Polypyrrole electrically conductive

Functionalized conducting monomers can be deposited on electrode surfaces aiming for covalent attachment or entrapment of sensor components. Electrically conductive polymers (qv), eg, polypyrrole, polyaniline [25233-30-17, and polythiophene/23 2JJ-J4-j5y, can be formed at the anode by electrochemical polymerization. For integration of bioselective compounds or redox polymers into conductive polymers, functionalization of conductive polymer films, whether before or after polymerization, is essential. In Figure 7, a schematic representation of an amperomethc biosensor where the enzyme is covalendy bound to a functionalized conductive polymer, eg, P-amino (polypyrrole) or poly[A/-(4-aminophenyl)-2,2 -dithienyl]pyrrole, is shown. Entrapment of ferrocene-modified GOD within polypyrrole is shown in Figure 7. 

Polypyrroles. Highly stable, flexible films of polypyrrole ate obtained by electrolytic oxidation of the appropriate pyrrole monomers (46). The films are not affected by air and can be heated to 250°C with Htde effect. It is beheved that the pyrrole units remain intact and that linking is by the a-carbons. Copolymerization of pyrrole with /V-methy1pyrro1e yields compositions of varying electrical conductivity, depending on the monomer ratio. Conductivities as high as 10 /(n-m) have been reported (47) (see Electrically conductive polymers). 

Common conductive polymers are poly acetylene, polyphenylene, poly-(phenylene sulfide), polypyrrole, and polyvinylcarba2ole (123) (see Electrically conductive polymers). A static-dissipative polymer based on a polyether copolymer has been aimounced (124). In general, electroconductive polymers have proven to be expensive and difficult to process. In most cases they are blended with another polymer to improve the processibiUty. Conductive polymers have met with limited commercial success. 

Although polyacetylene has served as an excellent prototype for understanding the chemistry and physics of electrical conductivity in organic polymers, its instabiUty in both the neutral and doped forms precludes any useful appHcation. In contrast to poly acetylene, both polyaniline and polypyrrole are significantly more stable as electrical conductors. When addressing polymer stabiUty it is necessary to know the environmental conditions to which it will be exposed these conditions can vary quite widely. For example, many of the electrode appHcations require long-term chemical and electrochemical stabihty at room temperature while the polymer is immersed in electrolyte. Aerospace appHcations, on the other hand, can have quite severe stabiHty restrictions with testing carried out at elevated temperatures and humidities. 

There are several reports of Ag nanocomposites with conducting polymers like polyaniline [38] and polypyrrole [39]. However, electrical conducting properties of green metal - starch... 

The electropolymerisation of the electrically conducting polymers thiophene (mentioned briefly aready in Chapter 5) and polypyrolle are thought to be produced by a scheme to that given in Fig. 6.22. (The scheme shows polypyrrole formation. Polythiophene is similar in that NH is replaced by S.)... 

Polypyrrol is a polymeric support that can be used in immobilization of ONDs to surfaces. The generation of polypyrrol films can be by electrochemical co-polymerization of pyrrole and pyrrole-modified ONDs onto platinum electrodes. The polymer forms a black and insoluble film that is electrically conducting and whose thickness depends on the current used during the polymerization process (Fig. 14). The final surface density of the OND can be controlled by the ratio of pyrrole/OND being polymerized [53-55]. 

Sato K, Yamaura M, Hagiwara T, Murata K, Tokumoto M (1991) Study on the electrical conduction mechanism of polypyrrole films. Synth Met 40 35 8... 

Electrically conducting polymer particles such as polypyrrole and polyaniline could also be prepared by dispersion polymerization in aqueous ethanol (31). The oxidation polymerization of pyrrole and aniline has been carried out at the electrode surfaces so far and formed a thin film of conducting polymer. On the other hand, polypyrrole precipitates as particles when an oxidizing reagent is added to a pyrrole dissolved ethanol solution, which contains a water-soluble stabilizer. In this way electrically conducting polymer particles are obtained and, in order to add more function to them, incorporation of functional groups, such as aldehyde to the surface, and silicone treatment were invented (32). 

Fig. 122. Polymerization of pyrrole monomer in a preformed ferric stearate multilayer film (black dots represent electrically conducting polypyrrole) [764]...

