Elastomer blends, thermoplastic rubber

Handbook of elastomers , A.K. Bhowmick and H.L. Stephens Marcel Dekker (1988) Series Plastics Engineering, Volume 19 ISBN 0824778006. This handbook systematically addresses the manufacturing techniques, properties, processing, and applications of rubbers and rubber-like materials. The Handbook of Elastomers provides authoritative information on natural rubbers, synthetic rubbers, liquid rubbers, powdered rubbers, rubber blends, thermoplastic elastomers, and rubber-based composites— offering solutions to many practical problems encountered with rubber materials. 

Roy Choudhury N., De P.P., and Bhowmick A.K., Thermoplastic elastomeric natural rubber-polyolefin blends. Thermoplastic Elastomers from Rubber Plastic Blend (De S.K. and Bhowmick A.K., eds.), Ellis Horwood, London, 1990, 11. 

Chin Han Chan, PhD, is an associate professor at the Faculty of Applied Sciences, Universiti Teknologi MARA [MARA University of Technology) in Selangor, Malaysia. She has received many research grants, has published many articles in professional journals, has published chapters in books, and has presented at many professional conferences. Her field of interest includes epoxidized natural rubber-based nanostructured blends, thermoplastic elastomer, biodegradable polyester/polyether blends, and solid polymer electrolytes. 

Natural Rubber Engineering Thermoplastic Elastomer Blends... 

In addition to the somewhat sophisticated triblock thermoplastic elastomers described above, mention should be made of another group of thermoplastic diene rubbers. These are physical blends of polypropylene with a diene rubber such as natural rubber. These may be considered as being an extension to the concept of thermoplastic polyolefin rubbers discussed in Section 11.9.1 and although extensive experimental work has been carried out with these materials they do not yet appear to have established themselves commercially. 

Such rubbery and thermoplastic polymers may be blended in any proportion, so that on one hand the product may be considered as a thermoplastic elastomer, and on the other as an elastomer-modified thermoplastic. There is, furthermore, a spectrum of intermediate materials, including those which might be considered as leather-like. In this area the distinction between rubber and plastics material becomes very blurred. 

A manufacturer considering using a thermoplastic elastomer would probably first consider one of the thermoplastic polyolefin rubbers or TPOs, since these tend to have the lowest raw polymer price. These are mainly based on blends of polypropylene and an ethylene-propylene rubber (either EPM or EPDM) although some of the polypropylene may be replaeed by polyethylene. A wide range of blends are possible which may also contain some filler, oil and flame retardant in addition to the polymers. The blends are usually subject to dynamic vulcanisation as described in Section 11.9.1. 

Compatibilization along with dynamic vulcanization techniques have been used in thermoplastic elastomer blends of poly(butylene terephthalate) and ethylene propylene diene rubber by Moffett and Dekkers [28]. In situ formation of graft copolymer can be obtained by the use of suitably functionalized rubbers. By the usage of conventional vulcanizing agents for EPDM, the dynamic vulcanization of the blend can be achieved. The optimum effect of compatibilization along with dynamic vulcanization can be obtained only when the compatibilization is done before the rubber phase is dispersed. 

Thermoplastic elastomers are materials that have the properties of vulcanized rubbers but can be processed by techniques associated with thermoplastics. The commercial importance of TPEs is due to their superior processing properties and economic advantages over conventional rubbers and plastics. TPEs from rubber-plastic blends became important because they combine the superior processability of thermoplastics and the... 

N. R. Choudhuary, P. P. De, and A. K. Bhowmick, Thermoplastic Elastomers from Rubber-Plastic Blends, Ellis Horwood, England, Chap. 3, p. 79 (1990). 

Plastics, such as PE, PP, polystyrene (PS), polyester, and nylon, etc., and elastomers such as natural rubber, EPDM, butyl rubber, NR, and styrene butadiene rubber (SBR), etc., are usually used as blend components in making thermoplastic elastomers. Such blends have certain advantages over the other type of TPEs. The desired properties are achieved by suitable elasto-mers/plastic selection and their proportion in the blend. 

