Rubber blends with thermoplastic elastomers

Reports on blending of rubbers with TPEs are scarce. This is likely due to the very conservative attitude of the rubber industry and the high price of the TPE grades. 

Based on the miscibility of PVC with PEE, the blending of PEE with polar rubbers, such as NBR, chlorinated polyethylene (CPE), and chlorosulfonated polyethylene (CSM) attracted research interest. Recall that PVC/NBR blends are fully miscible, similar to PVC/PEE ones. Therefore, it was intuitive to check the compatibility between PEE and NBR in uncured state [17,108]. The interest behind CPE/PEE and CSM/PEE blends was due to the supposed dipole interactions between the components yielding good compatibility [17,109]. 

---

Development of TPEs with various types of elastomers and polyolefins has been extensively reported by many researchers. Ethylene-propylene-diene monomer (EPDM) or its modified form is used as the elastomer in most polyolefin TPEs. Natural rubber (NR) and thermoplastic blends have become an area of interest only recently. These materials are known as thermoplastic natural rubber (TPNR). The development of TPNR was principally based on the criteria set by EPDM blends with thermoplastics. Two types are known, one belonging to the TPO class and the other belonging to the TPV class. 

Butadiene copolymers are mainly prepared to yield mbbers (see Styrene-butadiene rubber). Many commercially significant latex paints are based on styrene—butadiene copolymers (see Coatings Paint). In latex paint the weight ratio S B is usually 60 40 with high conversion. Most of the block copolymers prepared by anionic catalysts, eg, butyUithium, are also elastomers. However, some of these block copolymers are thermoplastic mbbers, which behave like cross-linked mbbers at room temperature but show regular thermoplastic flow at elevated temperatures (45,46). Diblock (styrene—butadiene (SB)) and triblock (styrene—butadiene—styrene (SBS)) copolymers are commercially available. Typically, they are blended with PS to achieve a desirable property, eg, improved clarity/flexibiHty (see Polymerblends) (46). These block copolymers represent a class of new and interesting polymeric materials (47,48). Of particular interest are their morphologies (49—52), solution properties (53,54), and mechanical behavior (55,56). 

In addition to the somewhat sophisticated triblock thermoplastic elastomers described above, mention should be made of another group of thermoplastic diene rubbers. These are physical blends of polypropylene with a diene rubber such as natural rubber. These may be considered as being an extension to the concept of thermoplastic polyolefin rubbers discussed in Section 11.9.1 and although extensive experimental work has been carried out with these materials they do not yet appear to have established themselves commercially. 

Compatibilization along with dynamic vulcanization techniques have been used in thermoplastic elastomer blends of poly(butylene terephthalate) and ethylene propylene diene rubber by Moffett and Dekkers [28]. In situ formation of graft copolymer can be obtained by the use of suitably functionalized rubbers. By the usage of conventional vulcanizing agents for EPDM, the dynamic vulcanization of the blend can be achieved. The optimum effect of compatibilization along with dynamic vulcanization can be obtained only when the compatibilization is done before the rubber phase is dispersed. 

Thermoplastic elastomers are materials that have the properties of vulcanized rubbers but can be processed by techniques associated with thermoplastics. The commercial importance of TPEs is due to their superior processing properties and economic advantages over conventional rubbers and plastics. TPEs from rubber-plastic blends became important because they combine the superior processability of thermoplastics and the... 

Blend of (1) and (2) type categories mostly include the modification of engineering thermoplastics with another thermoplastic or rubber. PS-EPDM blends using a low-molecular weight compound (catalyst) Lewis acid have been developed [126]. Plastic-plastic blends, alloys of industrial importance, thermoplastic elastomers made by dynamic vulcanization, and rubber-rubber blends are produced by this method. 