Electrochemical doping of insulating polymers has been attempted for polyacetylene, polypyrrole, poly-A/-vinyl carbazole and phthalocyaninato-poly-siloxane. Significantly, Shirota et al. [91] claim to have achieved the first synthesis of electrically conducting poly(vinyl ferrocene) by the method of electrochemical deposition (ECD) [91]. This is based on the insolubilization of doped polymers from a solution of neutral polymers. A typical procedure applied [91] for polyvinyl ferrocene is to dissolve the polymer in dichlorometh-ane and oxidize it anodically with Ag/Ag+ reference electrode under selective conditions. The modified polymer [91] (Fig. 28) is a partially oxidized mixed valence salt containing ferrocene and ferrocenium ion pendant groups with C104 as the counter anion. 

Comparable to thiophene, pyrrole is a five-membered heterocycle, yet the ring nitrogen results in a molecule with distinctly different behavior and a far greater tendency to polymerize oxidatively. The first report of the synthesis of polypyrrole (PPy) 62 that alluded to its electrically conductive nature was published in 1968 [263]. This early material was obtained via electrochemical polymerization and was carried out in 0.1 N sulfuric acid to produce a black film. Since then, a number of improvements, which have resulted from in-depth solvent and electrolyte studies, have made the electrochemical synthesis of PPy the most widely employed method [264-266]. The properties of electrosynthesized PPy are quite sensitive to the electrochemical environment in which it is obtained. The use of various electrolytes yield materials with pronounced differences in conductivity, film morphology, and overall performance [267-270]. Furthermore, the water solubility of pyrrole allows aqueous electrochemistry [271], which is of prime importance for biological applications [272]. 

The TB MO calculation on the 15N chemical shift of polypyrrole in the solid state allows useful information to be extracted from the observed spectra, namely that the two peaks obtained are correctly assigned to the quinoid and aromatic structures.(l 1,38) ( The quinoid structure is closely to the electric conductivity.) A decrease in the band gap leads to a downfleld shift. These results on conducting polymers demonstrate that the chemical shift behavior provides information about the band gap which, in turn, is a measure of the electric conductivity. It can be said that TB MO calculations offer useful perspectives in interpreting the results of NMR nuclear shieldings in polymers, both in terms of the structure in the solid state and in understanding the effect of intermolecular interactions on nuclear shieldings. The latter are shown to operate through the electronic structures of the polymers considered. 

A more favourable approach is the incorporation of the active species in an electrically conducting polymer layer which then acts as an (electrical) intermediate between the electrode surface and the catalyst. Polypyrrole is considered to be especially suitable because it is acceptably stable under ambient conditions (2), has a high conductivity and can be easily prepared electrochemically from a great variety of solvent systems, including aqueous solutions (3-5). The catalytic species that have been applied in such polypyrrole-based systems comprise metal particles (6-9), metal chelates (10-13) (with anionic side groups) and enzymes (14-18). 

Two nitrogen-containing electroactive polymers, polypyrrole (PPY) [21] and polyaniline (PAN) [22], have been of particular interest because of their environmental stability, high electrical conductivity and interesting redox properties associated with the chain heteroatoms. More importantly, PAN has been found to exhibit solution processability [23, 24] and partial crystallinity [25,26]. 

Several conjugated polymers such as polyaniline, polypyrrole and poly thiophene have been prepared by chemical methods using doping. The electrical conductivity of these polymers has been controlled by (i) the type of dopant, (ii) the concentration of doping, (iii) the conditions of doping (the current density, temperature of reaction, etc.)... 

Polypyrrole composite biomaterials having electrically conductive properties have been prepared using hyaluronic acid or its sodium salt by galvanostatic and potentio-static methods. These agents are useful for preparing medical devices such as nerve and bone regeneration materials. 

Lee [6] observed that when polyaniline or polypyrrole were N-functionalized with Wt-butoxy carbonyl, these materials displayed enhanced physical and mechanical properties with higher solubility and electrical conductivity than the corresponding nonfimctionalized counterparts. 

The discovery that doped forms of polypyrroles conduct electrical current has spurred a great deal of synthetic activity related to polypyrroles [216-218], Reviews are available on various aspects of the synthesis and properties of polypyrroles [219,220]. In addition, summaries of important aspects of polypyrroles are included in several reviews on electrically conducting polymers [221-226]. Polypyrrole has been synthesized by chemical polymerization in solution [227-231], chemical vapor deposition (CVD) [232,233], and electrochemical polymerization [234-240]. The polymer structure consists primarily of units derived from the coupling of the pyrrole monomer at the 2,5-positions [Eq. (84)]. However, up to a third of the pyrrole rings in electrochemically prepared polypyrrole are not coupled in this manner [241]. 

Toward an understanding of the conduction properties of polythiophenes (26) and polypyrroles (25) a large number of soluble oligomers has been prepared. Oligothiophenes, indeed, represent the most common model compounds for electrically conducting polymers [149]. Thereby, lower oligomers... 

---