Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Service prevention techniques

Dr. Reese is also the principal author of the Handbook ofOSHA Construction Safety and Health (Second Edition) Material Handling Systems Designingfor Safety and Health Annotated Dictionary of Construction Safety and Health, Occupational Health and Safety Management A Practical Approach Office Building Safety and Health Accident/Incident Prevention Techniques Industrial Safety and Health for Goods and Materials Services Industrial Safety and Health for Infrastructure Services Industrial Safety and Health for Administrative Services and Industrial Safety and Health for People-Oriented Services. [Pg.537]

While preventive maintenance is concerned with regularly testing, and reconditioning equipment to prevent failures in service and premature deterioration, it follows that predictive maintenance procedures are concerned with the ability to predict when the equipment will fail and then developing schedules to implement timely repairs. Predictive maintenance does not imply that with the use of these techniques, failure modes in equipment can be prevented rather, it suggests that the occurrence of failure can be predicted and thus planned for. An appropriate example would be the inspection and change of a major compressor face-type oil seal where random heat checking (FM) has been observed over the years. [Pg.1044]

Metallic corrosion is an electrochemical process associated with the flow of current between surface sites having a difference in electrochemical potential. The assessment and evaluation of organic coatings to prevent metal corrosion has traditionally been accomplished through salt fog testing (ASTM B-117) and long term exposure tests in particular service environments. Electrochemical techniques have often been considered (, but are not routinely employed in practice. [Pg.48]

Yet, corrosion engineering and science is no longer an empirical art dissecting a large corrosion problem into its basic mechanisms allows the use of quite sophisticated electrochemical techniques to accomplish satisfactory results. On that positive side, there is real satisfaction and economic gain in designing a component that can resist punishing service conditions under which other parts fail. In some cases, we cannot completely prevent corrosion, but we can try to avoid obsolescence of the component due to corrosion. [Pg.2172]

These two questions are partly interdependent and are also dependent upon the methods chosen for measuring cortisol and other adrenocortical steroids outside the class of sex hormones and their metabolites. Thus, each clinical chemist will want to reach an optimal strategy based on the size and budget of his laboratory and on many other local factors. It is sometimes valuable to use a good commercial service laboratory for certain types of measurement whose inclusion in the routine armamentarium of the laboratory would prevent the introduction of other more desirable types of measurement. In any event he will wish to minimize the number of different basic techniques and types of equipment to be used unless he can afford to allocate a very sizable number of staff to steroid work. [Pg.81]

FM 8-10-7. Health Service Support in a Nuclear, Biological, and Chemical Environment. April 1993 with change 1 dated Nov 96. This manual provides doctrine and tactics, techniques, and procedures for medical units and personnel operating in a nuclear, biological, and chemical (NBC) environment This manual is intended for all echelons of health service support (HSS). It discusses the operational aspects of the following HSS activities Medical treatment, medical evacuation, health service logistics, combat stress control, and preventive medicine, veterinary, dental, and medical laboratory services. [Pg.286]

Powers of the Technical Inspection Service. The institutions for statutory accident insurance and prevention and their Technical Inspection Service are also responsible for the surveillance of the Hazardous Substances Regulation and its Technical Rules. Both surveillance authorities also offer special support for small and m um sized enterprises with respect to training and measurement techniques. [Pg.102]

For the execution of their tasks, inspectors have the same powers as the local police. They may issue orders and make use of compulsory measures/sanctions under the relevant State laws. Normally this covers a remedy of the situation at the expense of the employer or the establishment and/or the fixing of fines. Additionally, they can order the suspension/cessation of production or initiate ongoing penalties. The institutions for statutory accident insurance and prevention and their Technical Inspection Service are also responsible for the surveillance of the Hazardous Substances Regulation and its Technical Rules. As well as this, the BG may also require higher mandatory contributions from the employer. Both surveillance authorities offer special support for small and medium sized enterprises with respect to training and measurement techniques. [Pg.190]

In mildly corrosive applications it often pays to fabricate the packing support from stainless steel, even when carbon steel is satisfactory for the packing. This prevents localized corrosion that can puncture holes in the support, resulting in downward migration of packings. One service where this technique is commonly applied is in natural gas plant glycol-regeneration stills (84). [Pg.213]

Other techniques sometimes used to prevent plugging at the relief valve base include (98a) using a liquid seal, steam tracing, and heating (from outside). The last two are particularly useful if the plugging can be caused by freezing. The reliability and effectiveness of any specific technique for a specific service must be carefully evaluated. [Pg.245]

Gas mask phobia may be categorized as a form of claustrophobia occasioned by the wearing of a protective mask. In psychiatric terms, it could be defined as a simple phobia.1 Symptoms include hyperventilation, sweating, and panic. These usually cause the eyepieces to fog up, leading to an inability to see, move, shoot, and communicate. Many soldiers either break the seal and lift the mask off the face, or remove the mask completely. Prevention and initial treatment of gas mask phobia and malingering should be command issues, handled though the NBC (nuclear, biological, and chemical) officers recalcitrant cases may be referred to the mental health service for further evaluation and desensitization techniques. [Pg.393]


See other pages where Service prevention techniques is mentioned: [Pg.382]    [Pg.236]    [Pg.246]    [Pg.845]    [Pg.139]    [Pg.31]    [Pg.235]    [Pg.542]    [Pg.648]    [Pg.102]    [Pg.257]    [Pg.39]    [Pg.112]    [Pg.170]    [Pg.244]    [Pg.284]    [Pg.574]    [Pg.245]    [Pg.315]    [Pg.228]    [Pg.201]    [Pg.578]    [Pg.199]    [Pg.408]    [Pg.182]    [Pg.825]    [Pg.1625]    [Pg.391]    [Pg.66]    [Pg.356]    [Pg.349]    [Pg.10]    [Pg.168]    [Pg.16]    [Pg.224]    [Pg.17]    [Pg.677]    [Pg.764]   
See also in sourсe #XX -- [ Pg.203 ]




SEARCH



Prevention Services

© 2024 chempedia.info