Polymer-bound additives

Applications Applications of UV/VIS spectrophotometry can be found in the areas of extraction monitoring and control, migration and blooming, polymer impregnation, in-polymer analysis, polymer melts, polymer-bound additives, purity determinations, colour body analysis and microscopy. Most samples measured with UV/VIS spectroscopy are in solution. However, in comparison to IR spectroscopy additive analysis in the UV/VIS range plays only a minor role as only a limited class of compounds exhibits specific absorption bands in the UV range with an intensity proportional to the additive concentration. Characteristic UV absorption bands of various common polymer additives are given in Scheirs [24],... 

Alternatives to off- and on-line chromatography are desirable in order to avoid the time-consuming chromatographic step, and are imperative for polymer-bound additive functionalities. 

Pyrolysis techniques are particularly suited for the more difficult polymer/additive analysis problems on account of intricate architecture and morphological features, e.g. in case of (i) polymer-bound additive functionalities (AOs, FRs) (ii) impact modifiers such as terpolymers (e.g. styrene-hydrogenated butadiene-styrene), graft polymers (e.g. EPM-g-PBT) and an internal rubbery phase in core/shell polymers (e.g. acrylate-based cross-linked polymer) [527] and (Hi) interfacial agents (e.g. graft copolymers, sizings). 

Polymer-bound phenyliodine difluoride, which also has been used as a reagent to add fluorine to alkenes, can be prepared by the addition of xenon difluoride to the polymer [134, 135 136] Methyl iodide is converted to trifluoro methyliodine difluoride by treatment with fluorine at -110 C [137] Perfluoro-alkyliodine tetrafluorides could be synthesized from the perfluoroalkyliodine difluorides and fluorine [138] or chlorine trifluoride [139] Perfluoroalkyl [140] and perfluoroaryl [141] iodides are oxidized to the corresponding iodine difluorides by chlorine trifluoride. 

Dehydration of fi-nitro alcohols using DCC gives a mixnire of E/Z nitroaikenes. The pure fE -isomers are obtained on treatment with catalytic amounts of triethylamine or polymer-bound triphenylphosphme (TPP fEq. 3.281. When (Z) nitroaikenes are desired, the addition of PhSeNa to the E/Z mixnire and protonadon at -78 "C fohowed by oxidadon with gives fZi-nitroalkenes fEq. 3.29. ... 

The great advantage of reactions like Scheme 33 and 34, as compared with the direct attachment of a photola-bile group to the polymer (see Scheme 24) is that in the former systems only polymer bound radicals are formed upon photolysis, whereas in the latter, additionally isolated small radicals are generated. Therefore, less homopolymer is produced in the photolytic step following reactions 33 and 34. 

A remarkable effect of the reaction temperature on the enantioselectivity of the addition of butyllithium to benzaldehyde was found with polystyrene-bound cvs-enofo-S-dimethylamino -(benzyloxy)bornane (8)12. When the soluble monomeric ligand 9 was tested, the enantioselectivity increased with decreasing temperature (53% ee at — 78 C). In contrast, the polymer-bound chiral additive 8 showed an optimum at — 20 C (32% ee). Although the enantioselectivity of this addition reaction is low, an advantage of a polymer-bound chiral auxiliary is that it can be removed by a simple filtration. 

The polymer-bound catalysts A-C. (Table 31) are prepared by reaction of the corresponding amino alcohols with partially chloromethylated 1 -2% cross-linked polystyrene. In the case of A, the enantioselectivity of the addition of dialkylzincs to aldehydes is higher than with the corresponding monomeric ephedrine derivatives (vide supra). Interesting insights into the mechanism of the alkylation of aldehydes by dialkylzinc reagents can be obtained from the experi-... 

An illustrative example of an alternative strategy (cf Fig. 11c) involving the use of a novel traceless linker is found in the multistep synthesis of 6-epi-dysidiolide (363) and several dysidiolide-derived phosphatase inhibitors by Waldmann and coworkers [153], outlined in Scheme 70. During the synthesis, the growing skeleton of 363 remained attached to a robust dienic linker. After completion of intermediate 362, the terminal olefin in 363 was liberated from the solid support by the final metathesis process with concomitant formation of a polymer-bound cyclopentene 364. Notably, during the synthesis it turned out that polymer-bound intermediate 365a, in contrast to soluble benzoate 365b, produced diene 367 only in low yield. After introduction of an additional linker (cf intermediate 366), diene 367 was released in distinctly improved yield by RCM. 

