Potassium butyrates

Potassium Pyroracemate and Potassium Butyrate unite to form methylpropylketone ... 

The method of von Miller/3 electrolyzing potassium ethyl--malonate with potassium salts 0 aliphatic carboxylic acids, also gives satisfactory results. If potassium acetate is chosen as the second component of the electrolytic mixture, propionic ethyl ester is formed and likewise by using potassium propionate or potassium butyrate we obtain butyric ethyl ester or valeric ethyl ester respectively. 

The electrolysis of the ester-salt of benzylmalonic acid with potassium butyrate and caproate takes place just as with potassium acetate. Good yields of propylhydrocinnamic ester and amylhydrocinnamic ester, besides dibenzylsuccinic ester and cinnamic and hydrocinnamic esters, are obtained. 

Butyroin has been prepared by reductive condensation of ethyl butyrate with sodium in xylene, or with sodium in the presence of chloro-trimethylsilane. and by reduction of 4,5-octanedlone with sodium l-benzyl-3-carbamoyl-l,4-dihydropyridine-4-sulfinate in the presence of magnesium chloride or with thiophenol in the presence of iron polyphthalocyanine as electron transfer agent.This acyloin has also been obtained by oxidation of (E)-4-octene with potassium permanganate and by reaction of... 

Methylsuccinic acid has been prepared by the pyrolysis of tartaric acid from 1,2-dibromopropane or allyl halides by the action of potassium cyanide followed by hydrolysis by reduction of itaconic, citraconic, and mesaconic acids by hydrolysis of ketovalerolactonecarboxylic acid by decarboxylation of 1,1,2-propane tricarboxylic acid by oxidation of /3-methylcyclo-hexanone by fusion of gamboge with alkali by hydrog. nation and condensation of sodium lactate over nickel oxide from acetoacetic ester by successive alkylation with a methyl halide and a monohaloacetic ester by hydrolysis of oi-methyl-o -oxalosuccinic ester or a-methyl-a -acetosuccinic ester by action of hot, concentrated potassium hydroxide upon methyl-succinaldehyde dioxime from the ammonium salt of a-methyl-butyric acid by oxidation with. hydrogen peroxide from /9-methyllevulinic acid by oxidation with dilute nitric acid or hypobromite from /J-methyladipic acid and from the decomposition products of glyceric acid and pyruvic acid. The method described above is a modification of that of Higginbotham and Lapworth. ... 

As previously discussed, solvents that dissolve cellulose by derivatization may be employed for further functionahzation, e.g., esterification. Thus, cellulose has been dissolved in paraformaldehyde/DMSO and esterified, e.g., by acetic, butyric, and phthalic anhydride, as well as by unsaturated methacrylic and maleic anhydride, in the presence of pyridine, or an acetate catalyst. DS values from 0.2 to 2.0 were obtained, being higher, 2.5 for cellulose acetate. H and NMR spectroscopy have indicated that the hydroxyl group of the methy-lol chains are preferably esterified with the anhydrides. Treatment of celliflose with this solvent system, at 90 °C, with methylene diacetate or ethylene diacetate, in the presence of potassium acetate, led to cellulose acetate with a DS of 1.5. Interestingly, the reaction with acetyl chloride or activated acid is less convenient DMAc or DMF can be substituted for DMSO [215-219]. In another set of experiments, polymer with high o -celliflose content was esterified with trimethylacetic anhydride, 1,2,4-benzenetricarboylic anhydride, trimellitic anhydride, phthalic anhydride, and a pyridine catalyst. The esters were isolated after 8h of reaction at 80-100°C, or Ih at room temperature (trimellitic anhydride). These are versatile compounds with interesting elastomeric and thermoplastic properties, and can be cast as films and membranes [220]. 

Figure 9 Three-dimensional cationic CITP of (A) blank (B) lysozyme (LYSO), creatinine (CREAT), conalbumin (CAL), y-amino-n-butyric acid (GABA), and ovalbumin (OVA) (C) OVA spiked with CREAT and GABA. Capillary 90 cm (length to the detector, 70 cm) x 75 p i.d. leader 10 mM potassium acetate and acetic acid with 0.3% HPMC, pH 4.75 terminator 10 mM acetic acid sample 10 to 30 mg/ml proteins dissolved in leader without HPMC voltage 20 kV. (From Gebauer, P. and Thormann, W.,. Chromatogr., 558, 423, 1991. With permission.)...

The synthetic procedure used for the chemical modification of PPO involved in the first step the radical bromination of PPO methyl groups to provide a polymer containing bromobenzyl groups. The bromobenzyl groups were then esterified under phase-transfer-catalyzed (PTC) reaction conditions with potassium 4-(4-oxybiphenyl)butyrate (Ph3C00K, Ph3C00-PP0), potassium... 

