Big Chemical Encyclopedia

Chemical substances, components, reactions, process design ...

Articles Figures Tables About

Strong-base anion exchangers

Strong"Base. Strong base anion-exchange resins have quaternary ammonium groups, - NR OH , where R is usually CH, as the functional exchange sites (see Quaternary ammonium compounds). These resins are used most frequentiy in the hydroxide form for acidity reduction. [Pg.372]

Strong Base Anion Exchangers. As ia the synthesis of weak base anion exchangers, strong base resias are manufactured from styrenic as well as acryhc copolymers. Those based on copolymers of styrene and divinylben2ene are chloromethylated and then aminated. These reactions are the same as for the styrenic weakbase resias. The esseatial differeace is the amine used for amination. Trimethyl amine [75-50-3] N(CH2)3, and /V, /V- dim ethyl eth a n ol amine [108-01 -0] (CH2)2NCH2CH20H, are most commonly used. Both form quaternary ammonium functional groups similar to (8). [Pg.375]

Eig. 5. Pressure drop as affected by resin type, flow rate, and temperature, where A, B, and C, correspond respectively to acryUc strong base anion exchanger (Amberlite IRA-458), styrenic strong base anion exchanger (Amberlite IRA-402), and styrenic strong acid cation exchanger (Amberlite IR-120), all at 4°C. D represents styrenic strong acid cation resin (Amberlite IR-120) at 50°C (14). To convert kg/(cm -m) to lb/(in. -ft), multiply by 4.33 to convert... [Pg.379]

When strong acid cation exchangers are used in the Na" form and strong base anion exchangers are used in the CL form, they are regenerated with a 10% sodium chloride [7647-14-5], NaCl, solution. Other concentrations may be used, perhaps with some adjustment in flow rate. [Pg.384]

Boron Removal. Boron [7440-42-8] is occasionaHy present in water suppHes at an unacceptable level. It cannot be removed with the standard anion-exchange resins unless the water is deionized. Selective removal is possible by using an anion exchanger functionalized with /V-methy1g1ucamine [6284-40-8]. This resin is in limited commercial supply. The borate form of conventional strong base anion exchangers is used in some nuclear reactors to adjust the concentration of boron in water used as a moderator. The resin releases boron as the water temperature rises. [Pg.386]

Uranium ores are leached with dilute sulfuric acid or an alkaline carbonate [3812-32-6] solution. Hexavalent uranium forms anionic complexes, such as uranyl sulfate [56959-61-6], U02(S0 3, which are more selectively adsorbed by strong base anion exchangers than are other anions in the leach Hquors. Sulfate complexes are eluted with an acidified NaCl or ammonium nitrate [6484-52-2], NH NO, solution. Carbonate complexes are eluted with a neutral brine solution. Uranium is precipitated from the eluent and shipped to other locations for enrichment. Columnar recovery systems were popular in South Africa and Canada. Continuous resin-in-pulp (RIP) systems gained popularity in the United States since they eliminated a difficult and cosdy ore particle/leach hquor separation step. [Pg.387]

Carboxyiic acid-type Strong Base, anion exchangers... [Pg.40]

Strong acid cation exchanger Strong base anion exchanger... [Pg.394]

Strong base anion exchangers Duolite A113 Duolite A116 Duolite A161 Amberlite 400 Amberlite 410 Amberlite 900 Dowex 1 Dowex 2 AG1 AGMP-1 ... [Pg.189]

In IC this problem of electrolyte background is overcome by means of eluant suppression. Thus in the above example of sodium and potassium analysis, if the effluent from the separating column is passed through a strong base anion exchange resin in the hydroxide form (suppressor column) the following two processes occur ... [Pg.198]

Krishnamoorthy and Iyer [105] have reported a method for determining nanogram levels of iodide in saline water samples containing a large excess of interfering chloride ions. The anions are first bound to a strong base anion exchanger, from which the chloride ion is readily eluted. The iodide is then eluted with 2 M ammonium nitrate and the iodide is determined based on its catalytic effect on the reduction of cerium (IV) by arsenic (III). The method is claimed to have an accuracy comparable to that obtained by NAA. [Pg.84]

Strong acid cation exchangers, 74 411 Strong base anion-exchange resins, 74 382-383... [Pg.891]

Strong base anion exchangers, 74 395, 411 Strong inversion, in silicon-based semiconductors, 22 239 Strong nitric acid process, materials of construction for, 77 187-188 Strong phosphoric acids, equilibrium composition of, 78 827t Strontianite, 23 317, 321 Strontium (Sr) 23 316-325 chemical properties of, 23 318 economic aspects of, 23 320-321 effect of micro additions on silicon particles in Al-Si alloys, 2 311-312 in ferrites, 77 59... [Pg.891]

A. (1994) Hofman degradation of strong base anion exchange resin. Proceedings of the 68th Autumn Annual Meeting of the Chemical Society of Japan, Nagoya October 1994,... [Pg.45]


See other pages where Strong-base anion exchangers is mentioned: [Pg.590]    [Pg.591]    [Pg.591]    [Pg.592]    [Pg.377]    [Pg.377]    [Pg.378]    [Pg.380]    [Pg.380]    [Pg.382]    [Pg.384]    [Pg.384]    [Pg.386]    [Pg.386]    [Pg.387]    [Pg.387]    [Pg.388]    [Pg.1506]    [Pg.22]    [Pg.22]    [Pg.384]    [Pg.290]    [Pg.291]    [Pg.754]    [Pg.1589]    [Pg.15]    [Pg.150]    [Pg.147]    [Pg.12]    [Pg.980]    [Pg.40]    [Pg.246]    [Pg.248]    [Pg.254]    [Pg.255]    [Pg.256]   
See also in sourсe #XX -- [ Pg.268 ]




SEARCH



Anion exchange

Anion exchanger

Anion strong

Anionic exchange

Anionic exchangers

Anions anion exchange

Exchangeable Bases

Strong anion-exchange

Strong anionic exchange

Strong base anion-exchange resins

© 2024 chempedia.info