It has been shown that the imidoyl chloride moiety of 2(lff)-pyrazinones can imdergo an easy addition/elimination reaction with alkyl amines [24], while reactions with anilines proceed under harsher conditions. Ullmann coupling [109-113] of 2(lff)-pyrazinones with substituted anilines could open the way to the libraries of physiologically active compounds useful in inhibiting HIV replication [7]. Polymer-bound pyrazinone was successfully... 

A polymer-supported version of our optimal ligand was also developed [52]. Its preparation involves attachment of aziridine carbinols to polymer-bound triphenylchloromethane (Scheme 40). This polymer-bound ligand 53 was almost equally effective in the enantioselective addition of diethylzinc to aromatic and aliphatic aldehydes with ee s ranging from 77-97% for the latter type of substrate [52]. It is of practical interest that this polymer-supported ligand could be reused without losing much of its efficiency. 

An analytical solution for molecules with alkaline functionality is acid/base titration. In this technique, the polymer is dissolved, but not precipitated prior to analysis. In this way, the additive, even if polymer-bound, is still in solution and titratable. This principle has also been applied for the determination of 0.01 % stearic acid and sodium stearate in SBR solutions. The polymer was diluted with toluene/absolute ethanol mixed solvent and stearic acid was determined by titration with 0.1 M ethanolic NaOH solution to the m-cresol purple endpoint similarly, sodium stearate was titrated with 0.05 M ethanolic HC1 solution [83]. Also long-chain acid lubricants (e.g. stearic acid) in acrylic polyesters were quantitatively determined by titration of the extract. 

Polymeric additives, polymer-bound (grafted) additives... 

Deliberate production of (vinyl)polystyrene from (toluenesul-foxyethyl)polystyrene or (haloethyl)polystyrenes was best accomplished by quaternization with N,N-dimethylaminoethanol, followed by treatment with base beta-deprotonation is encouraged in the cyclic zwitterionic intermediate. Reaction was faster and cleaner than with other reagents recommended (64, 76, 77) for eliminations, such as alkoxide, diazabicycloundecene or quaternary ammonium hydroxide this new and efficient procedure may find application elsewhere. Hydrometallation or other additions to polymer-bound olefin may prove useful steps in future syntheses by polymer modification. 

Another approach was developed by Scott in the 1970 s (7.8) which utilises the same mechanochemistry used previously by Watson to initiate the Kharacsh-type addition of substituted alkyl mercaptans and disulphides to olefinic double bonds in unsaturated polymers. More recently, this approach was used to react a variety of additives (both antioxidants and modifiers) other than sulphur-containing compounds with saturated hydrocarbon polymers in the melt. In this method, mechanochemically formed alkyl radicals during the processing operation are utilised to produce polymer-bound functions which can either improve the additive performance and/or modify polymer properties (Al-Malaika, S., Quinn, N., and Scott, 6 Al-Malaika, S., Ibrahim, A., and Scott, 6., Aston University, Birmingham, unpublished work). This has provided a potential solution to the problem of loss of antioxidants by volatilisation or extraction since such antioxidants can only be removed by breaking chemical bonds. It can also provide substantial improvement to polymer properties, for example, in composites, under aggresive environments. 

Properly functionalised additives can react with polymer substrates to produce polymer-bound functions which are capable of effecting the desired modification in polymer properties, hence the use of the term reactive modifiers. As an integral part of the polymer backbone, reactive modifiers are useful vehicles for incorporating the desired chemical functions to suit the specialised application. Being molecularly dispersed, the problem of solubility expressed under 2 above is avoided. Implicitly, the bound-nature of the function is not subjected to the normal problems of the loss of additives from the surface which are common with both high and low molecular mass additives. The bound nature of the function must be fully defined for the conditions of service. 

