Part Reference property

The Part Reference property is the name of the resistor, Rl in this case. The PCB Footprint property is the graphic that will be used if you use this schematic to create a PC board. If we scroll the window to the right, we will see more properties. Two screen captures are shown below to display all of the properties ... 

Smith, D.A., Ackland, M.J. and Jones, B.C., Properties of c)4ochrome P450 isoenzymes and their substrates. Part 2 properties of cytochrome P450 substrates. Drug Discov. Today, 1997,2, 479 86 and references cited therein. 

Alkaloid Code Substituents Properties Occurrence (plant part) (references)... 

The many commercially attractive properties of acetal resins are due in large part to the inherent high crystallinity of the base polymers. Values reported for percentage crystallinity (x ray, density) range from 60 to 77%. The lower values are typical of copolymer. Poly oxymethylene most commonly crystallizes in a hexagonal unit cell (9) with the polymer chains in a 9/5 helix (10,11). An orthorhombic unit cell has also been reported (9). The oxyethylene units in copolymers of trioxane and ethylene oxide can be incorporated in the crystal lattice (12). The nominal value of the melting point of homopolymer is 175°C, that of the copolymer is 165°C. Other thermal properties, which depend substantially on the crystallization or melting of the polymer, are Hsted in Table 1. See also reference 13. 

The most effective specification is that which accomplishes the desired result with the fewest requirements. Properties and performance should be emphasized rather than how the objectives ate to be achieved. Excessive demonstration of emdition on the part of the writer or failure to recognize the usually considerable processing expertise held by the vendor results in a lengthy and overly detailed document that generally is counterproductive. Redundancy may lead to technical inconsistency. A requirement that cannot be assessed by a prescribed test method or quantitative inspection technique never should be included in the specifications. Wherever possible, tests should be easy to perform and highly correctable with service performance. Tests that indicate service life are especially useful. Standard test references, eg, ASTM methods, ate the most desirable, and those that ate needed should be selected carefully and the numbers of such references should be minimized. To eliminate unnecessary review activity by the would-be complier, the description of a standard test should not be paraphrased or condensed unless the original test is referenced. 

The vapoi piessuie values have been calculated at the indicated tempeiatuies using the lelationship derived from experimental data at Pennsylvania State University, and a critical review of Hterature references (5). This study is a part of the effort by the American Institute of Chemical Engineers (AIChE) to obtain accurate data through their Design Institute for Physical Property Data (DIPPR). 

AH the foregoing faciUties form part of the spectmm of options that, in addition to the permanent system data bank, enable the engineer to get the most out of a flow-sheeting system. The following Hst shows the physical properties that are often required for process simulation. The methods of estimating these properties, when direct measurements are not available, are indicated in the references following the properties (also see Thermodynamic properties). 

The possible therapeutic applications of these alkaloids as proto-zooicidal agents, coronary dilators and ecbolics, and in nervous diseases, for example in the treatment of post-encephalitic conditions, have been discussed by a number of authors. The alkylharmols, referred to above, form part of an extensive series prepared by Coulthard, Levene and Pyman, and tested by these authors for bactericidal properties and by... 

Nevertheless, previous developments and some of our results prove that the structural properties of several systems with short-range repulsive forces are straightforwardly and sufficiently accurately given by ROZ integral equations. Thermodynamic properties are much more difficult to describe. Reliable tools exist to obtain thermodynamics at high temperatures or for states far from phase transitions. Of particular importance, and far from being solved, are the issues related to phase transitions in partly quenched systems, even for simple models with attractive interactions. It seems that the results obtained by Kierlik et al. [27], may serve as a helpful reference in this direction. 

The first term is referred to as the diamagnetic contribution, while the latter is the paramagnetic part of the magnetizability. Each of the two components depend on the selected gauge origin however, for exact wave functions these cancel exactly. For approximate wave functions this is not guaranteed, and as a result the total property may depend on where the origin for the vector potential (eq. (10.61)) has been chosen. 

The material in this section is divided into three parts. The first subsection deals with the general characteristics of chemical substances. The second subsection is concerned with the chemistry of petroleum it contains a brief review of the nature, composition, and chemical constituents of crude oil and natural gases. The final subsection touches upon selected topics in physical chemistry, including ideal gas behavior, the phase rule and its applications, physical properties of pure substances, ideal solution behavior in binary and multicomponent systems, standard heats of reaction, and combustion of fuels. Examples are provided to illustrate fundamental ideas and principles. Nevertheless, the reader is urged to refer to the recommended bibliography [47-52] or other standard textbooks to obtain a clearer understanding of the subject material. Topics not covered here owing to limitations of space may be readily found in appropriate technical literature. 

Central to the general science of complexity is the concept of emergence. Emergence refers to the appearance of higher-level properties and behaviors of a system that -- while obviously originating from the collective dynamics of that system s components - are neither to be found in nor are directly deducible from the lower-level properties of that system. Emergent properties are properties of the whole that are not possessed by any of the individual parts making up that whole. 

---