Sequestration,

As the world population rises and with it the demand for energy, carbon sequestration will almost certainly become a key issue. This is because coal - a high-carbon fuel in plentiful supply, but one that yields more carbon dioxide than either oil or natural gas - is expected to play an increasingly important role as a primary source of energy. 

Early studies suggested that cGMP could activate Ca2+-pumping mechanisms in rat aortic VSMC to reduce [Ca +Ji (Rashatwar et al, 1987 Furukawa and Nakamura, 1987 Vrolixetfl/., 1988 Raeymaekerseffl/., 

The role of NO and cGMP in the hyperpolarization of the smooth muscle cell membrane has been the subject of much scrutiny and controversy in the last few years. On the one hand, there is a wealth of evidence that supports the notion that in some smooth muscle cell preparations, NO or cGMP activates BK channels. However, in a few of these instances, NO has been found to activate BK channels independent of cGMP elevations. And then there are some smooth muscle cell types where BK channels appear to play no role in NO- or cGMP-mediated relaxation. These findings have led to the realization that there appears to be cell-specific effects for NO and cGMP for the activation of BK channels. These findings are summarized here. 

---

The control of carbon dioxide emission from burning fossil fuels in power plants or other industries has been suggested as being possible with different methods, of which sequestration (i.e., collecting CO2 and injecting it to the depth of the seas) has been much talked about recently. Besides of the obvious cost and technical difficulties, this would only store, not dispose of, CO2 (although natural processes in the seas eventually can form carbonates, albeit only over very long periods of time). 

Organic polymer glass Organic sequestrants Organic sulfides Organic sulfur... 

Additional nonnutrient additives iaclude sequestrants to provide ingredient separatioa and stabili2ers such as gums. Spices, essential oils, oleoresias, synthetic flavotings, and adjuvants are also used ia pet foods. 

Concentrations above 0.3% form a gel with borate which is reversible upon the subsequent addition of mannitol (a sequestrant for borate) or of acid. Usefiil combinations are formed with carrageenan (63) and xanthan gum (64) and agar. In many appHcations, it is used in combination with these gums at considerable cost savings. 

Complex Ion Formation. Phosphates form water-soluble complex ions with metallic cations, a phenomenon commonly called sequestration. In contrast to many complexing agents, polyphosphates are nonspecific and form soluble, charged complexes with virtually all metallic cations. Alkali metals are weakly complexed, but alkaline-earth and transition metals form more strongly associated complexes (eg, eq. 16). Quaternary ammonium ions are complexed Htde if at all because of their low charge density. The amount of metal ion that can be sequestered by polyphosphates generally increases... 

Sequestration forms the basis for detergent and water-treatment appHcations of polyphosphates. Sequestration of hardness ions by sodium tripolyphosphate used in detergent formulations prevents the precipitation of surfactants by the hardness ions. Sodium polyphosphate glass (SHMP) may be added to water system to prevent the formation of calcium or magnesium scales by reducing the activity of the hardness ions. However, if the ratio of cation to polyphosphate is too high at a given pH, insoluble precipitates such as may result instead of the soluble polyphosphate complexes. The... 

Alkyl or aryl phosphonates, which contain a carbon—phosphoms bond, are comparatively more stable. They are of interest as antiscaling additives and corrosion inhibitors for cooling towers and heat exchangers (see Dispersants Water, industrial water treatment), surfactants (qv), sequestrants, and textile-treating agents. Trialkyl phosphites are usehil as esterification (qv) reagents. 

Phosphonic acid is an intermediate in the production of alkylphosphonates that are used as herbicides and as water treatment chemicals for sequestration, scale inhibition, deflocculation, and ion-control agents in oil weUs, cooling tower waters, and boiler feed waters. For example, aqueous phosphonic acid reacts with formaldehyde and ammonium chloride in the presence of hydrochloric acid to yield aminotri(methylenephosphonic acid) [6419-19-8]. 

Organophosphoms compounds, primarily phosphonic acids, are used as sequestrants, scale inhibitors, deflocculants, or ion-control agents in oil wells, cooling-tower waters, and boiler-feed waters. Organophosphates are also used as plasticizers and flame retardants in plastics and elastomers, which accounted for 22% of PCl consumed. Phosphites, in conjunction with Hquid mixed metals, such as calcium—zinc and barium—cadmium heat stabilizers, function as antioxidants and stabilizer adjutants. In 1992, such phosphoms-based chemicals amounted to slightly more than 6% of all such plastic additives and represented 8500 t of phosphoms. Because PVC production is expected to increase, the use of phosphoms additive should increase 3% aimually through 1999. 