The mechanoradical produced will react with the small amount of oxygen to form hydroperoxides these are subsequently utilised as radical generators in the second stage. The resulting hydroxyl radical (from hydroperoxide decomposition) abstracts a hydrogen from the substrate to form macroradical which, in turn, will react with more of the thiyl radical to form more bound antioxidant. The polymer bound antioxidant made in this way is very much more resistant to solvent leaching and volatilisation when compared to commercial additives (13). see Figure 2. 

Radiation chemistry in polymer research, 168-169 Reactive macroalkyl radicals, formation, 409 Reactive modifiers addition of reactive antioxidants on rubbers, 417 adhesion, 420,422 demanding applications, 414,416 improving additive performance during melt processing, 412 polymer bound antioxidant, 418-419/ Reduced poly(vinyl chloride),... 

A comparison of the rates showed that the polymer-bound Ti-TADDOLate 88 and the dendritic polymer 89 catalyze the Et2Zn-to-PhCHO addition at a similar fast rate as the monomeric TADDOLate 86 and the dendritic TADDOLate 87 in homogeneous solution [107,112]. Further experiments also with other ligands are being carried out in our laboratories. 

As a suitable model reaction, the coupling of various substituted carboxylic acids to polymer resins has been investigated by Stadler and Kappe (Scheme 7.8) [28]. The resulting polymer-bound esters served as useful building blocks in a variety of further solid-phase transformations. In a preliminary experiment, benzoic acid was attached to Merrifield resin under microwave conditions within 5 min (Scheme 7.8 a). This functionalization was additionally used to determine the effect of micro-wave irradiation on the cleavage of substrates from polymer supports (see Section 7.1.10). The benzoic acid was quantitatively coupled within 5 min via its cesium salt utilizing standard glassware under atmospheric reflux conditions at 200 °C. 

In a recent study, the group of Van der Eycken described the decoration of polymer-bound 2(lH)-pyrazinone scaffolds by performing various transition metal-catalyzed transformations [42]. The readily prepared pyrazinone was specifically decorated at the C3 position by employing microwave-mediated Suzuki, Stille, Sonogashira, and Ullmann protocols (Scheme 7.24), thereby introducing additional diver-... 

Several microwave-assisted protocols for soluble polymer-supported syntheses have been described. Among the first examples of so-called liquid-phase synthesis were aqueous Suzuki couplings. Schotten and coworkers presented the use of polyethylene glycol (PEG)-bound aryl halides and sulfonates in these palladium-catalyzed cross-couplings [70]. The authors demonstrated that no additional phase-transfer catalyst (PTC) is needed when the PEG-bound electrophiles are coupled with appropriate aryl boronic acids. The polymer-bound substrates were coupled with 1.2 equivalents of the boronic acids in water under short-term microwave irradiation in sealed vessels in a domestic microwave oven (Scheme 7.62). Work-up involved precipitation of the polymer-bound biaryl from a suitable organic solvent with diethyl ether. Water and insoluble impurities need to be removed prior to precipitation in order to achieve high recoveries of the products. 

A variation of this method led to the generation of bis-benzimidazoles [81, 82], The versatile immobilized ortho-phenylenediamine template was prepared as described above in several microwave-mediated steps. Additional N-acylation exclusively at the primary aromatic amine moiety was achieved utilizing the initially used 4-fluoro-3-nitrobenzoic acid at room temperature (Scheme 7.72). Various amines were used to introduce diversity through nucleophilic aromatic substitution. Cyclization to the polymer-bound benzimidazole was achieved by refluxing for several hours in a mixture of trifluoroacetic acid and chloroform. Individual steps at ambient temperature for selective reduction, cyclization with several aldehydes, and final detachment from the polymer support were necessary in order to obtain the desired bis-benzimidazoles. A set of 13 examples was prepared in high yields and good purities [81]. 

Additionally, the authors chose 3-chloropropionyl chloride as the immobilized building block in order to carry out a ring-expansion approach, which led to the generation of a 14-member library of thioxotetrahydropyrimidinones [85, 86], The initially prepared polymer-bound chloropropionyl ester was efficiently transformed into the corresponding diamines by transamination utilizing several primary amines. These diamine intermediates could also be obtained by treatment of the pure polymeric support with acryloyl chloride and subsequent addition of the appropriate amines (Scheme 7.74). 

---