Silver ethylene oxidation

Direct Oxidation of Propylene to Propylene Oxide. Comparison of ethylene (qv) and propylene gas-phase oxidation on supported silver and silver—gold catalysts shows propylene oxide formation to be 17 times slower than ethylene oxide (qv) formation and the CO2 formation in the propylene system to be six times faster, accounting for the lower selectivity to propylene oxide than for ethylene oxide. Increasing gold content in the catalyst results in increasing acrolein selectivity (198). In propylene oxidation a polymer forms on the catalyst surface that is oxidized to CO2 (199—201). Studies of propylene oxide oxidation to CO2 on a silver catalyst showed a rate oscillation, presumably owing to polymerization on the catalyst surface upon subsequent oxidation (202). 

Catalysts. Silver and silver compounds are widely used in research and industry as catalysts for oxidation, reduction, and polymerization reactions. Silver nitrate has been reported as a catalyst for the preparation of propylene oxide (qv) from propylene (qv) (58), and silver acetate has been reported as being a suitable catalyst for the production of ethylene oxide (qv) from ethylene (qv) (59). The solubiUty of silver perchlorate in organic solvents makes it a possible catalyst for polymerization reactions, such as the production of butyl acrylate polymers in dimethylformamide (60) or the polymerization of methacrylamide (61). Similarly, the solubiUty of silver tetrafiuoroborate in organic solvents has enhanced its use in the synthesis of 3-pyrrolines by the cyclization of aHenic amines (62). 

Salts of neodecanoic acid have been used in the preparation of supported catalysts, such as silver neodecanoate for the preparation of ethylene oxide catalysts (119), and the nickel soap in the preparation of a hydrogenation catalyst (120). Metal neodecanoates, such as magnesium, lead, calcium, and zinc, are used to improve the adherence of plasticized poly(vinyl butyral) sheet to safety glass in car windshields (121). Platinum complexes using neodecanoic acid have been studied for antitumor activity (122). Neodecanoic acid and its esters are used in cosmetics as emoUients, emulsifiers, and solubilizers (77,123,124). Zinc or copper salts of neoacids are used as preservatives for wood (125). 

Catalyst Selectivity. Selectivity is the property of a catalyst that determines what fraction of a reactant will be converted to a particular product under specified conditions. A catalyst designer must find ways to obtain optimum selectivity from any particular catalyst. For example, in the oxidation of ethylene to ethylene oxide over metallic silver supported on alumina, ethylene is converted both to ethylene oxide and to carbon dioxide and water. In addition, some of the ethylene oxide formed is lost to complete oxidation to carbon dioxide and water. The selectivity to ethylene oxide in this example is defined as the molar fraction of the ethylene converted to ethylene oxide as opposed to carbon dioxide. 

Ethylene oxide (qv) was once produced by the chlorohydrin process, but this process was slowly abandoned starting in 1937 when Union Carbide Corp. developed and commercialized the silver-catalyzed air oxidation of ethylene process patented in 1931 (67). Union Carbide Corp. is stiU. the world s largest ethylene oxide producer, but most other manufacturers Hcense either the Shell or Scientific Design process. Shell has the dominant patent position in ethylene oxide catalysts, which is the result of the development of highly effective methods of silver deposition on alumina (29), and the discovery of the importance of estabUshing precise parts per million levels of the higher alkaU metal elements on the catalyst surface (68). The most recent patents describe the addition of trace amounts of rhenium and various Group (VI) elements (69). 

Ethylene oxide is produced in large, multitubular reactors cooled by pressurized boiling Hquids, eg, kerosene and water. Up to 100 metric tons of catalyst may be used in a plant. Typical feed stream contains about 30% ethylene, 7—9% oxygen, 5—7% carbon dioxide the balance is diluent plus 2—5 ppmw of a halogenated moderator. Typical reactor temperatures are in the range 230—300°C. Most producers use newer versions of the Shell cesium-promoted silver on alumina catalyst developed in the mid-1970s. 

Catalyst lifetime for contemporary ethylene oxide catalysts is 1—2 years, depending on the severity of service, ie, ethylene oxide production rate and absence of feed poisons, primarily sulfur compounds. A large percentage (>95%) of the silver in spent catalysts can be recovered and recycled the other components are usually discarded because of thek low values. 

