Reaction quaternary ammonium

Those where the product has acquired a positive charge, namely becomes a pyridine-type quaternary ammonium (reaction 4). 

Girard s reagent T is carbohydrazidomethyltrimethylammonium chloride (I) and is prepared by the reaction of the quaternary ammonium salt formed from ethyl chloroacetate and trimethylamine with hydrazine hydrate in alco-hoUc solution ... 

Amines are powerful nucleophiles which react under neutral or slightly basic conditions with several electron-accepting carbon reagents. The reaction of alkyl halides with amines is useful for the preparation of tertiary amines or quaternary ammonium salts. The conversion of primary amines into secondary amines is usually not feasible since the secondary amine tends towards further alkylation. 

This property of quaternary ammonium salts is used to advantage m an experi mental technique known as phase transfer catalysis Imagine that you wish to carry out the reaction... 

Sodium cyanide does not dissolve m butyl bromide The two reactants contact each other only at the surface of the solid sodium cyanide and the rate of reaction under these con ditions IS too slow to be of synthetic value Dissolving the sodium cyanide m water is of little help because butyl bromide is not soluble m water and reaction can occur only at the interface between the two phases Adding a small amount of benzyltrimethyl ammonium chlonde however causes pentanemtnle to form rapidly even at room temper ature The quaternary ammonium salt is acting as a catalyst it increases the reaction rate How7... 

Quaternary ammonium salts catalyze the reaction between an anion and an organic substrate by transfemng the anion from the aqueous phase where it cannot contact the substrate to the organic phase In the example just cited the first step occurs m the... 

Quaternary ammonium salts as we have seen are useful m synthetic organic chem istry as phase transfer catalysts In another more direct application quaternary ammo mum hydroxides are used as substrates m an elimination reaction to form alkenes... 

The reactions are catalyzed by tertiary amines, quaternary ammonium salts, metal salts, and basic ion-exchange resins. The products are difficult to purify and generally contain low concentrations of acryhc acid and some diester which should be kept to a minimum since its presence leads to product instabihty and to polymer cross-linking. 

Halex rates can also be increased by phase-transfer catalysts (PTC) with widely varying stmctures quaternary ammonium salts (51—53) 18-crown-6-ether (54) pytidinium salts (55) quaternary phosphonium salts (56) and poly(ethylene glycol)s (57). Catalytic quantities of cesium duoride also enhance Halex reactions (58). 

Strong Base Anion Exchangers. As ia the synthesis of weak base anion exchangers, strong base resias are manufactured from styrenic as well as acryhc copolymers. Those based on copolymers of styrene and divinylben2ene are chloromethylated and then aminated. These reactions are the same as for the styrenic weakbase resias. The esseatial differeace is the amine used for amination. Trimethyl amine [75-50-3] N(CH2)3, and /V, /V- dim ethyl eth a n ol amine [108-01 -0] (CH2)2NCH2CH20H, are most commonly used. Both form quaternary ammonium functional groups similar to (8). 

Basic Extractants. Only long-chain quaternary ammonium salts, R3NCH3 X , ia which R represents Cg—0 2 groups and X nitrate or thiocyanate, are effectively used for REE separations (see Quaternary ammonium compounds). The extractant reacts with REE according to an anion-exchange reaction ... 

The nitro alcohols available in commercial quantities are manufactured by the condensation of nitroparaffins with formaldehyde [50-00-0]. These condensations are equiUbrium reactions, and potential exists for the formation of polymeric materials. Therefore, reaction conditions, eg, reaction time, temperature, mole ratio of the reactants, catalyst level, and catalyst removal, must be carefully controlled in order to obtain the desired nitro alcohol in good yield (6). Paraformaldehyde can be used in place of aqueous formaldehyde. A wide variety of basic catalysts, including amines, quaternary ammonium hydroxides, and inorganic hydroxides and carbonates, can be used. After completion of the reaction, the reaction mixture must be made acidic, either by addition of mineral acid or by removal of base by an ion-exchange resin in order to prevent reversal of the reaction during the isolation of the nitro alcohol (see Ion exchange). 

The action of redox metal promoters with MEKP appears to be highly specific. Cobalt salts appear to be a unique component of commercial redox systems, although vanadium appears to provide similar activity with MEKP. Cobalt activity can be supplemented by potassium and 2inc naphthenates in systems requiring low cured resin color lithium and lead naphthenates also act in a similar role. Quaternary ammonium salts (14) and tertiary amines accelerate the reaction rate of redox catalyst systems. The tertiary amines form beneficial complexes with the cobalt promoters, faciUtating the transition to the lower oxidation state. Copper naphthenate exerts a unique influence over cure rate in redox systems and is used widely to delay cure and reduce exotherm development during the cross-linking reaction. 

