Raman spectroscopy microscopy

Raman microscopy is more developed than its IR counterpart. There are several reasons for this. First, the diffraction limit for focusing a visible beam is about 10 times smaller than an IR beam. Second, Raman spectroscopy can be done in a backscattering geometry, whereas IR is best done in transmission. A microscope is most easily adapted to a backscattermg geometry, but it is possible to do it in transmission. 

Ren B, Li W H, Mao B W, Gao J S and Tian Z Q 1996 Optical fiber Raman spectroscopy combined with scattering tunneling microscopy for simultaneous measurements ICORS 96 XVth Int. Conf on Raman Spectroscopy ed S A Asher and P B Stein (New York Wley) pp 1220-1... 

Materials characterization techniques, ie, atomic and molecular identification and analysis, ate discussed ia articles the tides of which, for the most part, are descriptive of the analytical method. For example, both iaftared (it) and near iaftared analysis (nira) are described ia Infrared and raman SPECTROSCOPY. Nucleai magaetic resoaance (nmr) and electron spia resonance (esr) are discussed ia Magnetic spin resonance. Ultraviolet (uv) and visible (vis), absorption and emission, as well as Raman spectroscopy, circular dichroism (cd), etc are discussed ia Spectroscopy (see also Chemiluminescence Electho-analytical techniques It unoassay Mass specthot thy Microscopy Microwave technology Plasma technology and X-ray technology). 

The mechanisms of lead corrosion in sulfuric acid have been studied and good reviews of the Hterature are available (27—30). The main techniques used in lead corrosion studies have been electrochemical measurements, x-ray diffraction, and electron microscopy. More recendy, laser Raman spectroscopy and photoelectrochemistry have been used to gain new insight into the corrosion process (30,31). 

The diffusion, location and interactions of guests in zeolite frameworks has been studied by in-situ Raman spectroscopy and Raman microscopy. For example, the location and orientation of crown ethers used as templates in the synthesis of faujasite polymorphs has been studied in the framework they helped to form [4.297]. Polarized Raman spectra of p-nitroaniline molecules adsorbed in the channels of AIPO4-5 molecular sieves revealed their physical state and orientation - molecules within the channels formed either a phase of head-to-tail chains similar to that in the solid crystalline substance, with a characteristic 0J3 band at 1282 cm , or a second phase, which is characterized by a similarly strong band around 1295 cm . This second phase consisted of weakly interacting molecules in a pseudo-quinonoid state similar to that of molten p-nitroaniline [4.298]. 

The methods used to characterise polymers are partly familiar ones like X-ray diffraction, Raman spectroscopy and electron microscopy, partly less familiar but widespread ones like neutron scattering and nuclear magnetic resonance, and partly... 

Film-forming chemical reactions and the chemical composition of the film formed on lithium in nonaqueous aprotic liquid electrolytes are reviewed by Dominey [7], SEI formation on carbon and graphite anodes in liquid electrolytes has been reviewed by Dahn et al. [8], In addition to the evolution of new systems, new techniques have recently been adapted to the study of the electrode surface and the chemical and physical properties of the SEI. The most important of these are X-ray photoelectron spectroscopy (XPS), SEM, X-ray diffraction (XRD), Raman spectroscopy, scanning tunneling microscopy (STM), energy-dispersive X-ray spectroscopy (EDS), FTIR, NMR, EPR, calorimetry, DSC, TGA, use of quartz-crystal microbalance (QCMB) and atomic force microscopy (AFM). 

QCMB RAM SBR SEI SEM SERS SFL SHE SLI SNIFTIRS quartz crystal microbalance rechargeable alkaline manganese dioxide-zinc styrene-butadiene rubber solid electrolyte interphase scanning electron microscopy surface enhanced Raman spectroscopy sulfolane-based electrolyte standard hydrogen electrode starter-light-ignition subtractively normalized interfacial Fourier transform infrared... 

The physical methods mostly require ultra high vacuum conditions having the disadvantage of not being applicable directly to solvent swollen films, but recent developments of in situ measurements in SIMS X-ray diffraction surface enhanced Raman spectroscopy (SERS) and scanning electrochemical tunneling microscopy... 

