Property generated

Despite all the intellectual property generated in this field, the application has not reached commercial scale. It does not mean that there has not been any progress. In fact, the biocatalyst development has greatly advanced, much of it due to the advancements in the techniques, methods and tools related to MB and GE. MB techniques raised the understanding of the biocatalyst from the level of whole cells to clearly defined... 

Intellectual Property A review of intellectual property, relevant to the project, is requested as part of the application. The guidelines for ownership of intellectual property generated will vary with each project and generally depend on the stage of the project. 

An integral part of a fibre optic sensor is the light source. Its primary task is to deliver an appropriate light, which possesses such features as an optical power suitable to interact with an analyte or an indicator from the optrode, a wavelength matched to the spectral properties of the sensors in order to obtain the highest sensitivity, and, in dependence on the construction of the sensor, polarisation, short pulse etc. There are many various light sources utilised in the fibre optic chemical sensors. They differ in spectral properties, generated optical power and coherence. 

Property Generation 1 (18% renewable carbon) Generation 2 (14% renewable carbon) Units... 

The value of the PSpICe Template property generates the PSpice netlist line for the resistor when you create a netlist for the schematic. The TC property is a temperature coefficient for the resistor. Its default is zero (no temperature dependence). The property Value is the value of the resistor in ohms. The Source Library (not shown in the screen captures above) is the name of the. olb file in which the part is located. 

Qualitative process approach Elimination of weak candidates Pharmaceutical properties Generate information to stop development. Development of a new application and implemented during early stages of development. Integrated with sample generation. Interlaboratory integration (i.e., predictive models). 

Today much if not most federal research, including biomass-related research, is done in partnership with private companies that have the right to exclusively own the intellectual property generated from that collaboration. 

Based on the above observations, the importance of patent protection of biotechnology inventions is clear, as well as the need for professionals trained to take care of the protection and licensing of the intellectual property generated by universities, research institutions, and companies. 

This property generates an effect that makes the use of GME of a given age questionable. If we perturb the GME of a given age with an external field at times t > ta, the GME response might not have anything to do with the... 

In a relatively few years zeolites were promoted from simple adsorption agents to catalysts of wide spread use in all fields of chemistry. Apart from their acidic properties generated by exchanging their Na+ or K+ starting forms by ammonium ions and subsequent decomposition of the latter, their unique properties as supports for various precious metals and their solution behaviour attracted much of the attention devoted to catalysis. 

Frequently the integral form of the conservation la v of the property is particularized as total and partial mass balance and also as energy or thermal balance [3.7]. For each particularization, a control volume must be selected in order to have a form capable of permitting the computation of each integral from the relation (3.5). As an initial condition, we have to declare the property, the transport vector and the property generation rate. Figure 3.2 presents the way to obtain the equations of the differential balance of total mass, mass species and energy (heat). The... 

In this Section, we report on transport properties generated from the non-reactive simulations in the first task and discuss work in progress on extracting transport properties from the reactive simulations in task II applied to PFSA membranes. 

It will be shown that the level of uniaxial orientation and the variation of local mechanical properties generated by controlling the injection temperature can be conveniently characterized by microhardness measurement in combination with the measurement of optical birefringence An and DSC. In Section 2.7 we saw that microhardness is a very useful mechanical property, which can provide direct information about the anisotropy developed within highly oriented polymers. 

Third, the gel times of nylon systems are much longer than those of urethanes, typically on cue order of 45 to 120 seconds, versus 5 to 30 seconds for urethanes. There are several reasons for this. First, the polymer is soluble in the monomer until very high molecular weights are attained. Second, the reactants are typically held at temperatures 30 to 90°F lower than the mold temperatures for reasons of energy conservation and product stability. At these temperatures, polymerization rate is low and pot life of the mixed stream is on the order of 5-10 minutes. For optimum physical property generation, part surface quality and release from the tool, nylon RIM molds are normally run at temperatures between 250 and 325°F. At these temperatures, gel times are typically 30 to 60 seconds for parts of about 1/8-inch thickness. Thus, part of the gel time difference is the time reauired for the reactants to rise to mold temperature by conductive heating. 

A novel, photodefinable, polymeric material was formulated to meet the needs of a particular circuit technology. Rubber modification of a thermoset resin with good thermal, chemical, and electrical properties generated a formulation that met stringent processing and reliability requirements. 

Material Variables. Figures 3-12 illustrate the effect of material variables on the properties generated in Tests 1-4. The asphalt cement used in these tests was AC-10 (106 penetration) and the aggregate was the poorly graded beach sand (Sand I). Comparative results using the concrete sand (Sand II) and a softer asphalt AC-5 (195 penetration) will be presented later. 

The substitution of cobalt for the native zinc ions of alkaline phosphatase results in an active enzyme with distinctive optical properties, generated by the interaction of cobalt with the ligands of the protein. These properties may be employed to investigate the modes of binding of cobalt to the enzyme and also serve in a remarkable fashion to distinguish the catalytically essential metal atoms from those which play only a structural role. 

A commercial property based whole business securitisation, where a portfolio of properties generates the principal revenues in support of the business. Deals such as pub or healthcare transactions typically fall into this category. Such deals can range from a single asset to the highly diversified portfolio (by number if not by industry exposure). 

Moskal G. 2009. Thermal barrier coatings characteristics of microstructure and properties, generation and directions of development of bond. Journal of Achievements in Materials and Manifacturing Engineering 37, 2, 323-331. 

---