravimetry (see below) allows the evolution of individual gaseous species to be measured as functions of time or temperature. 

Hence, it is important to have test methods that can determine metals, both at trace levels and at major concentrations. Thus test methods have evolved that are used for the determination of specific metals as well as the multielement methods of determination using techniques such as atomic absorption spectrometry, inductively coupled plasma atomic emission spectrometry, and X-ray fluorescence spectroscopy. 

Keywords Trace elements Radionuclides Environment Water Soil Aerosol Plant Neutron activation analysis Atomic absorption spectrometry Inductively coupled plasma-atomic emission spectroscopy Inductively coupled plasma-mass spectrometry X-ray fluorescence Electrochemical methods Speciation... 

Jockusch, R.A. Bian, Q. Talbot, F.O. Forbes, M.W. Development and characterization of laser induced fluorescence spectroscopy coupled with ion trap mass spectrometry, Proc. 56th ASMS Conf. on Mass Spectrometry and Allied Topics, Denver, CO 2008. 

Inductively Coupled Plasma. Atomic Fluorescence Spectrometry. Atomic Mass Spectrometry Inductively Coupled Plasma. Chemiluminescence Liquid-Phase. Enzymes Enzyme-Based Electrodes. Fluorescence Instrumentation. Ion-Selective Electrodes Overview. Optical Spectroscopy Detection Devices. Sensors Overview. Voltammetry Overview. 

See also Activation Analysis Neutron Activation. Atomic Emission Spectrometry Inductively Coupled Plasma. Atomic Mass Spectrometry Inductively Coupled Plasma. Chemometrics and Statistics Expert Systems. Glasses. Microscopy Applications Forensic. Optical Spectroscopy Refractometry and Reflectometry. X-Ray Fluorescence and Emission Energy Dispersive X-Ray Fluorescence. 

See also Atomic Absorption Spectrometry Principles and Instrumentation. Atomic Emission Spectrometry Inductively Coupled Plasma. Cosmetics and Toiletries. Derivatization of Analytes. Electrophoresis Is-otachophoresls. Environmental Analysis. Enzymes Overview. Extraction Supercritical Fluid Extraction Solid-Phase Extraction Solid-Phase Microextraction. Ion Exchange Ion Chromatography Applications. Liquid Chromatography Reversed Phase Liquid Chromatography-Mass Spectrometry. Nuclear Magnetic Resonance Spectroscopy - Applicable Elements Carbon-13 Phosphorus-31. Perfumes. 

See also Atomic Absorption, Methods and Instrumentation Atomic Absorption, Theory Atomic Emission, Methods and Instrumentation Biomedical Applications of Atomic Spectroscopy Forensic Science, Applications of Atomic Spectroscopy Hyphenated Techniques, Applications of in Mass Spectrometry Inductively Coupled Plasma Mass Spectrometry, Methods Inorganic Chemistry, Applications of Mass Spectrometry. 

Cairns,W. R. L., McLeod, C.W., and Hancock, B. (1997). Atomic spectroscopy perspectives Determination of platinum in human serum by flow injection inductively coupled plasma-mass spectrometry. Spectroscopy 12(4), 16. 

An inductively coupled plasma (ICP) is a very high temperature, up to 8,000K, excitation source that efficiently desolvates, vaporizes, excites, and ionizes atoms. ICP sources are used to excite atoms for atomic emission spectroscopy and to ionize atoms for mass spectrometry. Inductively coupled... 

The section on Spectroscopy has been retained but with some revisions and expansion. The section includes ultraviolet-visible spectroscopy, fluorescence, infrared and Raman spectroscopy, and X-ray spectrometry. Detection limits are listed for the elements when using flame emission, flame atomic absorption, electrothermal atomic absorption, argon induction coupled plasma, and flame atomic fluorescence. Nuclear magnetic resonance embraces tables for the nuclear properties of the elements, proton chemical shifts and coupling constants, and similar material for carbon-13, boron-11, nitrogen-15, fluorine-19, silicon-19, and phosphoms-31. 

To examine a sample by inductively coupled plasma mass spectrometry (ICP/MS) or inductively coupled plasma atomic-emission spectroscopy (ICP/AES) the sample must be transported into the flame of a plasma torch. Once in the flame, sample molecules are literally ripped apart to form ions of their constituent elements. These fragmentation and ionization processes are described in Chapters 6 and 14. To introduce samples into the center of the (plasma) flame, they must be transported there as gases, as finely dispersed droplets of a solution, or as fine particulate matter. The various methods of sample introduction are described here in three parts — A, B, and C Chapters 15, 16, and 17 — to cover gases, solutions (liquids), and solids. Some types of sample inlets are multipurpose and can be used with gases and liquids or with liquids and solids, but others have been designed specifically for only one kind of analysis. However, the principles governing the operation of inlet systems fall into a small number of categories. This chapter discusses specifically substances that are normally liquids at ambient temperatures. This sort of inlet is the commonest in analytical work. 

ICP/MS. inductively coupled plasma and mass spectrometry used as a combined technique ICR. ion cyclotron resonance (spectroscopy)... 

---