Redox oxygen

The first part of the book deals with fundamental characteristics of ceria from the point of view of catalytic applications. After an introductory chapter on production, mining and safety issues, a series of chapters (chp. 2-7) cover structural properties, preparation chemistry and fundamentals of eharacterization and redox/oxygen storage properties. A specific section (chp. 6) has been dedicated to ceria-zirconia due to the importance this material has in current three-way catalysis for auto-exhaust treatment. To complete the first part there is a chapter on computational studies (chp. 8) and one on the properties of ceria surfaces and films as model for catalytic studies (chp. 9). 

It appears that Cu primarily provides electronic conductivity to the anode and is otherwise catalytically inert. This is confirmed by data showing that Au-ceria-SDC (samaria-doped ceria) composites exhibit a similar performance to that of Cu-ceria-SDC anodes, as Au would not be expected to add catalytic activity [86,87]. It is proposed that the function of ceria is primarily that of an oxidation catalyst, although mixed electronic-ionic conductivity (MEIC) could also enhance anode performance. In general, finely dispersed ceria seems more active than doped ceria ceramics, thus the redox oxygen exchange ability of ceria at fuel conditions might be considered as a key factor. 

Reeve HL, Michelakis E, Nelson DP, Weir EK, Archer SL. Alterations in a redox oxygen sensing mechanism in chronic hypoxia. J Appl Physiol 2001 90 2249-2256. 

Geochemists familiar with high temperature systems also refer to oxygen fugacity as a measure of redox. Oxygen fugacity is related to Eh by ... 

Thus, it can basically be predicted under what conditions (pH, concentration of redox species) tire metal dissolution reaction (Fe Fe ) proceeds tliennodynamically. From a practical point of view, tire rate of tire reaction and tlierefore tire fate of tire oxidized species (Fe ) is extremely important tliey can eitlier be solvated, i.e., to fonn Fe (H20) complexes, and tlierefore be efficiently dissolved in tire solution, or tliey can react witli oxygen species of... 

Highly protective layers can also fonn in gaseous environments at ambient temperatures by a redox reaction similar to that in an aqueous electrolyte, i.e. by oxygen reduction combined with metal oxidation. The thickness of spontaneously fonned oxide films is typically in the range of 1-3 nm, i.e., of similar thickness to electrochemical passive films. Substantially thicker anodic films can be fonned on so-called valve metals (Ti, Ta, Zr,. ..), which allow the application of anodizing potentials (high electric fields) without dielectric breakdown. 

A substantial fraction of the named enzymes are oxido-reductases, responsible for shuttling electrons along metabolic pathways that reduce carbon dioxide to sugar (in the case of plants), or reduce oxygen to water (in the case of mammals). The oxido-reductases that drive these processes involve a small set of redox active cofactors , that is, small chemical groups that gain or lose electrons. These cofactors include iron porjDhyrins, iron-sulfur clusters and copper complexes as well as organic species that are ET active. 

Ozone is very much more reactive than oxygen and is a powerful oxidising agent especially in acid solution (the redox potential varies with conditions but can be as high as + 2.0 V). Some examples are 1. the conversion of black lead(ll) sulphide to white lead(II) sulphate (an example of oxidation by addition of oxygen) ... 

In contrast to oxidation in water, it has been found that 1-alkenes are directly oxidized with molecular oxygen in anhydrous, aprotic solvents, when a catalyst system of PdCl2(MeCN)2 and CuCl is used together with HMPA. In the absence of HMPA, no reaction takes place(100]. In the oxidation of 1-decene, the Oj uptake correlates with the amount of 2-decanone formed, and up to 0.5 mol of O2 is consumed for the production of 1 mol of the ketone. This result shows that both O atoms of molecular oxygen are incorporated into the product, and a bimetallic Pd(II) hydroperoxide coupled with a Cu salt is involved in oxidation of this type, and that the well known redox catalysis of PdXi and CuX is not always operalive[10 ]. The oxidation under anhydrous conditions is unique in terms of the regioselective formation of aldehyde 59 from X-allyl-A -methylbenzamide (58), whereas the use of aqueous DME results in the predominant formation of the methyl ketone 60. Similar results are obtained with allylic acetates and allylic carbonates[102]. The complete reversal of the regioselectivity in PdCli-catalyzed oxidation of alkenes is remarkable. 

Another important example of redox titrimetry that finds applications in both public health and environmental analyses is the determination of dissolved oxygen. In natural waters the level of dissolved O2 is important for two reasons it is the most readily available oxidant for the biological oxidation of inorganic and organic pollutants and it is necessary for the support of aquatic life. In wastewater treatment plants, the control of dissolved O2 is essential for the aerobic oxidation of waste materials. If the level of dissolved O2 falls below a critical value, aerobic bacteria are replaced by anaerobic bacteria, and the oxidation of organic waste produces undesirable gases such as CH4 and H2S. 

The active site on the surface of selective propylene ammoxidation catalyst contains three critical functionalities associated with the specific metal components of the catalyst (37—39) an a-H abstraction component such as Sb ", or Te" " an olefin chemisorption and oxygen or nitrogen insertion component such as Mo " or and a redox couple such as Fe " /Fe " or Ce " /Ce" " to enhance transfer of lattice oxygen between the bulk and surface... 

The process can be operated in two modes co-fed and redox. The co-fed mode employs addition of O2 to the methane/natural gas feed and subsequent conversion over a metal oxide catalyst. The redox mode requires the oxidant to be from the lattice oxygen of a reducible metal oxide in the reactor bed. After methane oxidation has consumed nearly all the lattice oxygen, the reduced metal oxide is reoxidized using an air stream. Both methods have processing advantages and disadvantages. In all cases, however, the process is mn to maximize production of the more desired ethylene product. 

In an oversimplified way, it may be stated that acids of the volcanoes have reacted with the bases of the rocks the compositions of the ocean (which is at the fkst end pokit (pH = 8) of the titration of a strong acid with a carbonate) and the atmosphere (which with its 2 = 10 atm atm is nearly ki equdibrium with the ocean) reflect the proton balance of reaction 1. Oxidation and reduction are accompanied by proton release and proton consumption, respectively. In order to maintain charge balance, the production of electrons, e, must eventually be balanced by the production of. The redox potential of the steady-state system is given by the partial pressure of oxygen (0.2 atm). Furthermore, the dissolution of rocks and the precipitation of minerals are accompanied by consumption and release, respectively. 

Dehydrogenation, Ammoxidation, and Other Heterogeneous Catalysts. Cerium has minor uses in other commercial catalysts (41) where the element s role is probably related to Ce(III)/Ce(IV) chemistry. Styrene is made from ethylbenzene by an alkah-promoted iron oxide-based catalyst. The addition of a few percent of cerium oxide improves this catalyst s activity for styrene formation presumably because of a beneficial interaction between the Fe(II)/Fe(III) and Ce(III)/Ce(IV) redox couples. The ammoxidation of propjiene to produce acrylonitrile is carried out over catalyticaHy active complex molybdates. Cerium, a component of several patented compositions (42), functions as an oxygen and electron transfer through its redox couple. 

Reactions. The SCR process is termed selective because the ammonia reacts selectively with NO at temperatures >232° C in the presence of excess oxygen (44). The optimum temperature range for the SCR catalyst is determined by balancing the needs of the redox reactions. 

---