Bile Acid Sequestrants. The bile acid binding resins, colestipol [26658424] and cholestyramine, ate also effective in controlling semm cholesterol levels (150). Cholestyramine, a polymer having mol wt > ICf, is an anion-exchange resin. It is not absorbed in the gastrointestinal tract, is not affected by digestive enzymes, and is taken orally after being suspended in water (151). 

Deprotonation of enols of P-diketones, not considered unusual at moderate pH because of their acidity, is faciUtated at lower pH by chelate formation. Chelation can lead to the dissociation of a proton from as weak an acid as an aUphatic amino alcohol in aqueous alkaU. Coordination of the O atom of triethanolamine to Fe(III) is an example of this effect and results in the sequestration of iron in 1 to 18% sodium hydroxide solution (Fig. 7). Even more striking is the loss of a proton from the amino group of a gold chelate of ethylenediamine in aqueous solution (17). 

The product is equal to the equilibrium constant X for the reaction shown in equation 30. It is generally considered that a salt is soluble if > 1. Thus sequestration or solubilization of moderate amounts of metal ion usually becomes practical as X. approaches or exceeds one. For smaller values of X the cost of the requited amount of chelating agent may be prohibitive. However, the dilution effect may allow economical sequestration, or solubilization of small amounts of deposits, at X values considerably less than one. In practical appHcations, calculations based on concentration equihbrium constants can be used as a guide for experimental studies that are usually necessary to determine the actual behavior of particular systems. 

Concentration Control. Sequestration, solubilization, and buffering depend on the concentration control feature of chelation. Traces of metal ions are almost universally present in Hquid systems, often arising from the materials of the handling equipment if not introduced by the process materials. Despite very low concentrations, some trace metals produce undesirable effects such as coloration or instabiHty. 

Many reactions catalyzed by the addition of simple metal ions involve chelation of the metal. The familiar autocatalysis of the oxidation of oxalate by permanganate results from the chelation of the oxalate and Mn (III) from the permanganate. Oxidation of ascorbic acid [50-81-7] C HgO, is catalyzed by copper (12). The stabilization of preparations containing ascorbic acid by the addition of a chelant appears to be negative catalysis of the oxidation but results from the sequestration of the copper. Many such inhibitions are the result of sequestration. Catalysis by chelation of metal ions with a reactant is usually accomphshed by polarization of the molecule, faciUtation of electron transfer by the metal, or orientation of reactants. 

Electrodeposition of Metals. Citric acid and its salts are used as sequestrants to control deposition rates in both electroplating and electroless plating of metals (153—171). The addition of citric acid to an electroless nickel plating bath results in a smooth, hard, nonporous metal finish. 

Phospha.tes, Pentasodium triphosphate [7758-29-4] sodium tripolyphosphate, STPP, Na P O Q, is the most widely used and most effective builder in heavy-duty fabric washing compositions (see also Phosphoric acid and phosphates). It is a strong sequestrant for calcium and magnesium, with a p c of ca 6, and provides exceUent suspending action for soils. Because of its high sequestration power, it also finds extensive appHcation in automatic-dishwashing detergents. Sodium tripolyphosphate forms stable hydrates and thus aids in the manufacture of crisp spray-dried laundry powders. 

Tetrasodium pyrophosphate [7722-88-5] Na4P20y, is another important primary builder and detergent. In sequestration, it is not quite as effective as sodium tripolyphosphate and its usage in heavy-duty laundry powders has declined in recent years. Functionally, tetrasodium pyrophosphate is both a builder for surfactants (ie, water softener) and alkaH. 

Cold Exhaust Dyeings Fiber-Reactive Dyes. Start at 25—30°C optionally with a sequestrant and maintain. The dye is added over 5 min, then there is portionwise addition of salt every 10—15 min, increasing the size of the addition each time over 1 h. The amount of salt used (10—100 g/L) depends on the depth of shade. After the final addition of salt, wait 15 min, portionwise add soda ash (10—20 g/L) over 15 min, and continue dyeing for 30—45 min. Drop dyebath, cold water rinse, and use a sequence of hot washes to remove all loose "unfixed" dye. 

---