Equation 1 is referred to as the selective reaction, equation 2 is called the nonselective reaction, and equation 3 is termed the consecutive reaction and is considered to proceed via isomerization of ethylene oxide to acetaldehyde, which undergoes rapid total combustion under the conditions present in the reactor. Only silver has been found to effect the selective partial oxidation of ethylene to ethylene oxide. The maximum selectivity for this reaction is considered to be 85.7%, based on mechanistic considerations. The best catalysts used in ethylene oxide production achieve 80—84% selectivity at commercially useful ethylene—oxygen conversion levels (68,69). 

Dehydrochlorination to Epoxides. The most useful chemical reaction of chlorohydrins is dehydrochlotination to form epoxides (oxkanes). This reaction was first described by Wurtz in 1859 (12) in which ethylene chlorohydria and propylene chlorohydria were treated with aqueous potassium hydroxide [1310-58-3] to form ethylene oxide and propylene oxide, respectively. For many years both of these epoxides were produced industrially by the dehydrochlotination reaction. In the past 40 years, the ethylene oxide process based on chlorohydria has been replaced by the dkect oxidation of ethylene over silver catalysts. However, such epoxides as propylene oxide (qv) and epichl orohydrin are stiU manufactured by processes that involve chlorohydria intermediates. 

For many years ethylene chlorohydrin was manufactured on a large iadustrial scale as a precursor to ethylene oxide, but this process has been almost completely displaced by the direct oxidation of ethylene to ethylene oxide over silver catalysts. However, siace other commercially important epoxides such as propylene oxide and epichlorohydrin cannot be made by direct oxidation of the parent olefin, chlorohydrin iatermediates are stiU important ia the manufacture of these products. 

The reaction is carried out over a supported metallic silver catalyst at 250—300°C and 1—2 MPa (10—20 bar). A few parts per million (ppm) of 1,2-dichloroethane are added to the ethylene to inhibit further oxidation to carbon dioxide and water. This results ia chlorine generation, which deactivates the surface of the catalyst. Chem Systems of the United States has developed a process that produces ethylene glycol monoacetate as an iatermediate, which on thermal decomposition yields ethylene oxide [75-21-8]. 

Ethylene oxide [75-21-8] was first prepared in 1859 by Wurt2 from 2-chloroethanol (ethylene chlorohydrin) and aqueous potassium hydroxide (1). He later attempted to produce ethylene oxide by direct oxidation but did not succeed (2). Many other researchers were also unsuccesshil (3—6). In 1931, Lefort achieved direct oxidation of ethylene to ethylene oxide using a silver catalyst (7,8). Although early manufacture of ethylene oxide was accompHshed by the chlorohydrin process, the direct oxidation process has been used almost exclusively since 1940. Today about 9.6 x 10 t of ethylene oxide are produced each year worldwide. The primary use for ethylene oxide is in the manufacture of derivatives such as ethylene glycol, surfactants, and ethanolamines. 

Silver-containing catalysts are used exclusively in all commercial ethylene oxide units, although the catalyst composition may vary considerably (129). Nonsdver-based catalysts such as platinum, palladium, chromium, nickel, cobalt, copper ketenide, gold, thorium, and antimony have been investigated, but are only of academic interest (98,130—135). Catalysts using any of the above metals either have very poor selectivities for ethylene oxide production at the conversion levels required for commercial operation, or combust ethylene completely at useful operating temperatures. 

Electrochemical Process. Several patents claim that ethylene oxide is produced ia good yields ia addition to faradic quantities of substantially pure hydrogen when water and ethylene react ia an electrochemical cell to form ethylene oxide and hydrogen (206—208). The only raw materials that are utilized ia the ethylene oxide formation are ethylene, water, and electrical energy. The electrolyte is regenerated in situ ie, within the electrolytic cell. The addition of oxygen to the ethylene is activated by a catalyst such as elemental silver or its compounds at the anode or its vicinity (206). The common electrolytes used are water-soluble alkah metal phosphates, borates, sulfates, or chromates at ca 22—25°C (207). The process can be either batch or continuous (see Electrochemicalprocessing). 

Unsteady-State Direct Oxidation Process. Periodic iatermption of the feeds can be used to reduce the sharp temperature gradients associated with the conventional oxidation of ethylene over a silver catalyst (209). Steady and periodic operation of a packed-bed reactor has been iavestigated for the production of ethylene oxide (210). By periodically varyiag the inlet feed concentration of ethylene or oxygen, or both, considerable improvements ia the selectivity to ethylene oxide were claimed. 

