Solubility chlorobenzene

The commercial product, m.p. 53-55°, may be used. Alternatively the methyl -naphthyl ketone may be prepared from naphthalene as described in Section IV,136. The Friedel - Crafts reaction in nitrobenzene solution yields about 90 per cent, of the p-ketone and 10 per cent, of the a-ketone in carbon disulphide solution at — 15°, the proportions ore 65 per cent, of the a- and 35 per cent, of the p-isomer. With chlorobenzene ns the reaction medium, a high proportion of the a-ketone is also formed. Separation of the liquid a-isomer from the solid p-isomer in Such mixtures (which remain liquid at the ordinary temp>erature) is readily effected through the picrates the picrate of the liquid a-aceto compound is less soluble and the higher melting. 

Characteristics of the system as nitrating reagents Wibaut, who introduced the competitive method for determining reactivities (his experiments with toluene, benzene and chlorobenzene were performed under heterogeneous conditions and were not successful), pointed out that solutions of nitric acid in acetic anhydride are useful in making comparisons of reactivities because aromatic compounds are soluble in them. ... 

Chemical Properties and Reactivity. LLDPE is a saturated branched hydrocarbon. The most reactive parts of LLDPE molecules are the tertiary CH bonds in branches and the double bonds at chain ends. Although LLDPE is nonreactive with both inorganic and organic acids, it can form sulfo-compounds in concentrated solutions of H2SO4 (>70%) at elevated temperatures and can also be nitrated with concentrated HNO. LLDPE is also stable in alkaline and salt solutions. At room temperature, LLDPE resins are not soluble in any known solvent (except for those fractions with the highest branching contents) at temperatures above 80—100°C, however, the resins can be dissolved in various aromatic, aUphatic, and halogenated hydrocarbons such as xylenes, tetralin, decalin, and chlorobenzenes. 

Solubility and Solvent Resistance. The majority of polycarbonates are prepared in methylene chloride solution. Chloroform, i7j -l,2-dichloroethylene, yy -tetrachloroethane, and methylene chloride are the preferred solvents for polycarbonates. The polymer is soluble in chlorobenzene or o-dichlorobenzene when warm, but crystallization may occur at lower temperatures. Methylene chloride is most commonly used because of the high solubiUty of the polymer (350 g/L at 25°C), and because this solvent has low flammabiUty and toxicity. Nonhalogenated solvents include tetrahydrofuran, dioxane, pyridine, and cresols. Hydrocarbons (qv) and aUphatic alcohols, esters (see Esters, organic), or ketones (qv) do not dissolve polycarbonates. Acetone (qv) promotes rapid crystallization of the normally amorphous polymer, and causes catastrophic failure of stressed polycarbonate parts. 

A Methylamino)phenol. This derivative, also named 4-hydroxy-/V-methy1ani1ine (19), forms needles from benzene which are slightly soluble in ethanol andinsoluble in diethyl ether. Industrial synthesis involves decarboxylation of A/-(4-hydroxyphenyl)glycine [122-87-2] at elevated temperature in such solvents as chlorobenzene—cyclohexanone (184,185). It also can be prepared by the methylation of 4-aminophenol, or from methylamiae [74-89-5] by heating with 4-chlorophenol [106-48-9] and copper sulfate at 135°C in aqueous solution, or with hydroquinone [123-31 -9] 2l. 200—250°C in alcohoHc solution (186). 

Perhalates. Whereas silver perchlorate [7783-93-9] AgClO, and silver periodate [15606-77-6] AglO, are well known, silver perbromate [54494-97-2] AgBrO, has more recendy been described (18). Silver perchlorate is prepared from silver oxide and perchloric acid, or by treating silver sulfate with barium perchlorate. Silver perchlorate is one of the few silver salts that is appreciably soluble in organic solvents such as glycerol, toluene, and chlorobenzene. 

Solubility. One of PVP s more outstanding attributes is its solubility in both water and a variety of organic solvents. PVP is soluble in alcohols, acids, ethyl lactate, chlorinated hydrocarbons, amines, glycols, lactams, and nitroparaffins. SolubiUty means a minimum of 10 wt % PVP dissolves at room temperature (moisture content of PVP can influence solubiUty). PVP is insoluble in hydrocarbons, ethers, ethyl acetate, j -butyl-4-acetate, 2-butanone, acetone, cyclohexanone, and chlorobenzene. Both solvent polarity and H-bonding strongly influence solubiUty (77). 

Diaminonaphthalene [2243-62-1 ] M 158.2, m 190°, pK 4.12. Rerystd from boiling H2O, but is wasteful due to poor solubility. Boil in chlorobenzene (charcoal), filter hot and cool the filtrate. This gives colourless crystals. Dry in a vac till free from chlorobenzene (odour), and store away from light. 

Molybdenum insoluble compounds Molybdenum soluble compounds Monochloroacetic acid Monochlorobenzene (chlorobenzene) Monocrotophos Monomethyl aniline Monomethyl hydrazine Monomethylarsonic acid Morpholine... 

Trichloro- and dichloromethane, ether, dioxane, benzene, toluene, chlorobenzene, acetonitrile, or even pyridine itself has been employed to carry out the one-pot syntheses. Tliese solvents allow straightforward preparation of the salts. The temperature range between 0° and 20°C is usually employed and the salts formed are sufficiently soluble. In the case of slow reactions, selection of a solvent with a higher boiling point is prohtable since thermal instability of the A -(l-haloalkyl)heteroarylium halides has not been reported. Addition of water or an aqueous solution of sodium acetate does not cause a rapid decomposition of the salts so that this constitutes a useful step in the optimization of some procedures. 