Handbook of elastomers , A.K. Bhowmick and H.L. Stephens Marcel Dekker (1988) Series Plastics Engineering, Volume 19 ISBN 0824778006. This handbook systematically addresses the manufacturing techniques, properties, processing, and applications of rubbers and rubber-like materials. The Handbook of Elastomers provides authoritative information on natural rubbers, synthetic rubbers, liquid rubbers, powdered rubbers, rubber blends, thermoplastic elastomers, and rubber-based composites— offering solutions to many practical problems encountered with rubber materials. 

Chattopadhyay S., Chaki T.K., and Bhowmick A.K., New thermoplastic elastomers from poly(ethyle-neoctene) (engage), poly(ethylene-vinyl acetate) and low-density polyethylene by electron beam technology structural characterization and mechanical properties. Rubber Chem. TechnoL, 74, 815, 2001. Roy Choudhury N. and Dutta N.K., Thermoplastic elastomeric natural rubber-polypropylene blends with reference to interaction between the components. Advances in Polymer Blends and Alloys Technology, Vol. 5 (K. Finlayson, ed.), Technomic Publishers, Pensylvania, 1994, 161. 

Elastomers are often blended with plastics either to improve the impact resistance or to develop new materials having both plastic and elastic behavior. When the elastomer in the blend is dynamically vulcanized, the product is called a thermoplastics vulcanizate (TPV). Blends with unvulcanized mbber phase are usually known as thermoplastic elastomers. TPVs are discussed in another section of this book. This section will deal with recent developments in rubber-plastic blends. 

Thermoplastic elastomers (TPE), 9 565-566, 24 695-720 applications for, 24 709-717 based on block copolymers, 24 697t based on graft copolymers, ionomers, and structures with core-shell morphologies, 24 699 based on hard polymer/elastomer combinations, 24 699t based on silicone rubber blends, 24 700 commercial production of, 24 705-708 economic aspects of, 24 708-709 elastomer phase in, 24 703 glass-transition and crystal melting temperatures of, 24 702t hard phase in, 24 703-704 health and safety factors related to, 24 717-718... 

Recently, a new concept in the preparation of TPVs has been introduced, based on the reaction-induced phase separation (RIPS) of miscible blends of a semicrystalline thermoplastic in combination with an elastomer, with the potential for obtaining submicrometer rubber dispersions. This RIPS can be applied to a variety of miscible blends, in which the elastomer precursor phase was selectively crosslinked to induce phase separation. Plausible schematic representation of the morphological evolution of dynamic vulcanization of immiscible and miscible blends is shown in Fig. 9. For immiscible blends, dynamic vulcanization leads to a decrease in the size... 

Other thermoplastic elastomer combinations, in which the elastomer phase may or may not be cross-linked, include blends of polypropylene with nitrile (30,31), butyl (33), and natural (34) rubbers, blends of PVC with nitrile mbber (35,36), and blends of halogenated polyolefins with ethylene interpolymers (29). Collectively, thermoplastic elastomers of this type are referred to herein as hard polymer/elastomer combinations. Some of the more important examples of the various types are shown in Table 3. 

Blend of other thermoplastic elastomers with silicone rubbers. 

A comparatively new group of materials— thermoplastic elastomers or thermoplastic rubbers —combines the ease of processing of thermoplastics with qualities of traditional vulcanized rubbers, especially elasticity. Because of convenience in processing there is much interest too in blends of plastics with elastomers, which may be modified by the inclusion of filler or glass fibre. As an example, a rubber-like material that can be processed as a thermoplastic can be made by blending and melt-mixing an ethylene-propylene rubber with polypropylene. The use of such blends may be helpful when there are needs to reclaim and re-process material, and in order to obtain products with qualities intermediate between those of the main components of the blends. 

Thermoplastic Olefin. These thermoplastic elastomers are primarily blends, or block or graft copolymers, of ethylene/propylene rubber with polypropylene. 

In conjunction with an antioxidant and colorant, Kanae [1] used the Step 3 products as thermoplastic elastomers in automobile moldings. Thermoplastic elastomers having good tensile and impact strength were also prepared by Datta [2] by blending isotactic polypropylene with ethylene-propylene rubber. 

---