Solid dioxide

The solid dioxide evaporates congruently at all temperatures. Above 2800 K, the thoria in equilibrium with Th(l) showed a measurable but thermodynamically insignificant hypostoichiometiy to a composition of ThOi ggg. The "effective" pressure, (/.e. the pressure assuming the vapour is composed entirely of Th02) is given by the equation login Pe /l>3r = - 35500/r + 8.265. 

The only thermodynamically stable solid oxide of Th is its dioxide its monoxide disproportionates to the metal and dioxide. The vaporization behavior of ThOj has been investigated and the vapor species are Th02(g), ThO(g) and Th(g) (Ackermann and Rauh 1973b). The thermodynamic properties of ThO(g) have also been studied (Ackermann and Chandrasekharaiah 1974). The free energies of formation of the gaseous monoxide, dioxide and solid dioxide are given in table 27. 

Trichloroethanoic acid, CCI3COOH. A crystalline solid which rapidly absorbs water vapour m.p. 58°C, b.p. 196-5" C. Manufactured by the action of chlorine on ethanoic acid at 160°C in the presence of red phosphorus, sulphur or iodine. It is decomposed into chloroform and carbon dioxide by boiling water. It is a much stronger acid than either the mono- or the dichloro-acids and has been used to extract alkaloids and ascorbic acid from plant and animal tissues. It is a precipitant for proteins and may be used to test for the presence of albumin in urine. The sodium salt is used as a selective weedkiller. 

Chromium dioxide. Cr02 (HjO plus O2 on Cr03 at high temperature). Black solid with the rutile structure forming chromates(IV) in solid stale reactions. Used in magnetic lap>es. 

Another indication of the probable incorrectness of the pressure melting explanation is that the variation of the coefficient of friction with temperature for ice is much the same for other solids, such as solid krypton and carbon dioxide [16] and benzophenone and nitrobenzene [4]. In these cases the density of the solid is greater than that of the liquid, so the drop in as the melting point is approached cannot be due to pressure melting. 

The white solid oxides MjO and M 0 are formed by direct union of the elements. The oxides MjO and the oxides M"0 of calcium down to radium have ionic lattices and are all highly basic they react exothermically with water to give the hydroxides, with acids to give salts, and with carbon dioxide to give carbonates. For example... 

Group II hydrogencarbonates have insufficient thermal stability for them to be isolated as solids. However, in areas where natural deposits of calcium and magnesium carbonates are found a reaction between the carbonate, water and carbon dioxide occurs ... 

Carbon dioxide is used in the manufacture of sodium carbonate by the ammonia-soda process, urea, salicyclic acid (for aspirin), fire extinguishers and aerated water. Lesser amounts are used to transfer heat generated by an atomic reactor to water and so produce steam and electric power, whilst solid carbon dioxide is used as a refrigerant, a mixture of solid carbon dioxide and alcohol providing a good low-temperature bath (195 K) in which reactions can be carried out in the laboratory. 

If the hydrogencarbonate is in solution and the cation is Ca or Mg. the insoluble carbonate is precipitated this reaction may be used, therefore, to remove hardness in water by precipitation of Ca or Mg ions.) The ease of decomposition of hydrogencar-bonates affords a test to distinguish between a hydrogencarbonate and a carbonate carbon dioxide is evolved by a hydrogencarbonate, but not by a carbonate, if it is heated, either as the solid or in solution, on a boiling water bath. 

Selenium dioxide is a volatile solid obtained when selenium is burnt in air or oxygen. It is very soluble in water, forming a solution of... 

Tellurium dioxide, Te02, is a white non-volatile solid obtained when tellurium is burnt in air. It is only slightly soluble in water but dissolves in alkalis to form salts. 

This occurs naturally as a white solid in various crystalline forms, in all of which six oxygen atoms surround each titanium atom. Titanium dioxide is important as a white pigment, because it is nontoxic. chemically inert and highly opaque, and can be finely ground for paint purposes it is often prepared pure by dissolving the natural form in sulphuric acid, hydrolysing to the hydrated dioxide and heating the latter to make the anhydrous form. 

Anhydrous titanium dioxide is only soluble with difficulty in hot concentrated sulphuric acid dilution allows the crystallisation of a sulphate of formula T10S04.H20, but it is doubtful if the titanyl cation TiO actually exists, either in solution or the solid. Certainly [TifHjOIn] does not exist, and solutions of titanyl salts may best be considered to contain ions [Ti(0H)2(H204)] . Titanium... 

The addition of concentrated sulphuric acid to a solid dichromate mixed with a chloride produces a red vapour, chromium(VI)dioxide dichloride, Cr02Cl2 (cf. sulphur dioxide dichloride, SO2CI2). Chromium(VI) dioxide dichloride reacts with water immediately ... 

Solid carbon dioxide (Dry Ice, Drikold) is employed when very low temperatures are required. If it is suspended in solvents, such as alcohol or a mixture of equal volumes of chloroform and carbon tetrachloride, temperatures down to — 50° can be easily attained. Lower temperatures still are reached if intimate mixtures of solid carbon dioxide and organic solvents are employed with ethyl alcohol, — 72° with... 

By cooling the solution in a freezing mixture (ice and salt, ice and calcium chloride, or solid carbon dioxide and ether). It must be borne in mind that the rate of crystal formation is inversely proportional to the temperature cooling to very low temperatures may render the mass... 

By adding a few lumps of solid carbon dioxide this produces a number of cold spots here and there, and assists the formation of crystals. 

For some purposes in the Grignard reaction) solid carbon dioxide, narketed as Dry Ice or Drikold, may be employed. 

The gas is dried by passage through wash bottles containing concentrated sulphuric acid. Alternatively and more simply, the technique (described below for n.valeric acid) utilising solid carbon dioxide (Dry Ice or Drikold) may be employed. 

Benzoates. Dissolve 0-5 g. of the amino acid in 10 ml. of 10 per cent, sodium bicarbonate solution and add 1 g. of benzoyl chloride. Shake the mixture vigorously in a stoppered test-tube remove the stopper from time to time since carbon dioxide is evolved. When the odour of benzoyl chloride has disappeared, acidify with dilute hydrochloric acid to Congo red and filter. Extract the solid with a little cold ether to remove any benzoic acid which may be present. RecrystaUise the benzoyl derivative which remains from hot water or from dilute alcohol. 

---