Analytical methods iaclude thin-layer chromatography (69), gas chromatography (70), and specific methods for determining amine oxides ia detergeats (71) and foods (72). Nuclear magnetic resonance (73—75) and mass spectrometry (76) have also been used. A frequentiy used procedure for iadustrial amine oxides (77) iavolves titratioa with hydrochloric acid before and after conversion of the amine to the quaternary ammonium salt by reaction with methyl iodide. A simple, rapid quaHty control procedure has been developed for the deterrniaation of amine oxide and unreacted tertiary amine (78). 

The Leuckart reaction uses formic acid as reducing agent. Reductive alkylation using formaldehyde, hydrogen, and catalyst, usually nickel, is used commercially to prepare methylated amines. These tertiary amines are used to prepare quaternary ammonium salts. 

Carbonyl Compounds. Cychc ketals and acetals (dioxolanes) are produced from reaction of propylene oxide with ketones and aldehydes, respectively. Suitable catalysts iaclude stannic chloride, quaternary ammonium salts, glycol sulphites, and molybdenum acetyl acetonate or naphthenate (89—91). Lactones come from Ph4Sbl-cataly2ed reaction with ketenes (92). 

There are a vast number of quaternary ammonium compounds or quaternaries (1). Many are naturally occurring and have been found to be cmcial in biochemical reactions necessary for sustaining life. A wide range of quaternaries are also produced synthetically and are commercially available. Over 204,000 metric tons of quaternary ammonium compounds are produced aimuaHy in the United States (2). These have many diverse appHcations. Most are eventually formulated and make their way to the marketplace to be sold in consumer products. AppHcations range from cosmetics (qv) to hair preparations (qv) to clothes softeners, sanitizers for eating utensils, and asphalt emulsions. 

Chemical Properties. Reactions of quaternaries can be categorized iato three types (169) Hoffman eliminations, displacements, and rearrangements. Thermal decomposition of a quaternary ammonium hydroxide to an alkene, tertiary amine, and water is known as the Hoffman elimination (eq. la) (170). This reaction has not been used extensively to prepare olefins. Some cycHc olefins, however, are best prepared this way (171). Exhaustive methylation, followed by elimination, is known as the Hoffman degradation and is important ia the stmctural determination of unknown amines, especially for alkaloids (qv) (172). 

Quaternary ammonium alkyl ethers are prepared similarly an alkaline starch is reacted with a quaternary ammonium salt containing a 3-chloto-2-hydtoxyptopyl or 2,3-epoxyptopyl radical. Alternatively, such derivatives can be prepared by simple quaternization of tertiary aminoalkyl ethers by reaction with methyl iodide. Sulfonium (107) and phosphonium (108) starch salts have also been prepared and investigated. Further work has explained the synthesis of diethyl aminoethyl starch (109) as well as the production of cationic starches from the reaction of alkaline starch with... 

The reaction of higher alkyl chlorides with tin metal at 235°C is not practical because of the thermal decomposition which occurs before the products can be removed from the reaction zone. The reaction temperature necessary for the formation of dimethyl tin dichloride can be lowered considerably by the use of certain catalysts. Quaternary ammonium and phosphonium iodides allow the reaction to proceed in good yield at 150—160°C (109). An improvement in the process involves the use of amine—stannic chloride complexes or mixtures of stannic chloride and a quaternary ammonium or phosphonium compound (110). Use of these catalysts is claimed to yield dimethyl tin dichloride containing less than 0.1 wt % trimethyl tin chloride. Catalyzed direct reactions under pressure are used commercially to manufacture dimethyl tin dichloride. 

This reaction gives fair-to-good yields of monoorganotin tribromides and trichlorides when quaternary ammonium or phosphonium catalysts are used (149). Better yields are obtained with organic bromides and staimous bromide than with the chlorides. This reaction is also catalyzed by tri alkyl antimony compounds at 100—160°C, bromides are more reactive than chlorides in this preparation (150,151). a,C0-Dihaloalkanes also react in good yield giving CO-haloalkyltin trihaHdes when catalyzed by organoantimony compounds (152). 

In the case of nicotinamide, the color yield is often low. This problem can be circumvented by either hydrolysis to nicotinic acid or by conversion of the amide to a fluorescent compound. Treatment of nicotinamide with methyl iodide yields the quaternary ammonium salt, /V-methyl nicotinamide (5). Reaction of this compound with acetophenone yields a fluorescent adduct (49). Other carbonyl compounds have also been used (50—54). 