The mesogenic units with methylenic spacers were prepared by reacting the sodium salt of either 4-methoxy-4 -hydroxybiphenyl or 4-phenylphenol with a bromoester in DMF at 82° C for at least 4 hours in the presence of tetrabutylammonium hydrogen sulfate (TBAH) as phase transfer catalyst. In this way, ethyl 4-(4-oxybi-phenyl)butyrate, ethyl 4-(4-methoxy-4 -oxybiphenyl)butyrate, ethyl 4-(4-oxybiphenyl)valerate, ethyl 4-(4-methoxy-4 -oxybiphenyl)-valerate, n-propyl 4-(4-oxybiphenyl)undecanoate and n-propyl 4-(4-methoxy-4 -oxybiphenyl)undecanoate were obtained. These esters were hydrolyzed with base and acidified to obtain the carboxylic acids. The corresponding potassium carboxylates were obtained by reaction with approximately stoichiometric amounts of potassium hydroxide. Experimental details of these syntheses were described elsewhere (27). 

Chau and Terry [146] reported the formation of penta-fluorobenzyl derivatives of ten herbicidal acids including 4-chloro-2-methyl-phenoxy acetic acid [145]. They found that 5h was an optimum reaction time at room temperature with pentafluorobenzyl bromide in the presence of potassium carbonate solution. Agemian and Chau [147] studied the residue analysis of 4-chloro-2-methyl phenoxy acetic acid and 4-chloro-2-methyl phenoxy butyric acid from water samples by making the pentafluorobenzyl derivatives. Bromination [148], nitrification [149] and esterification with halogenated alcohol [145] have also been used to study the residue analysis of 4-chloro-2-methyl phenoxy acetic acid and 4-chloro-2-methyl phenoxybutyric acid. Recently pentafluorobenzyl derivatives of phenols and carboxylic acids were prepared for detection by electron capture at very low levels [150, 151]. Pentafluorobenzyl bromide has also been used for the analytical determination of organophosphorus pesticides [152],... 

The effect of the hydration radius of these cations is very important, and mobilities are sometimes very close or the same as for potassium and ammonium. For this reason, a complexing agent is added to the buffer. Several complexing agents such as a-hydroxyiso-butyric acid (HIBA), 18-crown-6, phthalic, malonic, tartaric, lactic, citric, oxalic, or glycolic acid may be used. 

Hulshof et al. introduced 10 as an alcohol racemization catalyst [31]. Alcohol DKR was performed with 0.1mol% of 10, CALB, isopropyl butyrate as the acyl donor, potassium carbonate and about 20mol% of the corresponding ketone at 70°C (Scheme 1.23). Without the ketone, yield and optical purity of the product ester were decreased significantly. 2-Propanol produced by the acyl transfer reaction was removed at reduced pressure during the DKR to shift the equilibrium to acylated products. 

The corresponding syzz-isomer was, on the other hand, prepared from the potassium permanganate-mediated oxidation of trifluorocrotonate 10, derived from -hydroxy-butyrate. In this procedure, the diol ester with syn relative configuration was the only product detected. After acetylation, syn-11 was employed as a substrate for the enzymatic resolution affording both (2S,3S)-11... 

Table II lists the absorption peaks observed in the 6-micron region for the acid-soaps. With the exception of potassium acid-butyrate all members up to Ci2 have their major absorption peak (underlined in Table II) at 5.82 to 5.9 microns. On the other hand, the acid-soaps of chain length Ci4 or greater have their major C=0 absorption band at 6.1 microns. A sole exception in Table II is the potassium acid-stearate prepared from Eastman fatty acid, whose major absorption peak falls in the range 5.82 to 5.9 microns again.

Isobutyronitrile has been prepared by a number of catalytic vapor-phase reactions at elevated temperatures isobutylamine over copper 2 or nickel,3 isobutyramide over alumina,4 a mixture of ammonia and isobutyraldehyde over thorium dioxide,5 and a mixture of ammonia and isobutyl alcohol over copper. Isobutyronitrile also has been obtained by decarboxylation of 2-methyl-2-cyanopropanoic add 7 and from the reaction of iso-butyric acid with potassium thiocyanate.8 The above procedure is a modification of the method used by Walter and McElvain.9... 

CuH12N504 mw 278.28 N 25.17% OB to C02 —137.99% pale yel silvery flakes (from aq alc) mp, expldsca 130°. Sol inaq ethanol. Prepn is by treating 3.5-diazo-6.6-dimethyl-hexahydro-l,2,4-triazine with a soln of m-nitrobenzenediazonium chloride. The triazine also forms an expl Potassium Salt bright ver-milHon colored ndles expl decompn ca 166° obtd by treating a-ureido-a-m-nitrophenylene diazoamino-i-butyric acid ethyl ester with K ethylate sol in ethanol Refs 1) Beil 26, 222 2) J.R. Bailey L. 

The eag potassium channel can be modulated by cyclic nucleotides and may play a role in ORNs. Patch-clamp recordings from antennal ORNs in eag mutants show fewer neurons responding to ethyl butyrate (Dubin et al., 1998). Application of high K+ saline to the dendritic side of ORNs raises excitability of most wild type neurons but not in eag mutants, suggesting a role for eag in transduction in ORN dendrites rather than during development (Dubin et al., 1998). 

---