Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Safety labelling and

Safety and efficacy data on a number of antitussives and expectorants have been reviewed by the FDA s Advisory Review Panel on Over-the-Counter (OTC) Cough, Cold, Allergy, Bronchodilator, and Antiasthmatic Products. The conclusions and recommendations regarding the effectiveness, safety, labeling, and suitability for marketing of over-the-counter preparations have been reported (103). After review of these recommendations, FDA has issued final monographs for over-the-counter antitussives (12) and for expectorants (1). LD q data for most of the compounds described have been reported (104,105). [Pg.528]

Laboratory Safety Labeling and Transfer of Chemicals Quick Facts (OSHA 3410— 2011). [Pg.532]

The U.S. Eood and Dmg Administration (EDA) adopted a legally binding standard, which took the form of a performance standard for laser products (56,57). The standard provides a classification scheme for lasers similar to the ANSI classification. AH lasers sold after August 2, 1976 must comply with its provisions. The standard requires incorporation of safety-related labeling and protective equipment according to the class of the laser. The primary impact of the EDA standard is on laser manufacturers and scientific supply firms. [Pg.12]

These thermoplastic pigments found application in a much wider range of finished products. New, large-volume applications included coated paper for labels and point of purchase signage, gravure for soap box cartons and bright textiles for fashion, and safety applications. [Pg.294]

Information (i.e. at least a safety data sheet and comprehensive container label) and training related to the hazards in the handling and use of the range of chemicals. [Pg.138]

Control the classification, provision of labels and safety data sheets, and safe packaging of chemicals by supplier. [Pg.444]

Signpost to the Health and Safety (Safety Signs and Signals) Regulations 1996 Read the label - How to find out if chemicals are dangerous... [Pg.578]

Approved requirements for the packaging, labelling and caiTiage of radioactive matenal by rails A guide to the Health and Safety (Consultation with Employees) Regulations 1996 A guide to the Work m Compressed Air Regulations 1996... [Pg.580]

Regulate the classification, provision of safety data sheets, labelling and packaging of substances and preparations dangerous for supply. There are specific exceptions, e.g. medicines, pesticides, wastes, radioactive substances or preparations. [Pg.594]

The required notification must be provided at ieast annually In writing. Acceptable forms of notice are, for example, a letter, product labeling, and product literature distributed to customers. If you are required to prepare and distribute a Material Safety Data Sheet (MSDS) for the mixture under the Occupational Safety and Health Act (OSHA) Hazard Communication Standard, your section 313 notification may be attached to the MSDS or the MSDS may be modified to include the required information. (A sample letter and recommended text for inclusion in an MSDS appear on pages E-4 and E-5 of this appendix.)... [Pg.94]

The Consumer Product Safety Commission (CPSC), an independent agency, controls the packaging, labeling, and distribution of a broad range of toys, clothes, electronics, and otlier products. [Pg.414]

Users must be informed of the hazards through container labels and Material Safety Data Sheets (MSDSs). [Pg.1076]

The consuming public must assume that the producer of a product has shown reasonable consideration for the safety, correct quantity, proper labeling, and other social aspects of the product. Since the 1960s these types of important concerns have expanded and been reinforced by a recognition of the consumer s right to know as well as by concerns for conservation, ecology, antilittering, and the like. Numerous safety-related and socially responsible laws have been enacted and more are on the way. [Pg.285]

Over-the-Counter Drug Review begun to enhance the safety, effectiveness and appropriate labelling of drugs sold without prescription. [Pg.33]

The official permission to use a synthetic colorant in food is determined by its quality and safety. Detailed and accurate analysis became compulsory in order to verify purity and quantify the labeled concentrations of colorants in food. For the analysis of synthetic colorants added to food products, (1) simple and rapid methods are used to determine their presence, (2) accurate and precise methods evaluate then-concentrations, or (3) certain methods evaluate their degradations to unstable and unsafe forms. This chapter is dedicated to these three methods used to identify and quantify synthetic colorants as pure or mixed pigments in foodstuffs. [Pg.533]

The most difficult problem of risk evaluation linked to chemicals will be discussed in this Part. This is primarily a medical problem, which therefore comes within the competence of the company medical officer and epidemiologists, but neverthel need not only be dealt with by them. The person in charge of safety control in a place where chemicals are handled also has to tackle this problem. This person will have to take into account the level of toxicity risk of a substance. This will determine the constraint level of the measures to be taken, its favoured means of penetration, which depends on the activity, and its penetration properties specific to the organism. The physical properties of the substance (which will determine the nature of the precautions to be taken) and also the values of toxicity parameters have to be taken into account. He has to check the container labelling and know how to interpret and explain the toxicity instructions on this labelling. [Pg.125]

Health and Safety Data Sheet This document is required to provide anyone who comes into contact with the material with sufficient information needed to react to a spillage or breakage. The labelling and health and safety sheet regulations are not yet consistent through out the world and at the time of writing there is no way to label a product so that it conforms to US, Canadian, European and Australian requirements The Safety data sheet issue is less confused, the U S OSHA and EU forms of the so called material safety data sheet are moving to conform with an I SO Standard. [Pg.275]


See other pages where Safety labelling and is mentioned: [Pg.276]    [Pg.343]    [Pg.199]    [Pg.216]    [Pg.276]    [Pg.343]    [Pg.199]    [Pg.216]    [Pg.942]    [Pg.434]    [Pg.383]    [Pg.35]    [Pg.239]    [Pg.553]    [Pg.373]    [Pg.73]    [Pg.23]    [Pg.286]    [Pg.111]    [Pg.576]    [Pg.97]    [Pg.28]    [Pg.166]    [Pg.100]    [Pg.140]    [Pg.576]    [Pg.575]    [Pg.138]    [Pg.154]   
See also in sourсe #XX -- [ Pg.234 ]




SEARCH



LEARNING THE LANGUAGE OF SAFETY SIGNS, SYMBOLS, AND LABELS

OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION (OSHA)—LABELING IN THE WORKPLACE

Voluntary safety - and enviornmental labels

© 2024 chempedia.info