Oxidation catalysts are either metals that chemisorb oxygen readily, such as platinum or silver, or transition metal oxides that are able to give and take oxygen by reason of their having several possible oxidation states. Ethylene oxide is formed with silver, ammonia is oxidized with platinum, and silver or copper in the form of metal screens catalyze the oxidation of methanol to formaldehyde. Cobalt catalysis is used in the following oxidations butane to acetic acid and to butyl-hydroperoxide, cyclohexane to cyclohexylperoxide, acetaldehyde to acetic acid and toluene to benzoic acid. PdCh-CuCb is used for many liquid-phase oxidations and V9O5 combinations for many vapor-phase oxidations. 

The main route to ethylene oxide is oxygen or air oxidation of ethylene over a silver catalyst. The reaction is exothermic heat control is important ... 

There are many ways to produce acetaldehyde. Historically, it was produced either hy the silver-catalyzed oxidation or hy the chromium activated copper-catalyzed dehydrogenation of ethanol. Currently, acetaldehyde is obtained from ethylene hy using a homogeneous catalyst (Wacker catalyst). The catalyst allows the reaction to occur at much lower temperatures (typically 130°) than those used for the oxidation or the dehydrogenation of ethanol (approximately 500°C for the oxidation and 250°C for the dehydrogenation). 

Ethylene oxide, the simplest epoxide, is an intermediate in the manufacture of both ethylene glycol, used for automobile antifreeze, and polyester polymers. More than 4 million tons of ethylene oxide is produced each year in the United States by air oxidation of ethylene over a silver oxide catalyst at 300 °C. This process is not useful for other epoxides, however, and is of little value in the laboratory. Note that the name ethylene oxide is not a systematic one because the -ene ending implies the presence of a double bond in the molecule. The name is frequently used, however, because ethylene oxide is derived pom ethylene by addition of an oxygen atom. Other simple epoxides are named similarly. The systematic name for ethylene oxide is 1,2-epoxyethane. 

Epoxides such as ethylene oxide and higher olefin oxides may be produced by the catalytic oxidation of olefins in gas-liquid-particle operations of the slurry type (S7). The finely divided catalyst (for example, silver oxide on silica gel carrier) is suspended in a chemically inactive liquid, such as dibutyl-phthalate. The liquid functions as a heat sink and a heat-transfer medium, as in the three-phase Fischer-Tropsch processes. It is claimed that the process, because of the superior heat-transfer properties of the slurry reactor, may be operated at high olefin concentrations in the gaseous process stream without loss with respect to yield and selectivity, and that propylene oxide and higher... 

M. Stoukides, and C.G. Vayenas, The effect of Electrochemical Oxygen Pumping on the Rate and Selectivity of Ethylene Oxidation on Polycrystalline Silver, J. Catal. 70, 137-146(1981). 

Ethylene is currently converted to ethylene oxide with a selectivity of more than 80% under commercial conditions. Typical operating conditions are temperatures in the range 470 to 600 K with total pressures of 1 to 3 Mpa. In order to attain high selectivity to ethylene oxide (>80%), alkali promoters (e.g Rb or Cs) are added to the silver catalyst and ppm levels of chlorinated hydrocarbons (moderators) are added to the gas phase. Recently the addition of Re to the metal and of ppm levels of NOx to the gas phase has been found to further enhance the selectivity to ethylene oxide. 

Ethylene is selectively oxidized to ethylene oxide using a silver-based catalyst in a fixed-bed reactor. Ethylene and oxygen are supplied from the gas phase and ethylene oxide is removed by it. The catalyst is stationary. Undesired, kinetically determined by-products include carbon monoxide and water. Ideally, a pure reactant is converted to one product with no by-products. 

C05-0092. Ethylene oxide is produced industrially from the reaction of ethylene with oxygen at atmospheric pressure and 280 °C, in the presence of a silver catalyst ... 

The catalytic route, however, is simple and clean, although it does produce a small amount of CO2. Using silver, promoted by small amounts of chlorine, as the catalyst, ethylene oxide is formed directly from C2H4 and O2 at a selectivity of around 90%, with about 10% of the ethylene ending up as CO2. Nowadays all production facilities for ethylene oxide use catalysts. 

---