Scroll window

Fig. 3.14 Scroll window of the Check the experiment parameters dialog box.

Normally the experiment parameter dialog box displays the pulse program and a list of parameters with a brief comment beside each parameter. This scroll window can be changed into a more compact form by disabling the options Show pulse program and One column edit. The option Start Win NMR allows either ID WIN-NMR or 2D WIN-NMR to be started automatically as soon as the calculation is completed with the current simulated data loaded into the main display window. 

The names STDIN and STDOUT are derived from standard input and standard output, an idea popularized by the UNIX operating system. Standard input and standard output are abstract files from which a script can accept input and send output, respectively. When a script is first launched, standard input corresponds to the keyboard and standard output corresponds to the computer screen. On Windows and UNIX systems, standard output appears in the command interpreter window. On Macs, the output appears in a small scrolling window that MacPerl creates specifically for this pmpose. When a Perl script is laimched, the user has the option of changing where standard input and output come from and go to. The user can also arrange for the standard output of one script to be sent to the standard input of another script in assembly-line fashion. This is actually a very powerful facility, but one that is beyond the scope of this chapter. 

Capture zoomed in on the schematic, but the DC source is no longer visible. Click the LEFT mouse button as shown to scroll the window to the left ... 

Next, we will attempt to change the name of the source. The property that specifies the name of the source is not displayed in the window. Click the LEFT mouse button as shown below to scroll the spreadsheet to the right ... 

The Part Reference property is the name of the resistor, Rl in this case. The PCB Footprint property is the graphic that will be used if you use this schematic to create a PC board. If we scroll the window to the right, we will see more properties. Two screen captures are shown below to display all of the properties ... 

If you remember, the footprint of the resistor was not shown on the schematic. This is because the PCB Footprint property is not being displayed. All properties can either be displayed or not. We will illustrate how to display the PCB FOOtp/Int property. Scroll the properties window to the left to display the PCB Footprint property and then click the LEFT mouse button on the PCB Footprint column to select the column ... 

The power connectors are located near the bottom of the scrolling Symbol window pane ... 

Select the option to ClVStB 3 blffllH project and then click the OK button. If you scroll the window to the bottom right of the page, you should see the new title block with the specified information. I have zoomed in on the title block to see the information more clearly. (To zoom in, place the mouse pointer over the title block and type I.)... 

To see the results, click the LEFT mouse button on the vertical scroll bar to scroll the window through the remainder of the file. You will first see the node voltages ... 

This screen shows that the model name is D1N4734A. The parameter for breakdown voltage is Bv and cannot be seen on the screen. Scroll the text window to the right to see more of the model ... 

Scroll the window to the right until you see the time and voltage attributes ... 

Scroll down the window until you see the SPICE Models link ... 

The Add 3S Global button adds a library so that all projects can use the library. The Add to Design button adds the library for the current project only. If you look in the list of libraries, all libraries that have an asterisk added to the name are global libraries and available to all projects. Libraries without an asterisk are only available to the current project. If we scroll the window to the right, we can see that the library we added does have an asterisk added to the name ... 

You can scroll through the list if you like. Hundreds of capacitors are contained in this list. To select a part, click the LEFT mouse button on the line in the database you want to select. If the line is highlighted in green, then the part is correctly linked to a graphic symbol in one of the symbol libraries. If a symbol and PCB layout footprint are found, they will be displayed in separate windows ... 

If using Word 97 or Word 2000, start the Resume Wizard by selecting "New" under the File pull-down menu. This brings up a window with multiple tabs. Select the "Other Documents" tab. Within that interface, icons for several different templates and Wizards will appear. Scroll down and then double-click on the Resume Wizard icon. 

This section describes the function of the most important buttons in the button panel (Fig. 4.2). Some of the additional options available within the Display pull-down menu in the main menu bar of 1D WIN-NMR and the function of scroll bars and function keys will be discussed in sections 4.5.2 and 4.5.3 respectively. All affect the display of a spectrum or FID in the ID WIN-NMR [Spectrum] window. The display buttons (Fig. 4.7) are available, whenever the ID WIN-NMR program has been started. 