Blend of (1) and (2) type categories mostly include the modification of engineering thermoplastics with another thermoplastic or rubber. PS-EPDM blends using a low-molecular weight compound (catalyst) Lewis acid have been developed [126]. Plastic-plastic blends, alloys of industrial importance, thermoplastic elastomers made by dynamic vulcanization, and rubber-rubber blends are produced by this method. 

Typical Properties of Thermoplastic Elastomers Developed from Nylon-6-Acrylate Rubber Blends... 

Chattopadhyay S., Chaki T.K., and Bhowmick A.K., New thermoplastic elastomers from poly(ethyle-neoctene) (engage), poly(ethylene-vinyl acetate) and low-density polyethylene by electron beam technology structural characterization and mechanical properties. Rubber Chem. TechnoL, 74, 815, 2001. Roy Choudhury N. and Dutta N.K., Thermoplastic elastomeric natural rubber-polypropylene blends with reference to interaction between the components. Advances in Polymer Blends and Alloys Technology, Vol. 5 (K. Finlayson, ed.), Technomic Publishers, Pensylvania, 1994, 161. 

Jha A., Dutta B., and Bhowmick A.K., Effect of fillers and plasticizers on the performance of novel heat and oil-resistant thermoplastic elastomers from nylon-6 and acrylate rubber blends, J. Appl. Polym. Sci., 74, 1490, 1999. 

Papke N. and Kargar-Kocsis J., Thermoplastic elastomer based on compatibilised poly(ethyleneterphtha-late) blend Effect of rubber type and dynamic curing. Polymer, 42, 1109, 2001. 

Roy Choudhury N. and Bhowmick A.K., Strength of thermoplastic elastomers from rubber-polyolefin blend, J. Mat. Sci., 25, 161, 1990. 

Kresge E.N., Polyolefin thermoplastic elastomer blends. Rubber Chem. TechnoL, 64, 469, 1991. 

Elastomers are often blended with plastics either to improve the impact resistance or to develop new materials having both plastic and elastic behavior. When the elastomer in the blend is dynamically vulcanized, the product is called a thermoplastics vulcanizate (TPV). Blends with unvulcanized mbber phase are usually known as thermoplastic elastomers. TPVs are discussed in another section of this book. This section will deal with recent developments in rubber-plastic blends. 

Akhtar, S. Morphology and Physical Properties of Thin Films of Thermoplastic Elastomers from Blends of Natural Ruhher and Polyethylene, Rubber Chem. Technol. 61, 599-583, 1988. 

Al-Malaika, S. and Amir, E.J., Thermoplastic elastomers Part III—Ageing and mechanical properties of natural rubber-reclaimed rubber/polypropylene systems and their role as solid phase dispersants in polypropylene/polyethylene blends, Polym. Degrad. Stab., 26, 31, 1989. 

Ismail, H. and Suryadiansyah, S., Thermoplastic elastomers based on polypropylene/natural rubber and polypropylene/recycle rubber blends. Polymer Test., 21, 389, 2002. 

Presents current research activities on new rubbers, thermoplastic elastomers, nanocomposites, biomaterials, and smart polymers, as well as rubber blends, composites, and rubber ingredients... 

Thermoplastic elastomers (TPE), 9 565-566, 24 695-720 applications for, 24 709-717 based on block copolymers, 24 697t based on graft copolymers, ionomers, and structures with core-shell morphologies, 24 699 based on hard polymer/elastomer combinations, 24 699t based on silicone rubber blends, 24 700 commercial production of, 24 705-708 economic aspects of, 24 708-709 elastomer phase in, 24 703 glass-transition and crystal melting temperatures of, 24 702t hard phase in, 24 703-704 health and safety factors related to, 24 717-718... 

Note 2 The interfacial interaction between hard and soft phase domains in a thermoplastic elastomer is often the result of covalent bonds between the phases and is sufficient to prevent the flow of the elastomeric phase domains under conditions of use. Note 3 Examples of thermoplastic elastomers include block copolymers and blends of plastics and rubbers. 

---