Solvents for PTC should be nonhydroxylic and immiscible with water. CHCI3, CH2CI2, chlorobenzene, toluene, and acetonitrile are commonly employed. If the reactant is liquid, extra solvent is not required. Although chloroform and methylene chloride are favourable from a chemistry point of view, engineering considerations often lead to the choice of chlorobenzene (and toluene) because of their lower solubility in water and higher boiling point. 

Separations based upon differences in the chemical properties of the components. Thus a mixture of toluene and aniline may be separated by extraction with dilute hydrochloric acid the aniline passes into the aqueous layer in the form of the salt, aniline hydrochloride, and may be recovered by neutralisation. Similarly, a mixture of phenol and toluene may be separated by treatment with dilute sodium hydroxide. The above examples are, of course, simple apphcations of the fact that the various components fall into different solubility groups (compare Section XI,5). Another example is the separation of a mixture of di-n-butyl ether and chlorobenzene concentrated sulphuric acid dissolves only the n-butyl other and it may be recovered from solution by dilution with water. With some classes of compounds, e.g., unsaturated com-poimds, concentrated sulphuric acid leads to polymerisation, sulphona-tion, etc., so that the original component cannot be recovered unchanged this solvent, therefore, possesses hmited apph cation. Phenols may be separated from acids (for example, o-cresol from benzoic acid) by a c ute solution of sodium bicarbonate the weakly acidic phenols (and also enols) are not converted into salts by this reagent and may be removed by ether extraction or by other means the acids pass into solution as the sodium salts and may be recovered after acidification. Aldehydes, e.g., benzaldehyde, may be separated from liquid hydrocarbons and other neutral, water-insoluble liquid compounds by shal g with a solution of sodium bisulphite the iddehyde forms a solid bisulphite compound, which may be filtered off and decomposed with dilute acid or with sodium bicarbonate solution in order to recover the aldehyde. 

The success of this reaction was ascribed to the solubility of the chlorozinc intermediate, whereas other chloramine-T derivatives (e.g. the sodium salt) are insoluble. An alternative non-nitrene pathway was not eliminated from consideration. On the other hand, no aromatic substitution or addition, characteristic of a free sulphonyl nitrene (see below), took place on treatment of jV,lV-dichloromethanesulphonamides with zinc powder in benzene in the cold or on heating. The only product isolated was that of hydrogen-abstraction, methanesulphonamide 42>, which appears to be more characteristic of the behaviour of a sulphonyl nitrene-metal complex 36,37). Photolysis of iV.iV-dichloromethanesulphonamide, or dichloramine-B, or dichloramine-T in benzene solution led to the formation of some unsubstituted sulphonamide and some chlorobenzene but no product of addition of a nitrene to benzene 19>. 

The van t Hoff equation also has been used to describe the temperature effect on Henry s law constant over a narrow range for volatile chlorinated organic chemicals (Ashworth et al. 1988) and chlorobenzenes, polychlorinated biphenyls, and polynuclear aromatic hydrocarbons (ten Hulscher et al. 1992, Alaee et al. 1996). Henry s law constant can be expressed as the ratio of vapor pressure to solubility, i.e., pic or plx for dilute solutions. Note that since H is expressed using a volumetric concentration, it is also affected by the effect of temperature on liquid density whereas kH using mole fraction is unaffected by liquid density (Tucker and Christian 1979), thus... 

Aquan-Yuen, M., Mackay, D., Shiu, W.Y. (1979) Solubility of hexane, phenanthrene, chlorobenzene, and p-dichlorobenzene in aqueous electrolyte solutions. J. Chem. Eng. Data 24, 30-34. 

Oleszek-Kudlak, S., Shibata, E., Nakamura, T. (2004) The effects of temperature and inorganic salts on the aqueous solubility of selected chlorobenzenes. J. Chen. Eng. Data 49, 570-575. 

Styrene-containing polymer is completely soluble in common solvents such as CHCI3, THF, xylene, or chlorobenzene and can be spin cast as thin films that are easily cross-linked... 

Route B of this process may be substantially improved in terms of yield and product quality (purity) of the resulting triarylaminoarylcarbonium pigment. To this end, the solution of the free dye base is treated with an excess of aqueous sulfuric acid (20 to 40% ) in a solvent such as chlorobenzene or an aromatic amine. This method produces the sulfate of the basic dye, which is insoluble in this medium, together with the soluble sulfates of the primary aromatic amines, which can therefore easily be separated. The isolated sulfate of the basic dye is then washed and in dry or wet condition monosulfonated with 85 to 100% sulfuric acid. Based on the dye base sulfate, this step affords 96 to 98% yield, compared to only 83 to 89% achieved by the previously described method. The entire synthesis, including the intermediate isolation of the triarylaminoarylmethane sulfate, may also be performed by continuous process [3]. 

Increasing the apparent water solubilities of low-polarity organic compounds such as trichloroethene, naphthalene, anthracene, chlorobenzene, and DDT [147]. 

Fig. 2 Solubility of 5a in toluene ( ), chlorobenzene , dioxane ( ), and -octane (A) as a function of temperature...

---