The scroll bars in the Spectrum window let you scroll the spectrum in the x- and y-... 

Use the same series of data and follow the same procedure as before to try out the four Traficante window types. Use the Interactive option, as a starting value set LB = 0, which yields a horizontal line and corresponds to no weighting. Increase and decrease the LB value in small steps using the scroll bar and try to predict the effect on your spectrum. Use different values to enhance the resolution, store the results and compare the resulting spectra using the multiple display. 

Imperial sovereigns. Tatyana shifted the mouse to call up the relevant file. Acquisition orders, along with directives for the procurement of a lot of other antiques and artefacts from museums and private collections. Plus, somewhere here - she frowned, switching windows and scrolling the list - a directive to secrete a half-coin on the persons specified. ... 

The DFS is a graphical user interface software application that has the look and feel of most Windows-based applications. DFS uses standard Windows features, such as icons, drop-down menus, buttons, scroll bars, and dialog boxes. 

The scroll was again unrolled, but this time Harford sat obligingly on one edge while Osborne held the other. I leaned forward and saw a detailed plan, drawn to scale, of the front elevation of a house or temple. The central feature was a colonnaded porch with a square wing on either side. The windows were rectangles divided by twelve panes of glass and on the roof, chimneys formed regimented lines. There was even a dome, like a modest St. Paul s. The dome is still under discussion, said Osborne. 

Excel Tip. To display a shortcut menu that lists all sheets in the workbook, right-click on any of the tab scroll buttons (Excel for Windows) or hold down the CONTROL key and click on any of the tab scroll buttons (Excel for the Macintosh). You can then select the desired sheet. 

To use the Split feature to split a document window horizontally into two windows, select an entire row as if you were going to insert a row. Then choose Split from the Window menu. This creates a split in the window, above the selected row, with each part of the window displaying the active document. Each part of the document now has its own scroll bar, and you can scroll one part of the document while the other part remains fixed. A vertical split is accomplished in the same way. 

You can also split the document window by placing the mouse pointer on either split button (the small rectangles at the right end of the horizontal scroll bar and at the top of the vertical scroll bar), then click and drag the button. 

Excel Tip. To remove a split from a window, it s not necessary to slide the split button back to its original position at the top or left-hand side of the scroll bar. Just place the pointer on the split button and double-click. 

Freeze Panes can be used to create a similar split document window, but the upper or left part of the window is fixed and cannot be scrolled. Split panes are useful to display fixed row or column headings (or both) while scrolling through the rest of the worksheet. 

You can use the cursor keys (up, down, left, right) to move the large red cursor to any character you want to edit. If you move to a character not on the large grid (out of the window), the window automatically scrolls to make the character appear. You can also look at the bottom of the screen to move the larger cursor, since the flashing square on the character set moves with the main grid. 

These elements are not all found on every window, as programmers can choose to eliminate or modify them. Still, in most cases these will be constant, with the rest of the window filled in with menus, toolbars, a workspace or other application-specific elements. For instance, Microsoft Word, the program with which this book was written, adds an additional control box and minimize and maximize buttons for each document. It also has a menu bar, a number of optional toolbars, scroll bars at the right and bottom of the window, and a status bar at the very bottom. Application windows can become very cluttered. 

Note that numerous statistical functions appear in the window labeled Select a function . Use the mouse to scroll down the list of functions until you come to the SLOPE function, and then click on it. The function appears in bold under the left-hand window, and a description of the function appears below it. Read the description of the slope function, and then click OK. The following window appears just below the formula bar. 

Step 5 In the list on the left, choose Property/Specifications. In property method, scroll down to get RK-Soave (see Figure 2.4). To eliminate the red pair parameters, open the window and click on the designated (recommended) data set. 

Step 1 It is easy to add the convective diffusion equation by starting with the fluid flow model of the T-sensor. Choose Multiphysics/Model Navigator. A window appears with a hst of possible equations. Scroll down and select Chemical Engineering Module/Mass Balance/Convection and Diffusion/Steady-state Analysis. Click Add. Now FEMLAB will solve both equations. 

---