The combination of atomic force microscopy (AFM) and Raman spectroscopy is another approach to attain high spatial resolution. AFM also employs a sharp tip close to a sample surface. When the tip is made of metal and light is irradiated onto the tip and surface, Raman scattering is largely enhanced. In this way, a spatial resolution of 15 nm is achieved [2]. 

Yoshidome, M. (2006) Study of molecular aggregates on solid surface using scanning tunneling microscopy and Raman spectroscopy, Ph.D. thesis, Tohoku University. 

Steidtner, J. and Pettinger, B. (2008) Tip-enhanced Raman spectroscopy and microscopy on single dye molecules with 15 nm resolution. Phys. Rev. Lett., 100, 236101-1-236101-4. 

In 1994, we proposed that a metallic needle having a nano-tip at its apex be employed as a nano-light-source for microscopy attaining nanometric spatial resolution [2]. Later, we expanded the technique to Raman spectroscopy for molecular nano-identification, nano-analysis and nano-imaging. In this chapter, we give a brief introduction to local plasmons and microscopy using a metallic nano-needle to produce the local plasmons. Then, we describe the microscope that we built and... 

A nano-light-source generated on the metallic nano-tip induces a variety of optical phenomena in a nano-volume. Hence, nano-analysis, nano-identification and nanoimaging are achieved by combining the near-field technique with many kinds of spectroscopy. The use of a metallic nano-tip applied to nanoscale spectroscopy, for example, Raman spectroscopy [9], two-photon fluorescence spectroscopy [13] and infrared absorption spectroscopy [14], was reported in 1999. We have incorporated Raman spectroscopy with tip-enhanced near-field microscopy for the direct observation of molecules. In this section, we will give a brief introduction to Raman spectroscopy and demonstrate our experimental nano-Raman spectroscopy and imaging results. Furthermore, we will describe the improvement of spatial resolution... 

Similarly, the first-order expansion of the p° and a of Eq. (5.1) is, respectively, responsible for IR absorption and Raman scattering. According to the parity, one can easily understand that selection mles for hyper-Raman scattering are rather similar to those for IR [17,18]. Moreover, some of the silent modes, which are IR- and Raman-inactive vibrational modes, can be allowed in hyper-Raman scattering because of the nonlinearity. Incidentally, hyper-Raman-active modes and Raman-active modes are mutually exclusive in centrosymmetric molecules. Similar to Raman spectroscopy, hyper-Raman spectroscopy is feasible by visible excitation. Therefore, hyper-Raman spectroscopy can, in principle, be used as an alternative for IR spectroscopy, especially in IR-opaque media such as an aqueous solution [103]. Moreover, its spatial resolution, caused by the diffraction limit, is expected to be much better than IR microscopy. 

The thickness of the ordered crystalline regions, termed crystallite or lamellar thickness (Lc), is an important parameter for correlations with thermodynamic and physical properties. Lc and the distribution of lamellar thicknesses can be determined by different experimental methods, including thin-section TEM mentioned earlier, atomic force microscopy, small-angle X-ray scattering and analysis of the LAM in Raman spectroscopy. 

In one other example, Raman spectroscopy was employed along with FTIR spectroscopy, XPS, elemental analysis, TGA, SEM and transmission electron microscopy (TEM) to follow the compositional and structure variations of polymethylsilsesquioxane samples pyrolysed at different temperatures in an atmosphere of nitrogen [56]. At 900°C the main product was silica, with formation too of some silica oxycarbide and amorphous carbon, with Raman spectroscopy showing complementary evidence for presence of both the minor species. 

Vanduyne R.P., Hulteen J.C., Treichel D.A., Atomic-force microscopy and surface-enhanced Raman-spectroscopy. 1. Ag island films and Ag film over polymer nanosphere surfaces supported on glass, J. Chem. Phys. 1993 99 2101-211. 

In the last century, many microstructural characterization techniques have been developed, such as electron microscopy, atomic tunneling microscopy, photoelectron spectroscopy, Raman spectroscopy, etc. The structure of the OLED-based displays is such that many pixels are arranged orderly in the x-y plane. The size and number of pixels determine the resolution and size of the display. Along the z-axis, several layers are stacked on each other. These layers... 

---