Quality external

Actions and Uses. — Internally —In excessive doses, irritant poison in medicinal doses, anthelmintic, but is very seldom employed for this purpose, on account of its violent and uncertain irritant qualities. Externally —Stimulant to ill-conditioned wounds and indolent sores also used for maintaining the action of, and keeping up the discharge from, blisters and setons. 

The tubes which were made by pultrusion (which guarantees good mechanical characteristics), were of good quality (external aspect, lack of defects, regular dimensions, etc) and this led to very good test results ... 

A company rendering services in NDT for internal or external customers shall establish and improve the testing quality through management of processes and their interaction. 

The goals of quality assessment are to determine when a system has reached a state of statistical control to detect when the system has moved out of statistical control and, if possible, to suggest why a loss of statistical control has occurred so that corrective actions can be taken. For convenience, the methods of quality assessment are divided into two categories internal methods that are coordinated within the laboratory and external methods for which an outside agency or individual is responsible. The incorporation of these methods into a quaKty assurance program is covered in Section 15C. 

Internal methods of quality assessment should always be viewed with some level of skepticism because of the potential for bias in their execution and interpretation. For this reason, external methods of quality assessment also play an important role in quality assurance programs. One external method of quality assessment is the certification of a laboratory by a sponsoring agency. Certification is based on the successful analysis of a set of proficiency standards prepared by the sponsoring agency. For example, laboratories involved in environmental analyses may be required to analyze standard samples prepared by the Environmental Protection... 

A standard sample provided by an external agency as part of certifying the quality of a laboratory s work. 

Agency. A second example of an external method of quality assessment is the voluntary participation of the laboratory in a collaborative test (Chapter 14) sponsored by a professional organization such as the Association of Official Analytical Chemists. Finally, individuals contracting with a laboratory can perform their own external quality assessment by submitting blind duplicate samples and blind standard samples to the laboratory for analysis. If the results for the quality assessment samples are unacceptable, then there is good reason to consider the results suspect for other samples provided by the laboratory. 

The thermal quality of the solvent feed has no effect on the value of (S/F)mjn, but does affect the minimum reflux to some extent, especially as the (S/F) ratio increases. R nax occurs at higher values of the reflux ratio as the upper-feed quality decreases a subcooled upper feed provides additional refluxing capacity and less external reflux is required for the same separation. It is also sometimes advantageous to introduce the primary feed to the extractive distillation column as a vapor to help maintain a higher solvent concentration on the feed tray and the trays immediately below... 

You should consider obtaining internal and external quality assurance reviews of the study (to ferret out errors in modeling, data, etc.). Independent peer reviews of the QRA results can be helpful by presenting alternate viewpoints, and you should include outside experts (either consultants or personnel from another plant) on the QRA review panel. You should also set up a mechanism wherein disputes between QRA team members (e.g., technical arguments about safety issues) can be voiced and reconciled. All of these factors play an essential role in producing a defendable, high-quality QRA. Once the QRA is complete, you must formally document your response to the project team s final report and any recommendations it contains. 

Up to 90% of the total quality cost is due to failure, both internal and external, with around 50% being the average (Crosby, 1969 Russell and Taylor, 1995 Smith, 1993). A survey of UK manufacturing companies in 1994 found that failure under the various categories was responsible for 40% of the total cost of quality, followed by appraisal at 25%, and then prevention costs at 18%. This is shown in Figure 1.6. Of the companies surveyed, 17% were unsure where their quality costs originated, but indicated that these costs could be attributable to failure, either internally or externally. 

TQM involves all the organizations, all the functions, the external suppliers, the external customers and involves the quality policy. Similarly, TQM cannot be achieved without good Quality Management Systems (QMS) which bring together all functions relevant to the product, providing policies, procedures and documentation. The elements of a quality organization consist of these three mutually dependent items (Field and Swift, 1996) ... 

In addition to fulfilling the in-house requirements for quality control, state and local air monitoring networks which are collecting data for compliance purposes are required to have an external performance audit on an annual basis. Under this program, an independent organization supplies externally calibrated sources of air pollutant gases to be measured by the instrumentation undergoing audit. An audit report summarizes the performance of the instruments. If necessary, further action must be taken to eliminate any major discrepancies between the internal and external calibration results. 

Since the reliability of gas turbines in the power industry has been lower than desired in recent years because of hot-corrosion problems, techniques have been developed to detect and control the parameters that cause these problems. By monitoring the water content and corrosive contaminant in the fuel line, any changes in fuel quality can be noted and corrective measures initiated. The concept here is that Na contaminants in the fuel are caused from external sources such as seawater thus, by monitoring water content, Na content is automatically being monitored. This on-line technique is adequate for lighter distillate fuels. For heavier fuels, a more complete analysis of the fuel should be carried out at least once a month using the batch-type system. The data should be input directly to the computer. The water and corrosion detecting systems also operate in conjunction with the batch analysis for the heavier fuels. 

A useftil applicadon of time-dependent PL is the assessment of the quality of thin III-V semiconductor alloy layers and interfaces, such as those used in the fabri-cadon of diode lasers. For example, at room temperature, a diode laser made with high-quality materials may show a slow decay of the acdve region PL over several ns, whereas in low-quality materials nonradiative centers (e.g., oxygen) at die cladding interface can rapidly deplete the free-carder population, resulting in much shorter decay times. Measurements of lifetime are significandy less dependent on external condidons than is the PL intensity. 

Step 1.3 Identify and Allocate Additional Resources. The audit may require external resources, such as laboratory facilities and possibly equipment for air sampling, flow measurements, energy measurements, and product-quality testing. 

Outdoor inhalation exposure is mainly due to traffic, energy production, heating, and natural factors such as pollen and mineral dusts. These outdoor sources of pollution also affect indoor air quality. The indoor concentration is typically 20-70% of the corresponding outdoor concentration. Occasionally the indoor concentrations of an external pollutant (especially radon) may even exceed the concentrations outdoors. ... 

---