Methyl bromide slowly hydrolyzes in water, forming methanol and hydrobromic acid. The bromine atom of methyl bromide is an excellent leaving group in nucleophilic substitution reactions and is displaced by a variety of nucleophiles. Thus methyl bromide is useful in a variety of methylation reactions, such as the syntheses of ethers, sulfides, esters, and amines. Tertiary amines are methylated by methyl bromide to form quaternary ammonium bromides, some of which are active as microbicides. 

Phase-tiansfei catalysis (PTC) is a technique by which leactions between substances located in diffeient phases aie biought about oi accelerated. Typically, one OI more of the reactants are organic Hquids or soHds dissolved in a nonpolar organic solvent and the coreactants are salts or alkah metal hydroxides in aqueous solution. Without a catalyst such reactions are often slow or do not occur at ah the phase-transfer catalyst, however, makes such conversions fast and efficient. Catalysts used most extensively are quaternary ammonium or phosphonium salts, and crown ethers and cryptates. Although isolated examples of PTC can be found in the early Hterature, it is only since the middle of the 1960s that the method has developed extensively. 

Reactions of the Side Chain. Benzyl chloride is hydrolyzed slowly by boiling water and more rapidly at elevated temperature and pressure in the presence of alkaHes (11). Reaction with aqueous sodium cyanide, preferably in the presence of a quaternary ammonium chloride, produces phenylacetonitrile [140-29-4] in high yield (12). The presence of a lower molecular-weight alcohol gives faster rates and higher yields. In the presence of suitable catalysts benzyl chloride reacts with carbon monoxide to produce phenylacetic acid [103-82-2] (13—15). With different catalyst systems in the presence of calcium hydroxide, double carbonylation to phenylpymvic acid [156-06-9] occurs (16). Benzyl esters are formed by heating benzyl chloride with the sodium salts of acids benzyl ethers by reaction with sodium alkoxides. The ease of ether formation is improved by the use of phase-transfer catalysts (17) (see Catalysis, phase-thansfer). 

The benzylation of a wide variety of aHphatic, aromatic, and heterocycHc amines has been reported. Benzyl chloride is converted into mono-, di-, and tribenzyl amines by reaction with ammonia. Benzylaniline [103-32-2] results from the reaction of benzyl chloride with aniline. Reaction with tertiary amines yields quaternary ammonium salts with trialkylpbospbines, quaternary phosphonium salts and with sulfides, sulfonium salts are formed. 

Nearly all uses and appHcations of benzyl chloride are related to reactions of the active haUde substituent. More than two-thirds of benzyl chloride produced is used in the manufacture of benzyl butyl-phthalate, a plasticizer used extensively in vinyl flooring and other flexible poly(vinyl chloride) uses such as food packaging. Other significant uses are the manufacture of benzyl alcohol [100-51-6] and of benzyl chloride-derived quaternary ammonium compounds, each of which consumes more than 10% of the benzyl chloride produced. Smaller volume uses include the manufacture of benzyl cyanide [140-29-4], benzyl esters such as benzyl acetate [140-11-4], butyrate, cinnamate, and saUcylate, benzylamine [100-46-9], and benzyl dimethyl amine [103-83-8], and -benzylphenol [101-53-1]. In the dye industry benzyl chloride is used as an intermediate in the manufacture of triphenylmethane dyes (qv). First generation derivatives of benzyl chloride are processed further to pharmaceutical, perfume, and flavor products. 

Etherification. A mixture of ethylene chlorohydrin ia 30% aqueous NaOH may be added to phenol at 100—110°C to give 2-phenoxyethanol [122-99-6] ia 98% yield (39). A cationic starch ether is made by reaction of a chlorohydfin-quaternary ammonium compound such as... 

QuaterniZation. Choline chloride [67-48-1] was prepared ia nearly quantitative yield by the reaction of trimethylamine [121-44-8] with ethylene chlorohydrin at 90—105°C and 981—1471 kPa (10—15 kg/cm ) pressure (44). Precursors to quaternary ammonium amphoteric surfactants have been made by reaction of ethylene chlorohydrin with tertiary amines containing a long chain fatty acid group (45). 

Epoxy/Carboxy Cure Sites. Epoxy/carboxy cure sites probably represent the most important alternative to labile chlorine containing monomers. There has been increasing interest in them due to the discovery of the highly efficient quaternary ammonium salt-based accelerators (29—34). The reaction between the epoxy ring and carboxyUc acid can happen in the following three ways ... 

The classical structures of pyrrole, furan and thiophene (31) suggest that these compounds might show chemical reactions similar to those of amines, ethers and thioethers (32) respectively. On this basis, the initial attack of the electrophile would be expected to take place at the heteroatom and lead to products such as quaternary ammonium and oxonium salts, sulfoxides and sulfones. Products of this type from the heteroaromatic compounds under consideration are relatively rare. 

---