Quantum yield enhancement

The results indicated that the cycloreversion quantum yields enhanced significantly when the electron-donating groups were substituted at 2-position of the benzene ring of these diarylethenes, while the cyclization quantum yields improved remarkably when the electron-withdrawing groups were substituted at the same position. 

Molecular fluorescence and, to a lesser extent, phosphorescence have been used for the direct or indirect quantitative analysis of analytes in a variety of matrices. A direct quantitative analysis is feasible when the analyte s quantum yield for fluorescence or phosphorescence is favorable. When the analyte is not fluorescent or phosphorescent or when the quantum yield for fluorescence or phosphorescence is unfavorable, an indirect analysis may be feasible. One approach to an indirect analysis is to react the analyte with a reagent, forming a product with fluorescent properties. Another approach is to measure a decrease in fluorescence when the analyte is added to a solution containing a fluorescent molecule. A decrease in fluorescence is observed when the reaction between the analyte and the fluorescent species enhances radiationless deactivation, or produces a nonfluorescent product. The application of fluorescence and phosphorescence to inorganic and organic analytes is considered in this section. 

Irradiation of coordination compounds in the charge-transfer spectral region can often enhance redox reactions. The quantum yields are variable. 

However, the method will not enhance the external quantum yield of the LED, moreover, proper optical coupling between the layers has to be achieved in order not to decrease the QY loo much [61. One of the obvious problems is the principal requirement of having the ITO-covered glass substrate between the color converter and the cmitLer layer. This can also lead to color bleeding, an effect where the emitter layer excites not only the conversion layer, it is supposed to address but also neighboring ones. 

Solid-surface room-temperature phosphorescence (RTF) is a relatively new technique which has been used for organic trace analysis in several fields. However, the fundamental interactions needed for RTF are only partly understood. To clarify some of the interactions required for strong RTF, organic compounds adsorbed on several surfaces are being studied. Fluorescence quantum yield values, phosphorescence quantum yield values, and phosphorescence lifetime values were obtained for model compounds adsorbed on sodiiun acetate-sodium chloride mixtures and on a-cyclodextrin-sodium chloride mixtures. With the data obtained, the triplet formation efficiency and some of the rate constants related to the luminescence processes were calculated. This information clarified several of the interactions responsible for RTF from organic compounds adsorbed on sodium acetate-sodium chloride and a-cyclodextrin-sodium chloride mixtures. Work with silica gel chromatoplates has involved studying the effects of moisture, gases, and various solvents on the fluorescence and phosphorescence intensities. The net result of the study has been to improve the experimental conditions for enhanced sensitivity and selectivity in solid-surface luminescence analysis. 

Chlorine-enhancement may offer a partial solution. The addition of the chlorinated olefin TCE, PCE, or TCP to air/contaminant mixtures has recently been demonstrated to increase quantum yields substantially [1, 2, 6]. We recently have extended this achievement [3], to demonstrate TCE-driven high quantmn efficiency conversions at a reference feed concentration of 50 mg contaminant/m air not only for toluene but also for other aromatics such as ethylbenzene and m-xylene, as well as the volatile oxygenates 2-butanone, acetaldehyde, butsraldehyde, 1-butanol, methyl acrylate, methyl-ter-butyl-ether (MTBE), 1,4 dioxane, and an alkane, hexane. Not 1 prospective contaminants respond positively to TCE addition a conventional, mutual competitive inhibition was observed for acetone, methanol, methylene chloride, chloroform, and 1,1,1 trichloroethane, and the benzene rate was altogether unaffected. 

Side-chain photochlorination of toluene isocyanates yields important industrial intermediates for polyurethane synthesis, one of the most important classes of polymers [6]. The motivation for micro-channel processing stems mainly from enhancing the performance of the photo process. Illuminated thin liquid layers should have much higher photon efficiency (quantum yield) than given for conventional processing. In turn, this may lead to the use of low-intensity light sources and considerably decrease the energy consumption for a photolytic process [6] (see also [21]). 

In the emission spectra of coumarins 9a, 10a, 10c, and 9d in BSA/SDS mixture, the most pronounced bands revealed similar wavelengths to those in the presence of BSA. Observed Stokes shifts values for dyes 9a-d and lOa-d occurred between 8 and 102 nm. The fluorescence increase of the dye upon BSA/SDS addition varied from 2.5 times (9b) to 330 times (lOd), while the brightest complex resulted from dye 10a, its quantum yield being about 0.27. Despite the observed emission enhancement value, the fluorescence intensity of other coumarin dyes in the presence of BSA/SDS mixture was only low to moderate. 

The significant enhancement in emission quantum yields and lifetimes suggests that 3 can be used as a noncovalent probe in immunochemical assay and biophysical studies. This dye is quite soluble in aqueous buffer and interacts with... 

Dialkylanthracene-containing squaraine dyes 17 show intense absorption and emission in the NIR region (720-810 nm) [74]. They are compatible with aqueous environments and show substantial enhancement of quantum yields and fluorescence lifetimes in hydrophobic and micellar media, suggesting that these dyes can be potentially useful as fluorescent probes in biological applications, e.g., for imaging of hydrophobic domains such as cell membranes. 

---